Re: [PATCH v8 1/1] serial: core: Start managing serial controllers to enable runtime PM

[Andy Shevchenko <andriy.shevchenko@intel.com>]

On Wed, Mar 22, 2023 at 01:12:51PM +0200, Tony Lindgren wrote:
> We want to enable runtime PM for serial port device drivers in a generic
> way. To do this, we want to have the serial core layer manage the
> registered physical serial controller devices.
> 
> To do this, let's set up a struct bus and struct device for the serial
> core controller as suggested by Greg and Jiri. The serial core controller
> devices are children of the physical serial port device. The serial core
> controller device is needed to support multiple different kind of ports
> connected to single physical serial port device.
> 
> Let's also set up a struct device for the serial core port. The serial
> core port instances are children of the serial core controller device.
> 
> With the serial core port device we can now flush pending TX on the
> runtime PM resume as suggested by Johan.

With below addressed, FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>

...

> +	device_initialize(&sbd->dev);
> +	sbd->dev.parent = parent_dev;
> +	sbd->dev.bus = &serial_base_bus_type;
> +	sbd->dev.release = &serial_base_release;
> +
> +	if (str_has_prefix(name, "ctrl")) {
> +		id = port->ctrl_id;
> +	} else {
> +		id = port->line;
> +		sbd->port = port;
> +	}
> +
> +	err = dev_set_name(&sbd->dev, "%s.%s.%d", name, dev_name(port->dev), id);
> +	if (err)
> +		goto err_free_dev;
> +
> +	err = device_add(&sbd->dev);
> +	if (err)
> +		goto err_put_device;
> +
> +	return &sbd->dev;
> +
> +err_put_device:
> +	put_device(&sbd->dev);

> +	kfree_const(sbd->dev.kobj.name);

This is double free if not const, right?
At least that's how I read kobject_cleanup() implementation.

Sorry I haven't paid attention to this earlier.

...

> +/*
> + * Serial core port device driver
> + */

Put it on one line for now?

-- 
With Best Regards,
Andy Shevchenko