From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
gregkh@linuxfoundation.org, jirislaby@kernel.org,
ilpo.jarvinen@linux.intel.com, macro@orcam.me.uk,
jay.dolan@accesio.com, cang1@live.co.uk,
u.kleine-koenig@pengutronix.de, wander@redhat.com,
etremblay@distech-controls.com, jk@ozlabs.org,
biju.das.jz@bp.renesas.com, geert+renesas@glider.be,
phil.edworthy@renesas.com, lukas@wunner.de,
UNGLinuxDriver@microchip.com
Subject: Re: [PATCH v4 tty-next 2/3] 8250: microchip: pci1xxxx: Add rs485 support to quad-uart driver
Date: Fri, 11 Nov 2022 18:42:07 +0200 [thread overview]
Message-ID: <Y257X+pkCRtzg7I4@smile.fi.intel.com> (raw)
In-Reply-To: <20221111161130.2043882-3-kumaravel.thiagarajan@microchip.com>
On Fri, Nov 11, 2022 at 09:41:29PM +0530, Kumaravel Thiagarajan wrote:
> pci1xxxx uart supports rs485 mode of operation in the hardware with
UART
RS485 (same in the subject)
> auto-direction control with configurable delay for releasing RTS after
> the transmission. This patch adds support for the rs485 mode.
RS485
...
> Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
> Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
No Co-developed-by?
...
> +static int pci1xxxx_rs485_config(struct uart_port *port,
> + struct ktermios *termios,
> + struct serial_rs485 *rs485)
> +{
> + u32 clock_div = readl(port->membase + UART_BAUD_CLK_DIVISOR_REG);
> + u8 delay_in_baud_periods = 0;
> + u32 baud_period_in_ns = 0;
Why these assignments?
> + u32 data = 0;
> +
> + /* pci1xxxx's uart hardware supports only RTS delay after
> + * Tx and in units of bit times to a maximum of 15
> + */
/*
* Use proper multi-line
* comment style.
*/
> + if (rs485->flags & SER_RS485_ENABLED) {
> + data = ADCL_CFG_EN | ADCL_CFG_PIN_SEL;
> +
> + if (!(rs485->flags & SER_RS485_RTS_ON_SEND))
> + data |= ADCL_CFG_POL_SEL;
> +
> + if (rs485->delay_rts_after_send) {
> + baud_period_in_ns =
> + FIELD_GET(BAUD_CLOCK_DIV_INT_MSK, clock_div) *
> + UART_BIT_SAMPLE_CNT;
> + delay_in_baud_periods =
> + (rs485->delay_rts_after_send * NSEC_PER_MSEC) /
> + baud_period_in_ns;
> + delay_in_baud_periods =
> + min_t(u8, delay_in_baud_periods,
> + FIELD_MAX(ADCL_CFG_RTS_DELAY_MASK));
> + data |= FIELD_PREP(ADCL_CFG_RTS_DELAY_MASK,
> + delay_in_baud_periods);
> + rs485->delay_rts_after_send =
> + (baud_period_in_ns * delay_in_baud_periods) /
> + NSEC_PER_MSEC;
> + rs485->delay_rts_before_send = 0;
> + }
> + }
> + writel(data, port->membase + ADCL_CFG_REG);
> + return 0;
> +}
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2022-11-11 16:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-11 16:11 [PATCH v4 tty-next 0/3] 8250: microchip: pci1xxxx: Add driver for the pci1xxxx's quad-uart function Kumaravel Thiagarajan
2022-11-11 16:11 ` [PATCH v4 tty-next 1/3] 8250: microchip: pci1xxxx: Add driver for quad-uart support Kumaravel Thiagarajan
2022-11-11 16:39 ` Andy Shevchenko
2022-11-15 7:20 ` Tharunkumar.Pasumarthi
2022-11-15 8:46 ` Andy Shevchenko
2022-11-11 16:11 ` [PATCH v4 tty-next 2/3] 8250: microchip: pci1xxxx: Add rs485 support to quad-uart driver Kumaravel Thiagarajan
2022-11-11 16:42 ` Andy Shevchenko [this message]
2022-11-11 16:11 ` [PATCH v4 tty-next 3/3] 8250: microchip: pci1xxxx: Add power management functions " Kumaravel Thiagarajan
2022-11-11 16:45 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y257X+pkCRtzg7I4@smile.fi.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=cang1@live.co.uk \
--cc=etremblay@distech-controls.com \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jay.dolan@accesio.com \
--cc=jirislaby@kernel.org \
--cc=jk@ozlabs.org \
--cc=kumaravel.thiagarajan@microchip.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=macro@orcam.me.uk \
--cc=phil.edworthy@renesas.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wander@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®