Re: [PATCH v10] USB: serial: cp210x: Add support for GPIOs on CP2108

[Johan Hovold <johan@kernel.org>]

On Fri, Apr 23, 2021 at 07:16:45PM +0700, tu pham wrote:
> From: Pho Tran <pho.tran@silabs.com>
> 
> Similar to other CP210x devices, GPIO interfaces (gpiochip) should be
> supported for CP2108.
> 
> CP2108 has 4 serial interfaces but only 1 set of GPIO pins are shared
> to all of those interfaces. So, just need to initialize GPIOs of CP2108
> with only one interface (I use interface 0). It means just only 1 gpiochip
> device file will be created for CP2108.
> 
> CP2108 has 16 GPIOs, So data types of several variables need to be is u16
> instead of u8(in struct cp210x_serial_private). This doesn't affect other
> CP210x devices.
> 
> Because CP2108 has 16 GPIO pins, the parameter passed by cp210x functions
> will be different from other CP210x devices. So need to check part number
> of the device to use correct data format  before sending commands to
> devices.
> 
> Like CP2104, CP2108 have GPIO pins with configurable options. Therefore,
> should be mask all pins which are not in GPIO mode in cp2108_gpio_init()
> function.
> 
> Signed-off-by: Pho Tran <pho.tran@silabs.com>

When you forward a patch from someone else you need to sign-off on it as
well. If you also worked on the patch you can use the Co-Developed-by
tag as well. More info here:

	Documentation/process/submitting-patches.rst

Johan