From: Vinod Koul <vkoul@kernel.org>
To: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: robdclark@gmail.com, sean@poorly.run, swboyd@chromium.org,
agross@kernel.org, bjorn.andersson@linaro.org,
tanmay@codeaurora.org, abhinavk@codeaurora.org,
aravindh@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] phy/qualcomm: add hbr3_hbr2 voltage and premphasis swing table
Date: Mon, 15 Mar 2021 15:41:20 +0530 [thread overview]
Message-ID: <YE8yyK7l9qQKuF3V@vkoul-mobl> (raw)
In-Reply-To: <1613667070-27613-1-git-send-email-khsieh@codeaurora.org>
On 18-02-21, 08:51, Kuogee Hsieh wrote:
> Add hbr3_hbr2 voltage and premphasis swing table to support
> HBR3 link rate.
Please use phy: qcom-qmp: "...." for the patch title
>
> Changes in V2:
> -- replaced upper case with lower case at hbr3_hbr2 table
>
> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp.c | 23 +++++++++++++++++++++--
> 1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 0939a9e..4dcc074 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -2965,6 +2965,20 @@ static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy)
> qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> }
>
> +static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
> + { 0x00, 0x0c, 0x15, 0x1a },
> + { 0x02, 0x0e, 0x16, 0xff },
> + { 0x02, 0x11, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
This should use tabs and not spaces, please fix this and resend the
patch after running checkpatch --strict and adding Steve's acks
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
> + { 0x02, 0x12, 0x16, 0x1a },
> + { 0x09, 0x19, 0x1f, 0xff },
> + { 0x10, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> { 0x00, 0x0c, 0x14, 0x19 },
> { 0x00, 0x0b, 0x12, 0xff },
> @@ -3000,8 +3014,13 @@ static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy)
> drvr_en = 0x10;
> }
>
> - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> + if (dp_opts->link_rate <= 2700) {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> + } else {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
> + }
>
> /* TODO: Move check to config check */
> if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
--
~Vinod
prev parent reply other threads:[~2021-03-15 10:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-18 16:51 Kuogee Hsieh
2021-02-18 18:46 ` Stephen Boyd
2021-02-24 19:39 ` Stephen Boyd
2021-02-24 22:42 ` khsieh
2021-02-18 18:47 ` Stephen Boyd
2021-03-15 10:11 ` Vinod Koul [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YE8yyK7l9qQKuF3V@vkoul-mobl \
--to=vkoul@kernel.org \
--cc=abhinavk@codeaurora.org \
--cc=agross@kernel.org \
--cc=aravindh@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=khsieh@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
--cc=swboyd@chromium.org \
--cc=tanmay@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®