> Instead of returning an error if the watermark value is too high, which
> the core will silently ignore anyway, limit the value to the hardware
> FIFO size; a lower-than-requested value is still better than using the
> default, which is usually 1.
> 

Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>

> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 727b4b6ac696..5fd46bf1a11b 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -54,6 +54,7 @@
>  #include <linux/iio/sysfs.h>
>  #include <linux/interrupt.h>
>  #include <linux/irq.h>
> +#include <linux/minmax.h>
>  #include <linux/pm.h>
>  #include <linux/property.h>
>  #include <linux/regmap.h>
> @@ -1607,8 +1608,7 @@ int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val)
>  	struct st_lsm6dsx_hw *hw = sensor->hw;
>  	int err;
>  
> -	if (val < 1 || val > hw->settings->fifo_ops.max_size)
> -		return -EINVAL;
> +	val = clamp_val(val, 1, hw->settings->fifo_ops.max_size);
>  
>  	mutex_lock(&hw->conf_lock);
>  
> -- 
> 2.34.1
>