From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Ricardo Ribalda <ribalda@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] media: uvc: Undup use uvv-endpoint_max_bpi code
Date: Mon, 25 Apr 2022 01:31:12 +0300 [thread overview]
Message-ID: <YmXPsPY+Ef4/U525@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20220401172437.625645-2-ribalda@chromium.org>
Hi Ricardo,
Thank you for the patch.
And here the subject line should mention uvc_endpoint_max_bpi() :-)
While at it, I'll replace "uvc" with "uvcvideo".
On Fri, Apr 01, 2022 at 07:24:37PM +0200, Ricardo Ribalda wrote:
> Replace manual decoding of psize in uvc_parse_streaming(), with the code
> from uvc_endpoint_max_bpi(). It also handles usb3 devices.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> ---
> drivers/media/usb/uvc/uvc_driver.c | 4 +---
> drivers/media/usb/uvc/uvc_video.c | 3 +--
> drivers/media/usb/uvc/uvcvideo.h | 1 +
> 3 files changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> index dda0f0aa78b8..977566aa2c89 100644
> --- a/drivers/media/usb/uvc/uvc_driver.c
> +++ b/drivers/media/usb/uvc/uvc_driver.c
> @@ -1009,9 +1009,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
> streaming->header.bEndpointAddress);
> if (ep == NULL)
> continue;
> -
> - psize = le16_to_cpu(ep->desc.wMaxPacketSize);
> - psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
> + psize = uvc_endpoint_max_bpi(dev->udev, ep);
> if (psize > streaming->maxpsize)
> streaming->maxpsize = psize;
> }
> diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> index a2dcfeaaac1b..9dc0a5dba158 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -1756,8 +1756,7 @@ static void uvc_video_stop_transfer(struct uvc_streaming *stream,
> /*
> * Compute the maximum number of bytes per interval for an endpoint.
> */
> -static unsigned int uvc_endpoint_max_bpi(struct usb_device *dev,
> - struct usb_host_endpoint *ep)
> +u16 uvc_endpoint_max_bpi(struct usb_device *dev, struct usb_host_endpoint *ep)
> {
> u16 psize;
>
> diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> index 143230b3275b..28eb337a6cfb 100644
> --- a/drivers/media/usb/uvc/uvcvideo.h
> +++ b/drivers/media/usb/uvc/uvcvideo.h
> @@ -911,6 +911,7 @@ void uvc_simplify_fraction(u32 *numerator, u32 *denominator,
> u32 uvc_fraction_to_interval(u32 numerator, u32 denominator);
> struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts,
> u8 epaddr);
> +u16 uvc_endpoint_max_bpi(struct usb_device *dev, struct usb_host_endpoint *ep);
>
> /* Quirks support */
> void uvc_video_decode_isight(struct uvc_urb *uvc_urb,
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2022-04-24 22:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-01 17:24 [PATCH 1/2] media: uvc: simplify uvc_enpoint_max_bpi Ricardo Ribalda
2022-04-01 17:24 ` [PATCH 2/2] media: uvc: Undup use uvv-endpoint_max_bpi code Ricardo Ribalda
2022-04-24 22:31 ` Laurent Pinchart [this message]
2022-04-24 22:18 ` [PATCH 1/2] media: uvc: simplify uvc_enpoint_max_bpi Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YmXPsPY+Ef4/U525@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=ribalda@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®