From: Paul Cercueil <paul@crapouillou.net>
To: 周琰杰 <zhouyanjie@wanyeetech.com>
Cc: ulf.hansson@linaro.org, robh+dt@kernel.org,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
dongsheng.qiu@ingenic.com, aric.pzqi@ingenic.com,
rick.tyliu@ingenic.com, sihui.liu@ingenic.com,
jun.jiang@ingenic.com, sernia.zhou@foxmail.com,
zhenwenjin@gmail.com
Subject: Re: [PATCH v2 2/2] mmc: JZ4740: Add support for JZ4775.
Date: Thu, 10 Jun 2021 14:15:31 +0100 [thread overview]
Message-ID: <V5MHUQ.E8C6HNTG18GS3@crapouillou.net> (raw)
In-Reply-To: <1623329930-14387-3-git-send-email-zhouyanjie@wanyeetech.com>
Hi Zhou,
Le jeu., juin 10 2021 at 20:58:50 +0800, 周琰杰 (Zhou Yanjie)
<zhouyanjie@wanyeetech.com> a écrit :
> 1.Add support for probing mmc driver on the JZ4775 SoC from Ingenic.
> 2.The drive clock selection and sample clock selection have been
> supported since JZ4775, not X1000. So support for these two
> functions has been added for JZ4775 and JZ4780.
>
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Now that's a good-looking patch ;)
Thanks for working on it.
Cheers,
-Paul
> ---
>
> Notes:
> v1->v2:
> 1.Remove unnecessary renaming as Paul Cercueil's suggestion.
> 2.Reuse the ID of JZ4775 and JZ4780 to simplify the code.
> 3.Add support of drive clock selection and sample clock
> selection for JZ4775 and JZ4780.
>
> drivers/mmc/host/jz4740_mmc.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/jz4740_mmc.c
> b/drivers/mmc/host/jz4740_mmc.c
> index b3c636e..f3172e5 100644
> --- a/drivers/mmc/host/jz4740_mmc.c
> +++ b/drivers/mmc/host/jz4740_mmc.c
> @@ -674,7 +674,7 @@ static void jz4740_mmc_send_command(struct
> jz4740_mmc_host *host,
> cmdat |= JZ_MMC_CMDAT_WRITE;
> if (host->use_dma) {
> /*
> - * The 4780's MMC controller has integrated DMA ability
> + * The JZ4780's MMC controller has integrated DMA ability
> * in addition to being able to use the external DMA
> * controller. It moves DMA control bits to a separate
> * register. The DMA_SEL bit chooses the external
> @@ -866,7 +866,7 @@ static int jz4740_mmc_set_clock_rate(struct
> jz4740_mmc_host *host, int rate)
> writew(div, host->base + JZ_REG_MMC_CLKRT);
>
> if (real_rate > 25000000) {
> - if (host->version >= JZ_MMC_X1000) {
> + if (host->version >= JZ_MMC_JZ4780) {
> writel(JZ_MMC_LPM_DRV_RISING_QTR_PHASE_DLY |
> JZ_MMC_LPM_SMP_RISING_QTR_OR_HALF_PHASE_DLY |
> JZ_MMC_LPM_LOW_POWER_MODE_EN,
> @@ -959,6 +959,7 @@ static const struct of_device_id
> jz4740_mmc_of_match[] = {
> { .compatible = "ingenic,jz4740-mmc", .data = (void *)
> JZ_MMC_JZ4740 },
> { .compatible = "ingenic,jz4725b-mmc", .data = (void
> *)JZ_MMC_JZ4725B },
> { .compatible = "ingenic,jz4760-mmc", .data = (void *)
> JZ_MMC_JZ4760 },
> + { .compatible = "ingenic,jz4775-mmc", .data = (void *)
> JZ_MMC_JZ4780 },
> { .compatible = "ingenic,jz4780-mmc", .data = (void *)
> JZ_MMC_JZ4780 },
> { .compatible = "ingenic,x1000-mmc", .data = (void *) JZ_MMC_X1000
> },
> {},
> --
> 2.7.4
>
next prev parent reply other threads:[~2021-06-10 13:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-10 12:58 [PATCH v2 0/2] " 周琰杰 (Zhou Yanjie)
2021-06-10 12:58 ` [PATCH v2 1/2] dt-bindings: mmc: JZ4740: Add bindings " 周琰杰 (Zhou Yanjie)
2021-06-10 13:14 ` Paul Cercueil
2021-06-10 12:58 ` [PATCH v2 2/2] mmc: JZ4740: Add support " 周琰杰 (Zhou Yanjie)
2021-06-10 13:15 ` Paul Cercueil [this message]
2021-06-11 7:40 ` [PATCH v2 0/2] " Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=V5MHUQ.E8C6HNTG18GS3@crapouillou.net \
--to=paul@crapouillou.net \
--cc=aric.pzqi@ingenic.com \
--cc=devicetree@vger.kernel.org \
--cc=dongsheng.qiu@ingenic.com \
--cc=jun.jiang@ingenic.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=rick.tyliu@ingenic.com \
--cc=robh+dt@kernel.org \
--cc=sernia.zhou@foxmail.com \
--cc=sihui.liu@ingenic.com \
--cc=ulf.hansson@linaro.org \
--cc=zhenwenjin@gmail.com \
--cc=zhouyanjie@wanyeetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®