From: Petr Mladek <pmladek@suse.com>
To: John Ogness <john.ogness@linutronix.de>
Cc: Alexander Monakov <amonakov@ispras.ru>,
Paul Menzel <pmenzel@molgen.mpg.de>,
Joerg Roedel <jroedel@suse.de>,
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Sergey Senozhatsky <senozhatsky@chromium.org>,
Steven Rostedt <rostedt@goodmis.org>,
Joe Perches <joe@perches.com>
Subject: Re: [PATCH] iommu/amd: Fix extended features logging
Date: Mon, 12 Apr 2021 12:49:19 +0200 [thread overview]
Message-ID: <YHQlr5XTvlqxXnvX@alley> (raw)
In-Reply-To: <87o8ekioo4.fsf@jogness.linutronix.de>
On Sun 2021-04-11 21:52:59, John Ogness wrote:
> On 2021-04-11, Alexander Monakov <amonakov@ispras.ru> wrote:
> >>> The second line is emitted via 'pr_cont', which causes it to have a
> >>> different ('warn') loglevel compared to the previous line ('info').
> >>>
> >>> Commit 9a295ff0ffc9 attempted to rectify this by removing the newline
> >>> from the pci_info format string, but this doesn't work, as pci_info
> >>> calls implicitly append a newline anyway.
> >>
> >> Hmm, did I really screw that up during my testing? I am sorry about that.
> >>
> >> I tried to wrap my head around, where the newline is implicitly appended, and
> >> only found the definitions below.
> >>
> > Yeah, it's not obvious: it happens in kernel/printk/printk.c:vprintk_store
> > where it does
> >
> > if (dev_info)
> > lflags |= LOG_NEWLINE;
> >
> > It doesn't seem to be documented; I think it prevents using pr_cont with
> > "rich" printk facilities that go via _dev_info.
> >
> > I suspect it quietly changed in commit c313af145b9bc ("printk() - isolate
> > KERN_CONT users from ordinary complete lines").
>
> Yes, this behavior has been around for a while. I see no reason why it
> should be that way. These days printk does not care if there is dev_info
> included or not.
It seems that it has been this way since the dev_info was
introduced. It was called "dict" at that time. See
if (buflen && (!cont || dict)) {
/* no continuation; flush existing buffer */
log_store(facility, buflevel, NULL, 0, buf, buflen);
in the commit 7ff9554bb578ba02166071d2d ("printk: convert byte-buffer
to variable-length record buffer").
I am not sure why. Well, dev_printk() previously printed the extra
information for every piece. See, the commit c4e00daaa96d3a0786f
("driver-core: extend dev_printk() to pass structured data").
> > Yeah, I saw that, but decided to go with the 'pr_info("")' solution, because
> > it is less magic, and already used in two other drivers.
>
> Note that what I was suggesting was to fix a different issue: If the
> pr_cont() caller is interrupted by another printk user, then the
> following pr_cont() calls will use the default loglevel. By explicitly
> specifying the loglevel in pr_cont(), you can be sure that those pieces
> get the desired loglevel, even if those pieces get separated off because
> of an interrupting printk user.
>
> So even if we fix dev_info to allow pr_cont continuation, it still may
> be desirable to specify the loglevel in the pr_cont pieces.
>
> > pr_info("") will also prepend 'AMD-Vi:' to the feature list, which is
> > nice.
>
> I'd rather fix dev_info callers to allow pr_cont and then fix any code
> that is using this workaround.
>
> And if the print maintainers agree it is OK to encourage
> pr_cont(LOGLEVEL "...") usage, then people should really start using
> that if the loglevel on those pieces is important.
To be sure. We would need to repeat also the dev_info() information
in the continuous piece.
By other words. The clean solution would be:
+ remove the automatic newline in
kernel/printk/printk.c:vprintk_store
+ create wrappers, for example, dev_cont_info()
Best Regards,
Petr
next prev parent reply other threads:[~2021-04-12 10:49 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-10 21:11 Alexander Monakov
2021-04-11 6:17 ` Paul Menzel
2021-04-11 11:22 ` Alexander Monakov
2021-04-11 19:52 ` John Ogness
2021-04-11 20:43 ` Alexander Monakov
2021-04-11 21:08 ` Joe Perches
2021-04-12 10:59 ` Petr Mladek
2021-04-12 10:49 ` Petr Mladek [this message]
2021-04-11 11:31 ` Joe Perches
2021-04-11 11:42 ` Alexander Monakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YHQlr5XTvlqxXnvX@alley \
--to=pmladek@suse.com \
--cc=amonakov@ispras.ru \
--cc=iommu@lists.linux-foundation.org \
--cc=joe@perches.com \
--cc=john.ogness@linutronix.de \
--cc=jroedel@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=pmenzel@molgen.mpg.de \
--cc=rostedt@goodmis.org \
--cc=senozhatsky@chromium.org \
--cc=suravee.suthikulpanit@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®