From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 8 Oct 2001 16:35:48 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 8 Oct 2001 16:35:39 -0400 Received: from maila.hrz.uni-siegen.de ([141.99.11.1]:59404 "EHLO maila.hrz.uni-siegen.de") by vger.kernel.org with ESMTP id ; Mon, 8 Oct 2001 16:35:24 -0400 Message-ID: X-Mailer: XFMail 1.4.7p2 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <20011008201040.A1893@geisel.info> Date: Mon, 08 Oct 2001 22:35:42 +0200 (CEST) From: Dominik Thinay To: Dominik Geisel , linux-kernel@vger.kernel.org Subject: RE: Problem with ACPI on Abit KT7,HPT370 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi with kernel 2.4.11-pre3-xfs + i2c CVS-patch + lmsensors it works fine on my system (Abit Bios KT7_49B0) CONFIG_PM=y CONFIG_ACPI=y CONFIG_ACPI_DEBUG=y CONFIG_ACPI_BUSMGR=y CONFIG_ACPI_SYS=y CONFIG_ACPI_CPU=y CONFIG_ACPI_BUTTON=y But i don't use ide cdrom's I remember disabled sth in the bios ...but i have forget ... :( regards dominik Ps: "IC35L040AVER07-0" works in UDMA(44) or :( I have disabled the entry in the blacklist of hpt366.c (dtla307030,dtla307060) for testing with the new mb bios > Hi, > > with all 2.4 kernels (latest I tried were 2.4.10 + 2.4.10-ac9), my Abit > KT7-RAID > with onboard HPT370 IDE RAID controller, BIOS version 4A, locks up when ACPI > is enabled in the kernel. APM works fine. I enable > > CONFIG_PM=Y > CONFIG_ACPI=Y > CONFIG_ACPI_BUSMGR=Y > CONFIG_ACPI_SYS=Y > CONFIG_ACPI_CPU=Y > > The following messages could be useful: > > this is the bootup messages when ACPI is disabled: > ------------------------------------------------------------------------ > Oct 8 19:50:31 pc1 kernel: HPT370: IDE controller on PCI bus 00 dev 98 > Oct 8 19:50:31 pc1 kernel: PCI: Found IRQ 11 for device 00:13.0 > Oct 8 19:50:31 pc1 kernel: HPT370: chipset revision 3 > Oct 8 19:50:31 pc1 kernel: HPT370: not 100%% native mode: will probe irqs > later > Oct 8 19:50:31 pc1 kernel: ide2: BM-DMA at 0xec00-0xec07, > BIOS settings: hde:DMA, hdf:pio > Oct 8 19:50:31 pc1 kernel: ide3: BM-DMA at 0xec08-0xec0f, BIOS settings: > hdg:pio, hdh:pio > Oct 8 19:50:31 pc1 kernel: hda: IBM-DTTA-351010, ATA DISK drive > Oct 8 19:50:31 pc1 kernel: hdc: SONY CD-RW CRX140E, ATAPI CD/DVD-ROM drive > Oct 8 19:50:31 pc1 kernel: hde: IC35L040AVER07-0, ATA DISK drive > ------------------------------------------------------------------------ > > When ACPI is enabled, it locks up after it detected "hdc: SONY CD-RW", > the HDD access LED stays on and the system hangs until I do a hard reboot. > > Contact me if you need further logs or reports. > Dominik Geisel > > -- > Women want mediocre men. And men are working hard to become as medicore > as possible. > GPG public key @ http://www.geisel.info/key.asc > B216 156D 04EE AE0C 4C03 80C2 CE4B DBB3 801B 3CC2 > - -- ---------------------------------- E-Mail: Dominik Thinay Date: 08-Oct-2001 ----------------------------------