mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: tanveer1.alam@intel.com
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, abhijeet.rao@intel.com
Subject: Re: [PATCH] usb: typec: mux: intel_pmc_mux: Add retry logic to a PMC command
Date: Fri, 1 Apr 2022 16:53:31 +0300	[thread overview]
Message-ID: <YkcD25gTJ07h7XDK@kuha.fi.intel.com> (raw)
In-Reply-To: <20220328105137.6223-1-tanveer1.alam@intel.com>

On Mon, Mar 28, 2022 at 04:21:37PM +0530, tanveer1.alam@intel.com wrote:
> From: Tanveer Alam <tanveer1.alam@intel.com>
> 
> There are few scenerio when PMC reports 'busy condition' and command
> fail.
> 
> If PMC receives a high priority command while servicing a low priority
> command then it discards the low priority command and start servicing
> the high priority command. The lower priority command fail and driver
> returns error. If the same command resend to the PMC then PMC latches
> the command and service it accordingly.
> 
> Thus adds the retry logic for the PMC command.
> 
> Signed-off-by: Tanveer Alam <tanveer1.alam@intel.com>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  drivers/usb/typec/mux/intel_pmc_mux.c | 21 +++++++++++++++++++--
>  1 file changed, 19 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
> index 2cdd22130834..da6b381ddf00 100644
> --- a/drivers/usb/typec/mux/intel_pmc_mux.c
> +++ b/drivers/usb/typec/mux/intel_pmc_mux.c
> @@ -173,7 +173,7 @@ static int hsl_orientation(struct pmc_usb_port *port)
>  	return port->orientation - 1;
>  }
>  
> -static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
> +static int pmc_usb_send_command(struct intel_scu_ipc_dev *ipc, u8 *msg, u32 len)
>  {
>  	u8 response[4];
>  	u8 status_res;
> @@ -184,7 +184,7 @@ static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
>  	 * Status can be checked from the response message if the
>  	 * function intel_scu_ipc_dev_command succeeds.
>  	 */
> -	ret = intel_scu_ipc_dev_command(port->pmc->ipc, PMC_USBC_CMD, 0, msg,
> +	ret = intel_scu_ipc_dev_command(ipc, PMC_USBC_CMD, 0, msg,
>  					len, response, sizeof(response));
>  
>  	if (ret)
> @@ -203,6 +203,23 @@ static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
>  	return 0;
>  }
>  
> +static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
> +{
> +	int retry_count = 3;
> +	int ret;
> +
> +	/*
> +	 * If PMC is busy then retry the command once again
> +	 */
> +	while (retry_count--) {
> +		ret = pmc_usb_send_command(port->pmc->ipc, msg, len);
> +		if (ret != -EBUSY)
> +			break;
> +	}
> +
> +	return ret;
> +}
> +
>  static int
>  pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_displayport_data *dp)
>  {

thanks,

-- 
heikki

  reply	other threads:[~2022-04-01 13:53 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-28 10:51 tanveer1.alam
2022-04-01 13:53 ` Heikki Krogerus [this message]
  -- strict thread matches above, loose matches on Subject: below --
2022-03-28 10:44 tanveer1.alam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YkcD25gTJ07h7XDK@kuha.fi.intel.com \
    --to=heikki.krogerus@linux.intel.com \
    --cc=abhijeet.rao@intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=tanveer1.alam@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®