From: Jaegeuk Kim <jaegeuk@kernel.org>
To: Chao Yu <yuchao0@huawei.com>
Cc: Huang Jianan <huangjianan@oppo.com>,
linux-f2fs-devel@lists.sourceforge.net, zhangshiming@oppo.com,
linux-kernel@vger.kernel.org
Subject: Re: [f2fs-dev] [PATCH 3/3] f2fs: check if swapfile is section-alligned
Date: Mon, 1 Mar 2021 20:20:10 -0800 [thread overview]
Message-ID: <YD28+iVg4sjS3+22@google.com> (raw)
In-Reply-To: <b4ae58b2-3325-6cdf-26b4-b77810d33bbc@huawei.com>
On 03/01, Chao Yu wrote:
> Hi Jianan,
Merged 1/3 and 2/3, so please post v2 on 3/3.
Thanks,
>
> On 2021/2/27 20:02, Huang Jianan via Linux-f2fs-devel wrote:
> > If the swapfile isn't created by pin and fallocate, it cann't be
>
> Typo:
>
> can't
>
> > guaranteed section-aligned, so it may be selected by f2fs gc. When
> > gc_pin_file_threshold is reached, the address of swapfile may change,
> > but won't be synchroniz to swap_extent, so swap will write to wrong
>
> synchronized
>
> > address, which will cause data corruption.
> >
> > Signed-off-by: Huang Jianan <huangjianan@oppo.com>
> > Signed-off-by: Guo Weichao <guoweichao@oppo.com>
> > ---
> > fs/f2fs/data.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 63 insertions(+)
> >
> > diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
> > index 4dbc1cafc55d..3e523d6e4643 100644
> > --- a/fs/f2fs/data.c
> > +++ b/fs/f2fs/data.c
> > @@ -3781,11 +3781,63 @@ int f2fs_migrate_page(struct address_space *mapping,
> > #endif
> > #ifdef CONFIG_SWAP
> > +static int f2fs_check_file_aligned(struct inode *inode)
>
> f2fs_check_file_alignment() or f2fs_is_file_aligned()?
>
> > +{
> > + struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
> > + block_t main_blkaddr = SM_I(sbi)->main_blkaddr;
> > + block_t cur_lblock;
> > + block_t last_lblock;
> > + block_t pblock;
> > + unsigned long len;
> > + unsigned long nr_pblocks;
> > + unsigned int blocks_per_sec = sbi->blocks_per_seg * sbi->segs_per_sec;
>
> unsigned int blocks_per_sec = BLKS_PER_SEC(sbi);
>
> > + int ret;
> > +
> > + cur_lblock = 0;
> > + last_lblock = bytes_to_blks(inode, i_size_read(inode));
> > + len = i_size_read(inode);
> > +
> > + while (cur_lblock < last_lblock) {
> > + struct f2fs_map_blocks map;
> > + pgoff_t next_pgofs;
> > +
> > + memset(&map, 0, sizeof(map));
> > + map.m_lblk = cur_lblock;
> > + map.m_len = bytes_to_blks(inode, len) - cur_lblock;
>
> map.m_len = last_lblock - cur_lblock;
>
> > + map.m_next_pgofs = &next_pgofs;
>
> map.m_next_pgofs = NULL;
> map.m_next_extent = NULL;
>
> > + map.m_seg_type = NO_CHECK_TYPE;
>
> map.m_may_create = false;
>
> > +
> > + ret = f2fs_map_blocks(inode, &map, 0, F2FS_GET_BLOCK_FIEMAP);
> > +
>
> Unneeded blank line.
>
> > + if (ret)
> > + goto err_out;
> > +
> > + /* hole */
> > + if (!(map.m_flags & F2FS_MAP_FLAGS))
>
> ret = -ENOENT;
>
> > + goto err_out;
> > +
> > + pblock = map.m_pblk;
> > + nr_pblocks = map.m_len;
> > +
> > + if ((pblock - main_blkaddr) & (blocks_per_sec - 1) ||
> > + nr_pblocks & (blocks_per_sec - 1))
>
> ret = -EINVAL;
>
> > + goto err_out;
> > +
> > + cur_lblock += nr_pblocks;
> > + }
> > +
> > + return 0;
> > +err_out:
> > + pr_err("swapon: swapfile isn't section-aligned\n");
>
> We should show above message only after we fail in check condition:
>
> if ((pblock - main_blkaddr) & (blocks_per_sec - 1) ||
> nr_pblocks & (blocks_per_sec - 1)) {
> f2fs_err(sbi, "Swapfile does not align to section");
> goto err_out;
> }
>
> And please use f2fs_{err,warn,info..} macro rather than pr_{err,warn,info..}.
>
> Could you please fix above related issues in check_swap_activate_fast() as well.
>
> > + return -EINVAL;
>
> return ret;
>
> > +}
> > +
> > static int check_swap_activate_fast(struct swap_info_struct *sis,
> > struct file *swap_file, sector_t *span)
> > {
> > struct address_space *mapping = swap_file->f_mapping;
> > struct inode *inode = mapping->host;
> > + struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
> > sector_t cur_lblock;
> > sector_t last_lblock;
> > sector_t pblock;
> > @@ -3793,6 +3845,7 @@ static int check_swap_activate_fast(struct swap_info_struct *sis,
> > sector_t highest_pblock = 0;
> > int nr_extents = 0;
> > unsigned long nr_pblocks;
> > + unsigned int blocks_per_sec = sbi->blocks_per_seg * sbi->segs_per_sec;
>
> Ditto,
>
> > u64 len;
> > int ret;
> > @@ -3827,6 +3880,13 @@ static int check_swap_activate_fast(struct swap_info_struct *sis,
> > pblock = map.m_pblk;
> > nr_pblocks = map.m_len;
> > + if ((pblock - SM_I(sbi)->main_blkaddr) & (blocks_per_sec - 1) ||
> > + nr_pblocks & (blocks_per_sec - 1)) {
> > + pr_err("swapon: swapfile isn't section-aligned\n");
>
> Ditto,
>
> > + ret = -EINVAL;
> > + goto out;
> > + }
> > +
> > if (cur_lblock + nr_pblocks >= sis->max)
> > nr_pblocks = sis->max - cur_lblock;
> > @@ -3878,6 +3938,9 @@ static int check_swap_activate(struct swap_info_struct *sis,
> > if (PAGE_SIZE == F2FS_BLKSIZE)
> > return check_swap_activate_fast(sis, swap_file, span);
> > + if (f2fs_check_file_aligned(inode))
>
> ret = f2fs_check_file_aligned();
> if (ret)
> return ret;
>
> Thanks,
>
> > + return -EINVAL;
> > +
> > blocks_per_page = bytes_to_blks(inode, PAGE_SIZE);
> > /*
> >
>
>
> _______________________________________________
> Linux-f2fs-devel mailing list
> Linux-f2fs-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
next prev parent reply other threads:[~2021-03-02 8:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-27 12:02 [PATCH 1/3] f2fs: remove unnecessary IS_SWAPFILE check Huang Jianan
2021-02-27 12:02 ` [PATCH 2/3] f2fs: fix last_lblock check in check_swap_activate_fast Huang Jianan
2021-03-01 2:01 ` [f2fs-dev] " Chao Yu
2021-02-27 12:02 ` [PATCH 3/3] f2fs: check if swapfile is section-alligned Huang Jianan
2021-03-01 2:41 ` [f2fs-dev] " Chao Yu
2021-03-02 4:20 ` Jaegeuk Kim [this message]
2021-03-02 4:25 ` Jaegeuk Kim
2021-03-01 1:58 ` [f2fs-dev] [PATCH 1/3] f2fs: remove unnecessary IS_SWAPFILE check Chao Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YD28+iVg4sjS3+22@google.com \
--to=jaegeuk@kernel.org \
--cc=huangjianan@oppo.com \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=yuchao0@huawei.com \
--cc=zhangshiming@oppo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®