mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: maudspierings@gocontroll.com
Cc: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 8/9] arm64: dts: freescale: Add the BOE av123z7m-n17 variant of the Moduline Displayy
Date: Wed, 2 Apr 2025 15:36:58 -0400	[thread overview]
Message-ID: <Z+2R2r5ba6f5pLfn@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20250402-initial_display-v4-8-9f898838a864@gocontroll.com>

On Wed, Apr 02, 2025 at 09:07:11AM +0200, Maud Spierings via B4 Relay wrote:
> From: Maud Spierings <maudspierings@gocontroll.com>
>
> Add the BOE av123z7m-n17 variant of the Moduline Display, this variant
> comes with a 12.3" 1920x720 display.
>
> Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
>
> ---
> Currently the backlight driver is not available, this will be upstreamed
> in a future patch series. It is a Maxim max25014atg.
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  ...x8p-ml81-moduline-display-106-av123z7m-n17.dtso | 139 +++++++++++++++++++++
>  1 file changed, 139 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso
> new file mode 100644
> index 0000000000000000000000000000000000000000..dc0f86ca55fb6c21f10fbd333374a89002bb71c0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2025 GOcontroll B.V.
> + * Author: Maud Spierings <maudspierings@gocontroll.com>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +#include "imx8mp-pinfunc.h"
> +
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> +	model = "GOcontroll Moduline Display with BOE av123z7m-n17 display";
> +
> +	panel {
> +		compatible = "boe,av123z7m-n17";
> +		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&pinctrl_panel>;
> +		pinctrl-names = "default";
> +		power-supply = <&reg_3v3_per>;
> +		reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				dual-lvds-odd-pixels;
> +
> +				panel_in0: endpoint {
> +					remote-endpoint = <&lvds1_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				dual-lvds-even-pixels;
> +
> +				panel_in1: endpoint {
> +					remote-endpoint = <&lvds0_out>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&i2c4 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	/* sn65dsi85 */
> +	bridge@2d {
> +		compatible = "ti,sn65dsi84";
> +		reg = <0x2d>;
> +		enable-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&pinctrl_lvds_bridge>;
> +		pinctrl-names = "default";
> +		vcc-supply = <&reg_1v8_per>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				dsi_lvds_bridge_in: endpoint {
> +					data-lanes = <1 2 3 4>;
> +					remote-endpoint = <&mipi_dsi_out>;
> +				};
> +			};
> +
> +			port@2 {
> +				reg = <2>;
> +
> +				lvds0_out: endpoint {
> +					remote-endpoint = <&panel_in1>;
> +				};
> +			};
> +
> +			port@3 {
> +				reg = <3>;
> +
> +				lvds1_out: endpoint {
> +					remote-endpoint = <&panel_in0>;
> +				};
> +			};
> +		};
> +	};
> +
> +	/* max25014 @ 0x6f */
> +};
> +
> +&iomuxc {
> +	pinctrl_lvds_bridge: lvdsbridgegrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14
> +			MX8MP_DSE_X1
> +		>;
> +	};
> +
> +	pinctrl_panel: panelgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07
> +			MX8MP_DSE_X1
> +			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09
> +			MX8MP_DSE_X1
> +		>;
> +	};
> +};
> +
> +&lcdif1 {
> +	status = "okay";
> +};
> +
> +&mipi_dsi {
> +	/*
> +	 * burst has to be at least 2x dsi clock that the sn65dsi85 expects
> +	 * display pixelclock * bpp / lanes / 2 = dsi clock
> +	 * 88.000.000 * 24 / 4 / 2 = 264.000.000
> +	 * range gets rounded up to 265.000.000 - 270.000.000
> +	 * 267.500.000 * 2 = 535.000.000
> +	 */
> +	samsung,burst-clock-frequency = <535000000>;
> +	samsung,esc-clock-frequency = <12000000>;
> +	status = "okay";
> +
> +	ports {
> +		port@1 {
> +			mipi_dsi_out: endpoint {
> +				data-lanes = <1 2 3 4>;
> +				remote-endpoint = < &dsi_lvds_bridge_in>;
> +			};
> +		};
> +	};
> +};
>
> --
> 2.49.0
>
>

  reply	other threads:[~2025-04-02 19:37 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-02  7:07 [PATCH v4 0/9] arm64: dts: freescale: Add support for the GOcontroll Moduline Display Maud Spierings via B4 Relay
2025-04-02  7:07 ` [PATCH v4 1/9] dt-bindings: arm: fsl: Add " Maud Spierings via B4 Relay
2025-04-02  7:07 ` [PATCH v4 2/9] arm64: dts: imx8mp: Add pinctrl config definitions Maud Spierings via B4 Relay
2025-04-02  7:07 ` [PATCH v4 3/9] MAINTAINERS: add maintainer for the Ka-Ro tx8p-ml81 COM module Maud Spierings via B4 Relay
2025-04-03  7:45   ` Krzysztof Kozlowski
2025-04-03 12:50     ` Daniel Baluta
2025-04-03 14:07       ` Krzysztof Kozlowski
2025-04-02  7:07 ` [PATCH v4 4/9] MAINTAINERS: add maintainer for the GOcontroll Moduline controllers Maud Spierings via B4 Relay
2025-04-02 19:17   ` [PATCH v4 4/9] MAINTAINERS: add maintainer for the GOcontroll Moduline controllersy Frank Li
2025-04-03  6:17     ` Maud Spierings | GOcontroll
2025-04-03  7:44     ` Krzysztof Kozlowski
2025-04-02  7:07 ` [PATCH v4 5/9] arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM Maud Spierings via B4 Relay
2025-04-02 19:24   ` [PATCH v4 5/9] arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COMy Frank Li
2025-04-03  7:36     ` Maud Spierings | GOcontroll
2025-04-02  7:07 ` [PATCH v4 6/9] arm64: dts: freescale: Add the GOcontroll Moduline Display baseboard Maud Spierings via B4 Relay
2025-04-02 19:31   ` [PATCH v4 6/9] arm64: dts: freescale: Add the GOcontroll Moduline Display baseboardy Frank Li
2025-04-02  7:07 ` [PATCH v4 7/9] arm64: dts: freescale: Add the BOE av101hdt-a10 variant of the Moduline Display Maud Spierings via B4 Relay
2025-04-02 19:35   ` [PATCH v4 7/9] arm64: dts: freescale: Add the BOE av101hdt-a10 variant of the Moduline Displayy Frank Li
2025-04-03  7:44     ` Maud Spierings | GOcontroll
2025-04-02  7:07 ` [PATCH v4 8/9] arm64: dts: freescale: Add the BOE av123z7m-n17 variant of the Moduline Display Maud Spierings via B4 Relay
2025-04-02 19:36   ` Frank Li [this message]
2025-04-02  7:07 ` [PATCH v4 9/9] arm64: dts: Add Moduline Display boards to Makefile Maud Spierings via B4 Relay
2025-04-02 19:38   ` [PATCH v4 9/9] arm64: dts: Add Moduline Display boards to Makefiley Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z+2R2r5ba6f5pLfn@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maudspierings@gocontroll.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®