Re: [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Stefan,

Thank you for the patch.

On Mon, Jun 21, 2021 at 08:22:10AM +0000, Stefan Riedmüller wrote:
> Hi,
> 
> another gentle ping.

Sorry for the delay, I have way too little bandwidth these days :-S

> Also adding Laurent Pinchart to CC.
>
> On Wed, 2021-05-26 at 07:34 +0000, Stefan Riedmüller wrote:
> > On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote:
> > > The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG.
> > > Add the corresponding connector type and 8 bpc as default bus_format.
> > > 
> > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

It will be interesting to add support for the 6bpp mode at some point (I
assume through a custom DT property that reports the state of the
panel's SEL68 pin, as it should be strapped in most cases).

> > > ---
> > >  drivers/gpu/drm/panel/panel-simple.c | 2 ++
> > >  1 file changed, 2 insertions(+)
> > > 
> > > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > > b/drivers/gpu/drm/panel/panel-simple.c
> > > index 4e2dad314c79..44583d0ed902 100644
> > > --- a/drivers/gpu/drm/panel/panel-simple.c
> > > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > > @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = {
> > >  		.width = 211,
> > >  		.height = 158,
> > >  	},
> > > +	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
> > > +	.connector_type = DRM_MODE_CONNECTOR_LVDS,
> > >  };
> > >  
> > >  static const struct drm_display_mode auo_g121ean01_mode = {

-- 
Regards,

Laurent Pinchart