Re: [PATCH v3 1/7] media: uvcvideo: Add missing value for power_line_frequency

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Ricardo,

Thank you for the patch.

On Tue, Jun 07, 2022 at 03:43:58PM +0200, Ricardo Ribalda wrote:
> UVC 1.5 class defines 4 values for this control on:
> 4.2.2.3.6 Power Line Frequency Control
> 
> Add the missing value when the uvc version is 1.5.
> 
> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> ---
>  drivers/media/usb/uvc/uvc_ctrl.c | 67 ++++++++++++++++++++++++++------
>  1 file changed, 55 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
> index 0e78233fc8a0..f9d4ac81e62f 100644
> --- a/drivers/media/usb/uvc/uvc_ctrl.c
> +++ b/drivers/media/usb/uvc/uvc_ctrl.c
> @@ -362,12 +362,19 @@ static const u32 uvc_control_classes[] = {
>  	V4L2_CID_USER_CLASS,
>  };
>  
> -static const struct uvc_menu_info power_line_frequency_controls[] = {
> +static const struct uvc_menu_info power_line_frequency_controls_uvc11[] = {
>  	{ 0, "Disabled" },
>  	{ 1, "50 Hz" },
>  	{ 2, "60 Hz" },
>  };

Let's drop this, and ...

>  
> +static const struct uvc_menu_info power_line_frequency_controls_uvc15[] = {

... rename this to power_line_frequency_controls, and ...

> +	{ 0, "Disabled" },
> +	{ 1, "50 Hz" },
> +	{ 2, "60 Hz" },
> +	{ 3, "Auto" },
> +};
> +
>  static const struct uvc_menu_info exposure_auto_controls[] = {
>  	{ 2, "Auto Mode" },
>  	{ 1, "Manual Mode" },
> @@ -504,17 +511,6 @@ static const struct uvc_control_mapping uvc_ctrl_mappings[] = {
>  		.v4l2_type	= V4L2_CTRL_TYPE_INTEGER,
>  		.data_type	= UVC_CTRL_DATA_TYPE_UNSIGNED,
>  	},
> -	{
> -		.id		= V4L2_CID_POWER_LINE_FREQUENCY,
> -		.entity		= UVC_GUID_UVC_PROCESSING,
> -		.selector	= UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
> -		.size		= 2,
> -		.offset		= 0,
> -		.v4l2_type	= V4L2_CTRL_TYPE_MENU,
> -		.data_type	= UVC_CTRL_DATA_TYPE_ENUM,
> -		.menu_info	= power_line_frequency_controls,
> -		.menu_count	= ARRAY_SIZE(power_line_frequency_controls),
> -	},
>  	{
>  		.id		= V4L2_CID_HUE_AUTO,
>  		.entity		= UVC_GUID_UVC_PROCESSING,
> @@ -730,6 +726,32 @@ static const struct uvc_control_mapping uvc_ctrl_mappings[] = {
>  	},
>  };
>  
> +static const
> +struct uvc_control_mapping power_line_mapping_uvc11 = {
> +	.id		= V4L2_CID_POWER_LINE_FREQUENCY,
> +	.entity		= UVC_GUID_UVC_PROCESSING,
> +	.selector	= UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
> +	.size		= 2,
> +	.offset		= 0,
> +	.v4l2_type	= V4L2_CTRL_TYPE_MENU,
> +	.data_type	= UVC_CTRL_DATA_TYPE_ENUM,
> +	.menu_info	= power_line_frequency_controls_uvc11,
> +	.menu_count	= ARRAY_SIZE(power_line_frequency_controls_uvc11),

... use

	.menu_count	= ARRAY_SIZE(power_line_frequency_controls) - 1,

here. It will avoid duplicating the common menu items.

> +};
> +
> +static const
> +struct uvc_control_mapping power_line_mapping_uvc15 = {

This holds on a single line (and same for uvc11).

> +	.id		= V4L2_CID_POWER_LINE_FREQUENCY,
> +	.entity		= UVC_GUID_UVC_PROCESSING,
> +	.selector	= UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
> +	.size		= 2,
> +	.offset		= 0,
> +	.v4l2_type	= V4L2_CTRL_TYPE_MENU,
> +	.data_type	= UVC_CTRL_DATA_TYPE_ENUM,
> +	.menu_info	= power_line_frequency_controls_uvc15,
> +	.menu_count	= ARRAY_SIZE(power_line_frequency_controls_uvc15),
> +};

How about turning those two into arrays (named uvc_ctrl_mappings_uvc11
and uvc_ctrl_mappings_uvc15) ? uvc_ctrl_init_ctrl() would first loop
over uvc_ctrl_mappings, and then over the version-specific arrays. This
would ease support of further version-specific controls.

> +
>  /* ------------------------------------------------------------------------
>   * Utility functions
>   */
> @@ -2376,6 +2398,22 @@ static void uvc_ctrl_prune_entity(struct uvc_device *dev,
>  	}
>  }
>  
> +/*
> + * The powerline control has different valid values depending on the
> + * uvc version.
> + */
> +static void uvc_ctrl_init_powerline(struct uvc_video_chain *chain,
> +				    struct uvc_control *ctrl)
> +{
> +	if (chain->dev->uvc_version < 0x0150) {
> +		__uvc_ctrl_add_mapping(chain, ctrl,
> +				       &power_line_mapping_uvc11);
> +		return;
> +	}
> +
> +	__uvc_ctrl_add_mapping(chain, ctrl, &power_line_mapping_uvc15);
> +}
> +
>  /*
>   * Add control information and hardcoded stock control mappings to the given
>   * device.
> @@ -2385,6 +2423,7 @@ static void uvc_ctrl_init_ctrl(struct uvc_video_chain *chain,
>  {
>  	const struct uvc_control_info *info = uvc_ctrls;
>  	const struct uvc_control_info *iend = info + ARRAY_SIZE(uvc_ctrls);
> +	static const u8 uvc_processing_guid[16] = UVC_GUID_UVC_PROCESSING;

Please move this first, the driver declares static variables before the
non-static ones.

>  	const struct uvc_control_mapping *mapping = uvc_ctrl_mappings;
>  	const struct uvc_control_mapping *mend =
>  		mapping + ARRAY_SIZE(uvc_ctrl_mappings);
> @@ -2415,6 +2454,10 @@ static void uvc_ctrl_init_ctrl(struct uvc_video_chain *chain,
>  	if (!ctrl->initialized)
>  		return;
>  
> +	if (uvc_entity_match_guid(ctrl->entity, uvc_processing_guid) &&
> +	    ctrl->info.selector == UVC_PU_POWER_LINE_FREQUENCY_CONTROL)
> +		return uvc_ctrl_init_powerline(chain, ctrl);
> +
>  	for (; mapping < mend; ++mapping) {
>  		if (uvc_entity_match_guid(ctrl->entity, mapping->entity) &&
>  		    ctrl->info.selector == mapping->selector)

-- 
Regards,

Laurent Pinchart