From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Badhri Jagan Sridharan <badhri@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Kyle Tso <kyletso@google.com>
Subject: Re: [PATCH v2 1/6] usb: typec: tcpm: Address incorrect values of tcpm psy for fixed supply
Date: Thu, 8 Apr 2021 09:51:25 +0300 [thread overview]
Message-ID: <YG6n7c2XpypLseWw@kuha.fi.intel.com> (raw)
In-Reply-To: <20210407200723.1914388-1-badhri@google.com>
On Wed, Apr 07, 2021 at 01:07:18PM -0700, Badhri Jagan Sridharan wrote:
> tcpm_pd_build_request overwrites current_limit and supply_voltage
> even before port partner accepts the requests. This leaves stale
> values in current_limit and supply_voltage that get exported by
> "tcpm-source-psy-". Solving this problem by caching the request
> values of current limit/supply voltage in req_current_limit
> and req_supply_voltage. current_limit/supply_voltage gets updated
> once the port partner accepts the request.
>
> Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply")
> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> Changes since V1:
> * Fixed typo as suggested by Guenter Roeck.
> * Added Reviewed-by tags.
> ---
> drivers/usb/typec/tcpm/tcpm.c | 17 ++++++++++-------
> 1 file changed, 10 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index ca1fc77697fc..4ea4b30ae885 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -389,7 +389,10 @@ struct tcpm_port {
> unsigned int operating_snk_mw;
> bool update_sink_caps;
>
> - /* Requested current / voltage */
> + /* Requested current / voltage to the port partner */
> + u32 req_current_limit;
> + u32 req_supply_voltage;
> + /* Actual current / voltage limit of the local port */
> u32 current_limit;
> u32 supply_voltage;
>
> @@ -2435,8 +2438,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
> case SNK_TRANSITION_SINK:
> if (port->vbus_present) {
> tcpm_set_current_limit(port,
> - port->current_limit,
> - port->supply_voltage);
> + port->req_current_limit,
> + port->req_supply_voltage);
> port->explicit_contract = true;
> tcpm_set_auto_vbus_discharge_threshold(port,
> TYPEC_PWR_MODE_PD,
> @@ -2545,8 +2548,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
> break;
> case SNK_NEGOTIATE_PPS_CAPABILITIES:
> port->pps_data.active = true;
> - port->supply_voltage = port->pps_data.out_volt;
> - port->current_limit = port->pps_data.op_curr;
> + port->req_supply_voltage = port->pps_data.out_volt;
> + port->req_current_limit = port->pps_data.op_curr;
> tcpm_set_state(port, SNK_TRANSITION_SINK, 0);
> break;
> case SOFT_RESET_SEND:
> @@ -3195,8 +3198,8 @@ static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo)
> flags & RDO_CAP_MISMATCH ? " [mismatch]" : "");
> }
>
> - port->current_limit = ma;
> - port->supply_voltage = mv;
> + port->req_current_limit = ma;
> + port->req_supply_voltage = mv;
>
> return 0;
> }
> --
> 2.31.1.295.g9ea45b61b8-goog
--
heikki
prev parent reply other threads:[~2021-04-08 6:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-07 20:07 Badhri Jagan Sridharan
2021-04-07 20:07 ` [PATCH v2 2/6] usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply Badhri Jagan Sridharan
2021-04-08 6:59 ` Heikki Krogerus
2021-04-10 2:10 ` Guenter Roeck
2021-04-07 20:07 ` [PATCH v2 3/6] usb: typec: tcpm: update power supply once partner accepts Badhri Jagan Sridharan
2021-04-08 7:09 ` Heikki Krogerus
2021-04-10 2:10 ` Guenter Roeck
2021-04-07 20:07 ` [PATCH v2 4/6] usb: typec: tcpm: Honour pSnkStdby requirement during negotiation Badhri Jagan Sridharan
2021-04-08 7:47 ` Heikki Krogerus
2021-04-14 0:58 ` Badhri Jagan Sridharan
2021-04-10 2:11 ` Guenter Roeck
2021-04-07 20:07 ` [PATCH v2 5/6] usb: typec: tcpm: Allow slow charging loops to comply to pSnkStby Badhri Jagan Sridharan
2021-04-08 8:14 ` Heikki Krogerus
2021-04-08 8:22 ` Heikki Krogerus
2021-04-14 0:59 ` Badhri Jagan Sridharan
2021-04-07 20:07 ` [PATCH v2 6/6] Documentation: connector: Add slow-charger-loop definition Badhri Jagan Sridharan
2021-04-09 18:38 ` Rob Herring
2021-04-14 1:27 ` Badhri Jagan Sridharan
2021-04-08 6:51 ` Heikki Krogerus [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YG6n7c2XpypLseWw@kuha.fi.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=Adam.Thomson.Opensource@diasemi.com \
--cc=badhri@google.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kyletso@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome