From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org,
Geert Uytterhoeven <geert@glider.be>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 4/4] arm64: dts: renesas: r8a779a0: Provide default DSI data-lanes
Date: Fri, 26 Nov 2021 15:08:27 +0200 [thread overview]
Message-ID: <YaDcS8BQd9rrMLHh@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20211126095445.932930-5-kieran.bingham+renesas@ideasonboard.com>
Hi Kieran,
Thank you for the patch.
On Fri, Nov 26, 2021 at 09:54:45AM +0000, Kieran Bingham wrote:
> The data-lanes is a mandatory property for the endpoints.
> Provide a default when not connected that represents the maximum
> lanes supported by the device.
>
> A connected device should override the data-lanes if it uses a lower
> number of lanes.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> ---
>
> This patch is split from 2/4 to keep it's change for distinct review.
> The data-lanes is marked as a mandatory property in the DSI bindings
> (which are out of tree, most recent posting at [0])
>
> [0] https://lore.kernel.org/all/YQGFP%2FcFoSksPyn+@pendragon.ideasonboard.com/
>
> The data-lanes property is marked as mandatory, which means it needs to
> be provided even when supplying the port templates which get overridden
> later. Is this expected behaviour?
>
> Does this have sufficient meaning? Or will it always have to be
> specified by any node overriding anyway...?
Isn't the remote-endpoint also mandatory ?
Given that there's no real good default value for data-lanes that is
significantly more likely than others, I'd prefer dropping the endpoints
from r8a779a0.dtsi and adding them in board files.
> arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> index fdad8bc4a069..7322c4628e2b 100644
> --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> @@ -2661,6 +2661,7 @@ dsi0_in: endpoint {
> port@1 {
> reg = <1>;
> dsi0_out: endpoint {
> + data-lanes = <1 2 3 4>;
> };
> };
> };
> @@ -2691,7 +2692,9 @@ dsi1_in: endpoint {
>
> port@1 {
> reg = <1>;
> +
> dsi1_out: endpoint {
> + data-lanes = <1 2 3 4>;
> };
> };
> };
--
Regards,
Laurent Pinchart
prev parent reply other threads:[~2021-11-26 13:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20211126095445.932930-1-kieran.bingham+renesas@ideasonboard.com>
2021-11-26 9:54 ` [PATCH v4 1/4] arm64: dts: renesas: r8a779a0: Add DU support Kieran Bingham
2021-11-26 12:51 ` Geert Uytterhoeven
2021-11-26 9:54 ` [PATCH v4 2/4] arm64: dts: renesas: r8a779a0: Add DSI encoders Kieran Bingham
2021-11-26 9:54 ` [PATCH v4 3/4] arm64: dts: renesas: r8a779a0: falcon-cpu: Add DSI display output Kieran Bingham
2021-11-26 9:54 ` [PATCH v4 4/4] arm64: dts: renesas: r8a779a0: Provide default DSI data-lanes Kieran Bingham
2021-11-26 13:08 ` Laurent Pinchart [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YaDcS8BQd9rrMLHh@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=geert@glider.be \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®