From: Shengyu Qu <wiagn233@outlook.com>
To: nbd@nbd.name, lorenzo@kernel.org, ryder.lee@mediatek.com,
shayne.chen@mediatek.com, sean.wang@mediatek.com,
johannes@sipsolutions.net, matthias.bgg@gmail.com,
pkshih@realtek.com, angelogioacchino.delregno@collabora.com,
miriam.rachel.korenblit@intel.com, greearb@candelatech.com,
michael-cy.lee@mediatek.com,
nicolas.cavallari@green-communications.fr,
emmanuel.grumbach@intel.com, christophe.jaillet@wanadoo.fr,
mingyen.hsieh@mediatek.com, chui-hao.chiu@mediatek.com,
quic_adisi@quicinc.com, gustavoars@kernel.org,
sujuan.chen@mediatek.com, bo.jiao@mediatek.com,
linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Cc: wiagn233@outlook.com
Subject: Re: [PATCH v10] wifi: mt76: mt7915: add wds support when wed is enabled
Date: Sun, 23 Mar 2025 00:34:24 +0800 [thread overview]
Message-ID: <TYCPR01MB84373C301DD3430A00E9779D98DA2@TYCPR01MB8437.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <TYCPR01MB84376878FE505F773182062B98D12@TYCPR01MB8437.jpnprd01.prod.outlook.com>
[-- Attachment #1.1.1: Type: text/plain, Size: 10973 bytes --]
Hi Felix,
Do you think this patch is ok?
Best regards,
Shengyu
在 2025/3/11 13:29, Shengyu Qu 写道:
> The current WED only supports 256 wcid, whereas mt7986 can support up to
> 512 entries, so firmware provides a rule to get sta_info by DA when wcid
> is set to 0x3ff by txd. Also, WED provides a register to overwrite txd
> wcid, that is, wcid[9:8] can be overwritten by 0x3 and wcid[7:0] is set
> to 0xff by host driver.
>
> However, firmware is unable to get sta_info from DA as DA != RA for
> 4addr cases, so firmware and wifi host driver both use wcid (256 - 271)
> and (768 ~ 783) for sync up to get correct sta_info.
>
> Currently WDS+WED config is completely broken on MT7986/7981 devices if
> without this patch.
>
> Tested-by: Sujuan Chen <sujuan.chen@mediatek.com>
> Co-developed-by: Bo Jiao <bo.jiao@mediatek.com>
> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
> Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
> ---
> Changes since v1:
> - Drop duplicate setting in mmio
> - Reduce the patch size by redefining mt76_wcid_alloc
> Changes since v2:
> - Rework wds wcid getting flow
> Changes since v3:
> - Rebase to next-20240703
> - Sync with downstream patch
> Changes since v4:
> - Rebase to next-20240802
> Changes since v5:
> - Fixed build test error reported by robot
> - Rebase to next-20240805
> Changes since v6:
> - Fix potential race conditions on tx/rx packets during the transition
> - Rebase to Felix's newest codebase
> Changes since v7:
> - Fix build fail
> Changes since v8:
> - Changed code as Shih advised
> Changes since v9:
> - Changed code as Shih advised
> - Moved mt76_wcid_alloc to mt76.h
> ---
> drivers/net/wireless/mediatek/mt76/mt76.h | 15 ++++++
> .../net/wireless/mediatek/mt76/mt7915/main.c | 53 +++++++++++++++++--
> .../net/wireless/mediatek/mt76/mt7915/mcu.c | 18 +++++--
> .../net/wireless/mediatek/mt76/mt7915/mcu.h | 1 +
> drivers/net/wireless/mediatek/mt76/util.c | 37 +++++++++++--
> drivers/net/wireless/mediatek/mt76/util.h | 2 +-
> 6 files changed, 115 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
> index 132148f7b107..f9f11ce1f3fc 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> @@ -28,6 +28,9 @@
>
> #define MT76_TOKEN_FREE_THR 64
>
> +#define MT76_WED_WDS_MIN 256
> +#define MT76_WED_WDS_MAX 272
> +
> #define MT_QFLAG_WED_RING GENMASK(1, 0)
> #define MT_QFLAG_WED_TYPE GENMASK(4, 2)
> #define MT_QFLAG_WED BIT(5)
> @@ -73,6 +76,12 @@ enum mt76_wed_type {
> MT76_WED_RRO_Q_IND,
> };
>
> +enum mt76_wed_state {
> + MT76_WED_DEFAULT,
> + MT76_WED_ACTIVE,
> + MT76_WED_WDS_ACTIVE,
> +};
> +
> struct mt76_bus_ops {
> u32 (*rr)(struct mt76_dev *dev, u32 offset);
> void (*wr)(struct mt76_dev *dev, u32 offset, u32 val);
> @@ -1165,6 +1174,12 @@ void mt76_wed_dma_reset(struct mt76_dev *dev);
> int mt76_wed_net_setup_tc(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
> struct net_device *netdev, enum tc_setup_type type,
> void *type_data);
> +
> +static inline int mt76_wcid_alloc(u32 *mask, int size)
> +{
> + return __mt76_wcid_alloc(mask, size, MT76_WED_DEFAULT);
> +}
> +
> #ifdef CONFIG_NET_MEDIATEK_SOC_WED
> u32 mt76_wed_init_rx_buf(struct mtk_wed_device *wed, int size);
> int mt76_wed_offload_enable(struct mtk_wed_device *wed);
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
> index 3aa31c5cefa6..fcbf4f971026 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
> @@ -744,9 +744,16 @@ int mt7915_mac_sta_add(struct mt76_dev *mdev, struct ieee80211_vif *vif,
> struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
> struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
> bool ext_phy = mvif->phy != &dev->phy;
> + u8 flags = MT76_WED_DEFAULT;
> int idx;
>
> - idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7915_WTBL_STA);
> + if (mtk_wed_device_active(&dev->mt76.mmio.wed) &&
> + !is_mt7915(&dev->mt76)) {
> + flags = test_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags) ?
> + MT76_WED_WDS_ACTIVE : MT76_WED_ACTIVE;
> + }
> +
> + idx = __mt76_wcid_alloc(mdev->wcid_mask, MT7915_WTBL_STA, flags);
> if (idx < 0)
> return -ENOSPC;
>
> @@ -1271,6 +1278,11 @@ static void mt7915_sta_set_4addr(struct ieee80211_hw *hw,
> {
> struct mt7915_dev *dev = mt7915_hw_dev(hw);
> struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
> + int min = MT76_WED_WDS_MIN, max = MT76_WED_WDS_MAX;
> + struct ieee80211_sta *pre_sta;
> + struct mt7915_sta *pre_msta;
> + u8 flags = MT76_WED_DEFAULT;
> + int tmp_idx;
>
> if (enabled)
> set_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags);
> @@ -1280,6 +1292,37 @@ static void mt7915_sta_set_4addr(struct ieee80211_hw *hw,
> if (!msta->wcid.sta)
> return;
>
> + if (mtk_wed_device_active(&dev->mt76.mmio.wed) &&
> + !is_mt7915(&dev->mt76) &&
> + (msta->wcid.idx < min || msta->wcid.idx > max - 1)) {
> + pre_sta = kmemdup(sta, sizeof(*sta) + sizeof(*msta), GFP_KERNEL | __GFP_ZERO);
> + if (!pre_sta)
> + goto error_alloc;
> + pre_msta = (struct mt7915_sta *)pre_sta->drv_priv;
> +
> + flags = test_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags) ?
> + MT76_WED_WDS_ACTIVE : MT76_WED_ACTIVE;
> +
> + tmp_idx = __mt76_wcid_alloc(dev->mt76.wcid_mask, MT7915_WTBL_STA, flags);
> + if (tmp_idx < 0)
> + goto error_wcid;
> + pre_msta->wcid.idx = (u16)tmp_idx;
> + mt7915_mac_sta_add(&dev->mt76, vif, pre_sta);
> + rcu_assign_pointer(dev->mt76.wcid[tmp_idx], &msta->wcid);
> +
> + tmp_idx = msta->wcid.idx;
> + msta->wcid.idx = pre_msta->wcid.idx;
> + pre_msta->wcid.idx = (u16)tmp_idx;
> + rcu_assign_pointer(dev->mt76.wcid[tmp_idx], NULL);
> +
> + synchronize_rcu();
> + mt7915_mac_sta_remove(&dev->mt76, vif, pre_sta);
> +
> +error_wcid:
> + kfree(pre_sta);
> + }
> +
> +error_alloc:
> mt76_connac_mcu_wtbl_update_hdr_trans(&dev->mt76, vif, sta);
> }
>
> @@ -1726,15 +1769,19 @@ mt7915_net_fill_forward_path(struct ieee80211_hw *hw,
> if (!mtk_wed_device_active(wed))
> return -ENODEV;
>
> - if (msta->wcid.idx > 0xff)
> + if (msta->wcid.idx > MT7915_WTBL_STA)
> return -EIO;
>
> path->type = DEV_PATH_MTK_WDMA;
> path->dev = ctx->dev;
> path->mtk_wdma.wdma_idx = wed->wdma_idx;
> path->mtk_wdma.bss = mvif->mt76.idx;
> - path->mtk_wdma.wcid = is_mt7915(&dev->mt76) ? msta->wcid.idx : 0x3ff;
> path->mtk_wdma.queue = phy != &dev->phy;
> + if (test_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags) ||
> + is_mt7915(&dev->mt76))
> + path->mtk_wdma.wcid = msta->wcid.idx;
> + else
> + path->mtk_wdma.wcid = 0x3ff;
>
> ctx->dev = NULL;
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> index 9d790f234e82..191f966c3f32 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> @@ -2385,10 +2385,20 @@ int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
>
> mt76_connac_mcu_del_wtbl_all(&dev->mt76);
>
> - if ((mtk_wed_device_active(&dev->mt76.mmio.wed) &&
> - is_mt7915(&dev->mt76)) ||
> - !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
> - mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY), 0, 0, 0);
> +#if IS_ENABLED(CONFIG_NET_MEDIATEK_SOC_WED)
> + if (mtk_wed_device_active(&dev->mt76.mmio.wed)) {
> + if (is_mt7915(&dev->mt76) ||
> + !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
> + ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY),
> + 0, 0, 0);
> + else
> + ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
> + MCU_WA_PARAM_WED_VERSION,
> + dev->mt76.mmio.wed.rev_id, 0);
> + if (ret)
> + return ret;
> + }
> +#endif
>
> ret = mt7915_mcu_set_mwds(dev, 1);
> if (ret)
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> index 49476a4182fd..c3dd0cb4a5d3 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> @@ -278,6 +278,7 @@ enum {
> MCU_WA_PARAM_PDMA_RX = 0x04,
> MCU_WA_PARAM_CPU_UTIL = 0x0b,
> MCU_WA_PARAM_RED = 0x0e,
> + MCU_WA_PARAM_WED_VERSION = 0x32,
> MCU_WA_PARAM_RED_SETTING = 0x40,
> };
>
> diff --git a/drivers/net/wireless/mediatek/mt76/util.c b/drivers/net/wireless/mediatek/mt76/util.c
> index 95b3dc96e4c4..e80bef2b33a1 100644
> --- a/drivers/net/wireless/mediatek/mt76/util.c
> +++ b/drivers/net/wireless/mediatek/mt76/util.c
> @@ -42,8 +42,10 @@ bool ____mt76_poll_msec(struct mt76_dev *dev, u32 offset, u32 mask, u32 val,
> }
> EXPORT_SYMBOL_GPL(____mt76_poll_msec);
>
> -int mt76_wcid_alloc(u32 *mask, int size)
> +int __mt76_wcid_alloc(u32 *mask, int size, u8 flag)
> {
> + int max = MT76_WED_WDS_MAX;
> + int min = MT76_WED_WDS_MIN;
> int i, idx = 0, cur;
>
> for (i = 0; i < DIV_ROUND_UP(size, 32); i++) {
> @@ -53,16 +55,45 @@ int mt76_wcid_alloc(u32 *mask, int size)
>
> idx--;
> cur = i * 32 + idx;
> - if (cur >= size)
> +
> + switch (flag) {
> + case MT76_WED_ACTIVE:
> + if (cur >= min && cur < max)
> + continue;
> +
> + if (cur >= size) {
> + u32 end = max - min - 1;
> +
> + i = min / 32;
> + idx = ffs(~mask[i] & GENMASK(end, 0));
> + if (!idx)
> + goto error;
> + idx--;
> + cur = min + idx;
> + }
> +
> break;
> + case MT76_WED_WDS_ACTIVE:
> + if (cur < min)
> + continue;
> + if (cur >= max)
> + goto error;
> +
> + break;
> + default:
> + if (cur >= size)
> + goto error;
> + break;
> + }
>
> mask[i] |= BIT(idx);
> return cur;
> }
>
> +error:
> return -1;
> }
> -EXPORT_SYMBOL_GPL(mt76_wcid_alloc);
> +EXPORT_SYMBOL_GPL(__mt76_wcid_alloc);
>
> int mt76_get_min_avg_rssi(struct mt76_dev *dev, u8 phy_idx)
> {
> diff --git a/drivers/net/wireless/mediatek/mt76/util.h b/drivers/net/wireless/mediatek/mt76/util.h
> index 260965dde94c..fe95a847182e 100644
> --- a/drivers/net/wireless/mediatek/mt76/util.h
> +++ b/drivers/net/wireless/mediatek/mt76/util.h
> @@ -27,7 +27,7 @@ enum {
> #define MT76_INCR(_var, _size) \
> (_var = (((_var) + 1) % (_size)))
>
> -int mt76_wcid_alloc(u32 *mask, int size);
> +int __mt76_wcid_alloc(u32 *mask, int size, u8 flags);
>
> static inline void
> mt76_wcid_mask_set(u32 *mask, int idx)
[-- Attachment #1.1.2: OpenPGP public key --]
[-- Type: application/pgp-keys, Size: 6977 bytes --]
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]
prev parent reply other threads:[~2025-03-22 16:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-11 5:29 Shengyu Qu
2025-03-11 8:30 ` Ping-Ke Shih
2025-03-22 16:34 ` Shengyu Qu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=TYCPR01MB84373C301DD3430A00E9779D98DA2@TYCPR01MB8437.jpnprd01.prod.outlook.com \
--to=wiagn233@outlook.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bo.jiao@mediatek.com \
--cc=christophe.jaillet@wanadoo.fr \
--cc=chui-hao.chiu@mediatek.com \
--cc=emmanuel.grumbach@intel.com \
--cc=greearb@candelatech.com \
--cc=gustavoars@kernel.org \
--cc=johannes@sipsolutions.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=michael-cy.lee@mediatek.com \
--cc=mingyen.hsieh@mediatek.com \
--cc=miriam.rachel.korenblit@intel.com \
--cc=nbd@nbd.name \
--cc=nicolas.cavallari@green-communications.fr \
--cc=pkshih@realtek.com \
--cc=quic_adisi@quicinc.com \
--cc=ryder.lee@mediatek.com \
--cc=sean.wang@mediatek.com \
--cc=shayne.chen@mediatek.com \
--cc=sujuan.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®