RE: [PATCH 1/2] watchdog: rzg2l_wdt: Issue a reset before we put the PM clocks

[Fabrizio Castro <fabrizio.castro.jz@renesas.com>]

Hi All,

It looks like this patch has been reviewed by both Guenter Roeck
and Geert Uytterhoeven, any chance that it can be taken for v6.3?

Thanks,
Fab

> 
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> On RZ/Five SoC it was observed that setting timeout (to say 1 sec)
> wouldn't
> reset the system.
> 
> The procedure described in the HW manual (Procedure for Activating
> Modules)
> for activating the target module states we need to start supply of the
> clock module before applying the reset signal. This patch makes sure we
> follow the same procedure to clear the registers of the WDT module, fixing
> the issues seen on RZ/Five SoC.
> 
> While at it re-used rzg2l_wdt_stop() in rzg2l_wdt_set_timeout() as it has
> the same function calls.
> 
> Fixes: 4055ee81009e ("watchdog: rzg2l_wdt: Add set_timeout callback")
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
>  drivers/watchdog/rzg2l_wdt.c | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/watchdog/rzg2l_wdt.c b/drivers/watchdog/rzg2l_wdt.c
> index 974a4194a8fd..ceca42db0837 100644
> --- a/drivers/watchdog/rzg2l_wdt.c
> +++ b/drivers/watchdog/rzg2l_wdt.c
> @@ -115,25 +115,23 @@ static int rzg2l_wdt_stop(struct watchdog_device
> *wdev)
>  {
>  	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> 
> -	pm_runtime_put(wdev->parent);
>  	reset_control_reset(priv->rstc);
> +	pm_runtime_put(wdev->parent);
> 
>  	return 0;
>  }
> 
>  static int rzg2l_wdt_set_timeout(struct watchdog_device *wdev, unsigned
> int timeout)
>  {
> -	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> -
>  	wdev->timeout = timeout;
> 
>  	/*
>  	 * If the watchdog is active, reset the module for updating the
> WDTSET
> -	 * register so that it is updated with new timeout values.
> +	 * register by calling rzg2l_wdt_stop() (which internally calls
> reset_control_reset()
> +	 * to reset the module) so that it is updated with new timeout
> values.
>  	 */
>  	if (watchdog_active(wdev)) {
> -		pm_runtime_put(wdev->parent);
> -		reset_control_reset(priv->rstc);
> +		rzg2l_wdt_stop(wdev);
>  		rzg2l_wdt_start(wdev);
>  	}
> 
> --
> 2.34.1