From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Javier Martinez Canillas <javierm@redhat.com>
Cc: linux-kernel@vger.kernel.org,
Thomas Zimmermann <tzimmermann@suse.de>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
dri-devel@lists.freedesktop.org,
virtualization@lists.linux-foundation.org
Subject: Re: [PATCH v2 1/3] drm: Remove superfluous arg when calling to drm_fbdev_generic_setup()
Date: Mon, 2 May 2022 19:06:37 +0300 [thread overview]
Message-ID: <YnABjdpGC166yIY7@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20220502153900.408522-2-javierm@redhat.com>
Hi Javier,
Thank you for the patch.
On Mon, May 02, 2022 at 05:38:58PM +0200, Javier Martinez Canillas wrote:
> The drm_fbdev_generic_setup() function already sets the preferred bits per
> pixel for the device to dev->mode_config.preferred_depth, if preferred_bpp
> value is zero.
>
> Passing the same value to the function is unnecessary. Let's cleanup that
> in the two drivers that do it.
This looks fine, so
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
but why do we have two different mechanisms to set the preferred depth ?
Could we get all drivers to set dev->mode_config.preferred_depth and
drop the depth option to drm_fbdev_generic_setup() ? There's a FIXME
comment in drm_fbdev_generic_setup() that could be related.
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
> ---
>
> (no changes since v1)
>
> drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 2 +-
> drivers/gpu/drm/tiny/cirrus.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
> index fe4269c5aa0a..ace92459e462 100644
> --- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
> @@ -349,7 +349,7 @@ static int hibmc_pci_probe(struct pci_dev *pdev,
> goto err_unload;
> }
>
> - drm_fbdev_generic_setup(dev, dev->mode_config.preferred_depth);
> + drm_fbdev_generic_setup(dev, 0);
>
> return 0;
>
> diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
> index c8e791840862..ed5a2e14894a 100644
> --- a/drivers/gpu/drm/tiny/cirrus.c
> +++ b/drivers/gpu/drm/tiny/cirrus.c
> @@ -601,7 +601,7 @@ static int cirrus_pci_probe(struct pci_dev *pdev,
> if (ret)
> return ret;
>
> - drm_fbdev_generic_setup(dev, dev->mode_config.preferred_depth);
> + drm_fbdev_generic_setup(dev, 0);
> return 0;
> }
>
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2022-05-02 16:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-02 15:38 [PATCH v2 0/3] drm: Allow simpledrm to setup its emulated FB as firmware provided Javier Martinez Canillas
2022-05-02 15:38 ` [PATCH v2 1/3] drm: Remove superfluous arg when calling to drm_fbdev_generic_setup() Javier Martinez Canillas
2022-05-02 16:06 ` Laurent Pinchart [this message]
2022-05-02 16:55 ` Javier Martinez Canillas
2022-05-02 17:15 ` Javier Martinez Canillas
2022-05-02 18:36 ` Laurent Pinchart
2022-05-02 19:28 ` Javier Martinez Canillas
2022-05-02 19:41 ` Laurent Pinchart
2022-05-02 15:38 ` [PATCH v2 2/3] drm/fb-helper: Rename preferred_bpp drm_fbdev_generic_setup() parameter Javier Martinez Canillas
2022-05-02 16:07 ` Laurent Pinchart
2022-05-02 16:57 ` Javier Martinez Canillas
2022-05-02 15:39 ` [PATCH v2 3/3] drm: Allow simpledrm to setup its emulated FB as firmware provided Javier Martinez Canillas
2022-05-02 16:17 ` Laurent Pinchart
2022-05-02 17:09 ` Javier Martinez Canillas
2022-05-02 18:01 ` Laurent Pinchart
2022-05-02 19:32 ` Javier Martinez Canillas
2022-05-02 21:40 ` kernel test robot
2022-05-03 1:05 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YnABjdpGC166yIY7@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=javierm@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tzimmermann@suse.de \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®