mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jammy Huang <jammy_huang@aspeedtech.com>
To: Thomas Zimmermann <tzimmermann@suse.de>,
	"jfalempe@redhat.com" <jfalempe@redhat.com>,
	"maarten.lankhorst@linux.intel.com"
	<maarten.lankhorst@linux.intel.com>,
	"mripard@kernel.org" <mripard@kernel.org>,
	"airlied@redhat.com" <airlied@redhat.com>,
	"airlied@gmail.com" <airlied@gmail.com>,
	"daniel@ffwll.ch" <daniel@ffwll.ch>
Cc: "dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH v3] drm/ast: Support timings, 1280x720/1280x960/1600x900
Date: Thu, 9 Jan 2025 01:06:49 +0000	[thread overview]
Message-ID: <TYZPR06MB6568491FBCEE290907D5AB3FF1132@TYZPR06MB6568.apcprd06.prod.outlook.com> (raw)
In-Reply-To: <c7180207-e1be-45e3-a2e6-584ffb59ea50@suse.de>

Hi Thomas,

Thanks for the feedback. Let me consider how to achieve your suggestion.

Regards,
Jammy Huang

> 
> Hi Jamie
> 
> 
> Am 25.12.24 um 01:32 schrieb Jammy Huang:
> > In this patch, 3 new timings are added into support list.
> >
> > If you want to have new timings, 1280x720 and 1280x960 on DisplayPort,
> > your dp-fw should be newer than version, 20240502.
> 
> Thank you for the patch.
> 
> What happens if the firmware is not at the required version?
> 
> As it seems unreasonable to expect everyone to upgrade their DP firmware (or
> even be able to), we 'll likely need a test against the firmware version. So that
> the additional display modes are optional within the driver. My proposal is to
> get the firmware version at the end of
> ast_dp_launch() [1]. Then implement drm_encoder_helper_funcs.mode_valid
> [2] to filter out unsupported modes on older firmwares. Does that make sense?
> 
> Best regards
> Thomas
> 
> [1]
> https://elixir.bootlin.com/linux/v6.13-rc3/source/drivers/gpu/drm/ast/ast_dp.c
> #L148
> [2]
> https://elixir.bootlin.com/linux/v6.13-rc3/source/include/drm/drm_modeset_h
> elper_vtables.h#L562
> 
> >
> > Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
> > ---
> > v2:
> >   - Fix build errors.
> > v3:
> >   - Fix typo.
> > ---
> >   drivers/gpu/drm/ast/ast_dp.c     |  9 ++++++++-
> >   drivers/gpu/drm/ast/ast_drv.h    |  3 +++
> >   drivers/gpu/drm/ast/ast_mode.c   | 14 ++++++++++++++
> >   drivers/gpu/drm/ast/ast_tables.h | 18 ++++++++++++++++++
> >   4 files changed, 43 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/ast/ast_dp.c b/drivers/gpu/drm/ast/ast_dp.c
> > index 0e282b7b167c..0b56f0335871 100644
> > --- a/drivers/gpu/drm/ast/ast_dp.c
> > +++ b/drivers/gpu/drm/ast/ast_dp.c
> > @@ -255,6 +255,10 @@ static void ast_dp_set_mode(struct drm_crtc *crtc,
> struct ast_vbios_mode_info *v
> >   	case 1280:
> >   		if (crtc->mode.crtc_vdisplay == 800)
> >   			ModeIdx = (ASTDP_1280x800_60_RB - (u8)
> ulRefreshRateIndex);
> > +		else if (crtc->mode.crtc_vdisplay == 720)
> > +			ModeIdx = ASTDP_1280x720_60;
> > +		else if (crtc->mode.crtc_vdisplay == 960)
> > +			ModeIdx = ASTDP_1280x960_60;
> >   		else		// 1024
> >   			ModeIdx = (ASTDP_1280x1024_60 + (u8)
> ulRefreshRateIndex);
> >   		break;
> > @@ -267,7 +271,10 @@ static void ast_dp_set_mode(struct drm_crtc *crtc,
> struct ast_vbios_mode_info *v
> >   		break;
> >   	case 1600:
> >   		if (crtc->mode.crtc_vdisplay == 900)
> > -			ModeIdx = (ASTDP_1600x900_60_RB - (u8)
> ulRefreshRateIndex);
> > +			if (ulRefreshRateIndex == 2)
> > +				ModeIdx = ASTDP_1600x900_60_DMT;
> > +			else
> > +				ModeIdx = (ASTDP_1600x900_60_RB - (u8)
> ulRefreshRateIndex);
> >   		else		//1200
> >   			ModeIdx = ASTDP_1600x1200_60;
> >   		break;
> > diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h
> > index 21ce3769bf0d..e7cef334b3ec 100644
> > --- a/drivers/gpu/drm/ast/ast_drv.h
> > +++ b/drivers/gpu/drm/ast/ast_drv.h
> > @@ -442,6 +442,9 @@ int ast_mode_config_init(struct ast_device *ast);
> >   #define ASTDP_1600x900_60_RB	0x1D
> >   #define ASTDP_1366x768_60		0x1E
> >   #define ASTDP_1152x864_75		0x1F
> > +#define ASTDP_1600x900_60_DMT		0x51
> > +#define ASTDP_1280x720_60		0x52
> > +#define ASTDP_1280x960_60		0x53
> >
> >   int ast_mm_init(struct ast_device *ast);
> >
> > diff --git a/drivers/gpu/drm/ast/ast_mode.c
> b/drivers/gpu/drm/ast/ast_mode.c
> > index 9d5321c81e68..48d1065846a2 100644
> > --- a/drivers/gpu/drm/ast/ast_mode.c
> > +++ b/drivers/gpu/drm/ast/ast_mode.c
> > @@ -147,6 +147,10 @@ static bool ast_get_vbios_mode_info(const struct
> drm_format_info *format,
> >   	case 1280:
> >   		if (mode->crtc_vdisplay == 800)
> >   			vbios_mode->enh_table =
> &res_1280x800[refresh_rate_index];
> > +		else if (mode->crtc_vdisplay == 720)
> > +			vbios_mode->enh_table = &res_1280x720[refresh_rate_index];
> > +		else if (mode->crtc_vdisplay == 960)
> > +			vbios_mode->enh_table = &res_1280x960[refresh_rate_index];
> >   		else
> >   			vbios_mode->enh_table =
> &res_1280x1024[refresh_rate_index];
> >   		break;
> > @@ -475,6 +479,12 @@ static void ast_set_dclk_reg(struct ast_device *ast,
> >   	ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xbb, 0x0f,
> >   			       (clk_info->param3 & 0xc0) |
> >   			       ((clk_info->param3 & 0x3) << 4));
> > +
> > +	/* Set SEQ; Half dclk for this timing */
> > +	if (vbios_mode->enh_table->flags & HalfDCLK)
> > +		ast_set_index_reg_mask(ast, AST_IO_VGASRI, 0x01, 0xff, 0x08);
> > +	else
> > +		ast_set_index_reg_mask(ast, AST_IO_VGASRI, 0x01, 0xf7, 0x00);
> >   }
> >
> >   static void ast_set_color_reg(struct ast_device *ast,
> > @@ -1027,8 +1037,12 @@ ast_crtc_helper_mode_valid(struct drm_crtc
> *crtc, const struct drm_display_mode
> >   	if (ast->support_wide_screen) {
> >   		if ((mode->hdisplay == 1680) && (mode->vdisplay == 1050))
> >   			return MODE_OK;
> > +		if ((mode->hdisplay == 1280) && (mode->vdisplay == 960))
> > +			return MODE_OK;
> >   		if ((mode->hdisplay == 1280) && (mode->vdisplay == 800))
> >   			return MODE_OK;
> > +		if ((mode->hdisplay == 1280) && (mode->vdisplay == 720))
> > +			return MODE_OK;
> >   		if ((mode->hdisplay == 1440) && (mode->vdisplay == 900))
> >   			return MODE_OK;
> >   		if ((mode->hdisplay == 1360) && (mode->vdisplay == 768))
> > diff --git a/drivers/gpu/drm/ast/ast_tables.h
> b/drivers/gpu/drm/ast/ast_tables.h
> > index 0378c9bc079b..329d6bac867b 100644
> > --- a/drivers/gpu/drm/ast/ast_tables.h
> > +++ b/drivers/gpu/drm/ast/ast_tables.h
> > @@ -254,6 +254,13 @@ static const struct ast_vbios_enhtable
> res_1024x768[] = {
> >   	 (SyncPP | Charx8Dot), 0xFF, 4, 0x31 },
> >   };
> >
> > +static const struct ast_vbios_enhtable res_1280x960[] = {
> > +	{1800, 1280, 96, 112, 1000, 960, 1, 3, VCLK108, /* 60Hz */
> > +	 (SyncPP | Charx8Dot), 60, 1, 0x3E },
> > +	{1800, 1280, 96, 112, 1000, 960, 1, 3, VCLK108, /* end */
> > +	 (SyncPP | Charx8Dot), 0xFF, 1, 0x3E },
> > +};
> > +
> >   static const struct ast_vbios_enhtable res_1280x1024[] = {
> >   	{1688, 1280, 48, 112, 1066, 1024, 1, 3, VCLK108,	/* 60Hz */
> >   	 (SyncPP | Charx8Dot), 60, 1, 0x32 },
> > @@ -280,6 +287,15 @@ static const struct ast_vbios_enhtable
> res_1152x864[] = {
> >   };
> >
> >   /* 16:9 */
> > +static const struct ast_vbios_enhtable res_1280x720[] = {
> > +	{1650, 1280, 110, 40, 750, 720, 5, 5, VCLK148_5,	/* 60Hz */
> > +	 (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode |
> NewModeInfo |
> > +	  HalfDCLK), 60, 1, 0x3D },
> > +	{1650, 1280, 110, 40, 750, 720, 5, 5, VCLK148_5,	/* end */
> > +	 (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode |
> NewModeInfo |
> > +	  HalfDCLK), 0xFF, 1, 0x3D },
> > +};
> > +
> >   static const struct ast_vbios_enhtable res_1360x768[] = {
> >   	{1792, 1360, 64, 112, 795, 768, 3, 6, VCLK85_5,		/* 60Hz */
> >   	 (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode |
> NewModeInfo), 60, 1, 0x39 },
> > @@ -294,6 +310,8 @@ static const struct ast_vbios_enhtable res_1600x900[]
> = {
> >   	  AST2500PreCatchCRT), 60, 1, 0x3A },
> >   	{2112, 1600, 88, 168, 934, 900, 3, 5, VCLK118_25,	/* 60Hz CVT
> */
> >   	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode |
> NewModeInfo), 60, 2, 0x3A },
> > +	{1800, 1600, 24, 80, 1000, 900, 1, 3, VCLK108,		/* 60Hz DMT */
> > +	 (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode |
> NewModeInfo), 60, 3, 0x3A },
> >   	{2112, 1600, 88, 168, 934, 900, 3, 5, VCLK118_25,	/* 60Hz CVT
> */
> >   	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode |
> NewModeInfo), 0xFF, 2, 0x3A },
> >   };
> >
> > base-commit: 4bbf9020becbfd8fc2c3da790855b7042fad455b
> 
> --
> --
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Frankenstrasse 146, 90461 Nuernberg, Germany
> GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
> HRB 36809 (AG Nuernberg)


      reply	other threads:[~2025-01-09  1:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-25  0:32 Jammy Huang
2025-01-06  8:42 ` Thomas Zimmermann
2025-01-09  1:06   ` Jammy Huang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=TYZPR06MB6568491FBCEE290907D5AB3FF1132@TYZPR06MB6568.apcprd06.prod.outlook.com \
    --to=jammy_huang@aspeedtech.com \
    --cc=airlied@gmail.com \
    --cc=airlied@redhat.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jfalempe@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®