Consistently use the defines for buck control mask values. Signed-off-by: Matti Vaittinen --- drivers/regulator/bd71815-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/bd71815-regulator.c b/drivers/regulator/bd71815-regulator.c index 16edd9062ca9..acaa6607898e 100644 --- a/drivers/regulator/bd71815-regulator.c +++ b/drivers/regulator/bd71815-regulator.c @@ -461,9 +461,9 @@ static const struct regulator_ops bd7181x_led_regulator_ops = { .min_uV = (min), \ .uV_step = (step), \ .vsel_reg = (vsel), \ - .vsel_mask = 0x3f, \ + .vsel_mask = BD71815_VOLT_MASK, \ .enable_reg = (ereg), \ - .enable_mask = 0x04, \ + .enable_mask = BD71815_BUCK_RUN_ON, \ .ramp_reg = (ereg), \ .ramp_mask = BD71815_BUCK_RAMPRATE_MASK, \ .ramp_delay_table = bd7181x_ramp_table, \ base-commit: 9e1ff307c779ce1f0f810c7ecce3d95bbae40896 -- 2.31.1 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =]