Re: [PATCH v2] uio:uio_pci_generic:Don't clear master bit when the process does not exit

[Greg KH <gregkh@linuxfoundation.org>]

On Tue, Feb 21, 2023 at 01:10:44AM +0800, Su Weifeng wrote:
> From: Weifeng Su <suweifeng1@huawei.com>
> 
> The /dev/uioX device has concurrent operations in a few scenarios.
> 
> For example, when a process using the device exits abnormally,
> the management program starts the same process to operate the device.
> When the process exits and closes the /dev/uioX device,
> the master bit of the device is cleared. In this case, if the
> new process is issuing commands, I/Os are suspended and cannot be
> automatically recovered.
> 
> Therefore, reference counting is added to clear the master bit
> only when the last process exits.
> 
> Signed-off-by: Weifeng Su <suweifeng1@huawei.com>
> ---
> The difference between the first patch and the first patch is that 
> the reference counting operation is performed using the atomic semantics, 
> just like other drivers under UIO:
> cdfa835c6e5e87d145f("uio_hv_generic: defer opening vmbus until first use").

And I would claim that that change too is incorrect.

Did you test this with dup()?  Lots of open/close cycles on the same
device node?  Passing around the file descriptor?

Logically, this is identical to your previous change, so why should it
be accepted?

Again, why not just use a real PCI driver for your device?

thanks,

greg k-h