From: Sakari Ailus <sakari.ailus@iki.fi>
To: Mikhail Rudenko <mike.rudenko@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] media: dt-bindings: media: i2c: document OV4689 DT bindings
Date: Fri, 15 Jul 2022 00:11:20 +0300 [thread overview]
Message-ID: <YtCGeBp5U18ljyuX@valkosipuli.retiisi.eu> (raw)
In-Reply-To: <20220712141925.678595-2-mike.rudenko@gmail.com>
Hi Mikhail,
Thanks for the patch.
On Tue, Jul 12, 2022 at 05:19:09PM +0300, Mikhail Rudenko wrote:
> Add device-tree binding documentation for OV4689 image sensor driver,
> and the relevant MAINTAINERS entries.
>
> Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
> ---
> .../bindings/media/i2c/ovti,ov4689.yaml | 122 ++++++++++++++++++
> MAINTAINERS | 7 +
> 2 files changed, 129 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
> new file mode 100644
> index 000000000000..6bdebe5862b4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
> @@ -0,0 +1,122 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV4689 CMOS Sensor Device Tree Bindings
> +
> +maintainers:
> + - Mikhail Rudenko <mike.rudenko@gmail.com>
> +
> +description: |-
> + The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel
> + image sensor. Ihis chip supports high frame rate speeds up to 90 fps
> + at 2688x1520 resolution. It is programmable through an I2C
> + interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2
> + connection.
> +
> +allOf:
> + - $ref: /schemas/media/video-interface-devices.yaml#
> +
> +properties:
> + compatible:
> + const: ovti,ov4689
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + description:
> + External clock for the sensor.
> + items:
> + - const: xclk
> +
> + dovdd-supply:
> + description:
> + Definition of the regulator used as Digital I/O voltage supply.
> +
> + avdd-supply:
> + description:
> + Definition of the regulator used as Analog voltage supply.
> +
> + dvdd-supply:
> + description:
> + Definition of the regulator used as Digital core voltage supply.
> +
> + powerdown-gpios:
> + maxItems: 1
> + description:
> + Reference to the GPIO connected to the powerdown pin (active low).
> +
> + reset-gpios:
> + maxItems: 1
> + description:
> + Reference to the GPIO connected to the reset pin (active low).
> +
> + orientation: true
> +
> + rotation: true
> +
> + port:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + additionalProperties: false
> + description:
> + Output port node, single endpoint describing the CSI-2 transmitter.
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
The number of lanes is needed, please require data-lanes property here (as
well as add it to the example).
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - dovdd-supply
> + - avdd-supply
> + - dvdd-supply
> + - powerdown-gpios
> + - reset-gpios
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ov4689: camera@36 {
> + compatible = "ovti,ov4689";
> + reg = <0x36>;
> +
> + clocks = <&ov4689_clk>;
> + clock-names = "xclk";
> +
> + avdd-supply = <&ov4689_avdd>;
> + dovdd-supply = <&ov4689_dovdd>;
> + dvdd-supply = <&ov4689_dvdd>;
> +
> + powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>;
> +
> + orientation = <2>;
> + rotation = <0>;
> +
> + port {
> + wcam_out: endpoint {
> + remote-endpoint = <&mipi_in_wcam>;
> + };
> + };
> + };
> + };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f468864fd268..63c4844f26e6 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14523,6 +14523,13 @@ S: Maintained
> T: git git://linuxtv.org/media_tree.git
> F: drivers/media/i2c/ov2740.c
>
> +OMNIVISION OV4689 SENSOR DRIVER
> +M: Mikhail Rudenko <mike.rudenko@gmail.com>
> +L: linux-media@vger.kernel.org
> +S: Maintained
> +T: git git://linuxtv.org/media_tree.git
> +F: Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
> +
> OMNIVISION OV5640 SENSOR DRIVER
> M: Steve Longerbeam <slongerbeam@gmail.com>
> L: linux-media@vger.kernel.org
--
Regards,
Sakari Ailus
next prev parent reply other threads:[~2022-07-14 21:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-12 14:19 [PATCH 0/2] Add Omnivision OV4689 image sensor driver Mikhail Rudenko
2022-07-12 14:19 ` [PATCH 1/2] media: dt-bindings: media: i2c: document OV4689 DT bindings Mikhail Rudenko
2022-07-12 15:12 ` Krzysztof Kozlowski
2022-07-12 16:40 ` Mikhail Rudenko
2022-07-14 21:11 ` Sakari Ailus [this message]
2022-07-14 21:43 ` Mikhail Rudenko
2022-07-12 14:19 ` [PATCH 2/2] media: i2c: add support for ov4689 Mikhail Rudenko
2022-08-15 16:59 ` [PATCH 0/2] Add Omnivision OV4689 image sensor driver Mikhail Rudenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YtCGeBp5U18ljyuX@valkosipuli.retiisi.eu \
--to=sakari.ailus@iki.fi \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mike.rudenko@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®