From: Peter Zijlstra <peterz@infradead.org>
To: x86@kernel.org
Cc: Jann Horn <jannh@google.com>,
Natalie Silvanovich <natashenka@google.com>,
Seth Jenkins <sethjenkins@google.com>,
Kees Cook <keescook@chromium.org>,
linux-kernel@vger.kernel.org, Jason@zx2c4.com
Subject: x86/mm: Randomize per-cpu entry area
Date: Fri, 7 Oct 2022 10:42:36 +0200 [thread overview]
Message-ID: <Yz/mfJ1gjgshF19t@hirez.programming.kicks-ass.net> (raw)
Seth found that the CPU-entry-area; the piece of per-cpu data that is
mapped into the userspace page-tables for kPTI is not subject to any
randomization -- irrespective of kASLR settings.
On x86_64 a whole P4D (512 GB) of virtual address space is reserved for
this structure, which is plenty large enough to randomize things a
little.
As such, use a straight forward randomization scheme that avoids
duplicates to spread the existing CPUs over the available space.
Reported-by: Seth Jenkins <sethjenkins@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
arch/x86/include/asm/cpu_entry_area.h | 4 --
arch/x86/include/asm/pgtable_areas.h | 8 +++++
arch/x86/kernel/hw_breakpoint.c | 2 -
arch/x86/mm/cpu_entry_area.c | 46 +++++++++++++++++++++++++++++++---
4 files changed, 50 insertions(+), 10 deletions(-)
--- a/arch/x86/include/asm/cpu_entry_area.h
+++ b/arch/x86/include/asm/cpu_entry_area.h
@@ -130,10 +130,6 @@ struct cpu_entry_area {
};
#define CPU_ENTRY_AREA_SIZE (sizeof(struct cpu_entry_area))
-#define CPU_ENTRY_AREA_ARRAY_SIZE (CPU_ENTRY_AREA_SIZE * NR_CPUS)
-
-/* Total size includes the readonly IDT mapping page as well: */
-#define CPU_ENTRY_AREA_TOTAL_SIZE (CPU_ENTRY_AREA_ARRAY_SIZE + PAGE_SIZE)
DECLARE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
DECLARE_PER_CPU(struct cea_exception_stacks *, cea_exception_stacks);
--- a/arch/x86/include/asm/pgtable_areas.h
+++ b/arch/x86/include/asm/pgtable_areas.h
@@ -11,6 +11,12 @@
#define CPU_ENTRY_AREA_RO_IDT_VADDR ((void *)CPU_ENTRY_AREA_RO_IDT)
-#define CPU_ENTRY_AREA_MAP_SIZE (CPU_ENTRY_AREA_PER_CPU + CPU_ENTRY_AREA_ARRAY_SIZE - CPU_ENTRY_AREA_BASE)
+#ifdef CONFIG_X86_32
+#define CPU_ENTRY_AREA_MAP_SIZE (CPU_ENTRY_AREA_PER_CPU + \
+ (CPU_ENTRY_AREA_SIZE * NR_CPUS) - \
+ CPU_ENTRY_AREA_BASE
+#else
+#define CPU_ENTRY_AREA_MAP_SIZE P4D_SIZE
+#endif
#endif /* _ASM_X86_PGTABLE_AREAS_H */
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -266,7 +266,7 @@ static inline bool within_cpu_entry(unsi
/* CPU entry erea is always used for CPU entry */
if (within_area(addr, end, CPU_ENTRY_AREA_BASE,
- CPU_ENTRY_AREA_TOTAL_SIZE))
+ CPU_ENTRY_AREA_MAP_SIZE))
return true;
/*
--- a/arch/x86/mm/cpu_entry_area.c
+++ b/arch/x86/mm/cpu_entry_area.c
@@ -15,16 +15,53 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(struc
#ifdef CONFIG_X86_64
static DEFINE_PER_CPU_PAGE_ALIGNED(struct exception_stacks, exception_stacks);
DEFINE_PER_CPU(struct cea_exception_stacks*, cea_exception_stacks);
-#endif
-#ifdef CONFIG_X86_32
+static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, _cea_offset);
+
+static inline unsigned int cea_offset(unsigned int cpu)
+{
+ return per_cpu(_cea_offset, cpu);
+}
+
+static __init void init_cea_offsets(void)
+{
+ unsigned int max_cea;
+ unsigned int i, j;
+
+ max_cea = (CPU_ENTRY_AREA_MAP_SIZE - PAGE_SIZE) / CPU_ENTRY_AREA_SIZE;
+
+ /* O(sodding terrible) */
+ for_each_possible_cpu(i) {
+ unsigned int cea;
+
+again:
+ cea = prandom_u32_max(max_cea);
+
+ for_each_possible_cpu(j) {
+ if (cea_offset(j) == cea)
+ goto again;
+
+ if (i == j)
+ break;
+ }
+
+ per_cpu(_cea_offset, i) = cea;
+ }
+}
+#else /* !X86_64 */
DECLARE_PER_CPU_PAGE_ALIGNED(struct doublefault_stack, doublefault_stack);
+
+static inline unsigned int cea_offset(unsigned int cpu)
+{
+ return cpu;
+}
+static inline void init_cea_offsets(void) { }
#endif
/* Is called from entry code, so must be noinstr */
noinstr struct cpu_entry_area *get_cpu_entry_area(int cpu)
{
- unsigned long va = CPU_ENTRY_AREA_PER_CPU + cpu * CPU_ENTRY_AREA_SIZE;
+ unsigned long va = CPU_ENTRY_AREA_PER_CPU + cea_offset(cpu) * CPU_ENTRY_AREA_SIZE;
BUILD_BUG_ON(sizeof(struct cpu_entry_area) % PAGE_SIZE != 0);
return (struct cpu_entry_area *) va;
@@ -205,7 +242,6 @@ static __init void setup_cpu_entry_area_
/* The +1 is for the readonly IDT: */
BUILD_BUG_ON((CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
- BUILD_BUG_ON(CPU_ENTRY_AREA_TOTAL_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
BUG_ON(CPU_ENTRY_AREA_BASE & ~PMD_MASK);
start = CPU_ENTRY_AREA_BASE;
@@ -221,6 +257,8 @@ void __init setup_cpu_entry_areas(void)
{
unsigned int cpu;
+ init_cea_offsets();
+
setup_cpu_entry_area_ptes();
for_each_possible_cpu(cpu)
next reply other threads:[~2022-10-07 8:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-07 8:42 Peter Zijlstra [this message]
2022-10-07 14:44 ` Jason A. Donenfeld
2022-10-07 15:14 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Yz/mfJ1gjgshF19t@hirez.programming.kicks-ass.net \
--to=peterz@infradead.org \
--cc=Jason@zx2c4.com \
--cc=jannh@google.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=natashenka@google.com \
--cc=sethjenkins@google.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®