From: Pavel Machek <pavel@ucw.cz>
To: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Lee Jones <lee@kernel.org>,
Patrick Rudolph <patrick.rudolph@9elements.com>,
linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org
Subject: Re: [PATCH v4] leds: max597x: Add support for max597x
Date: Thu, 13 Apr 2023 13:13:40 +0200 [thread overview]
Message-ID: <ZDfj5I3l4O1FkiW3@duo.ucw.cz> (raw)
In-Reply-To: <20230413102624.3561299-1-Naresh.Solanki@9elements.com>
[-- Attachment #1: Type: text/plain, Size: 2929 bytes --]
Hi!
> From: Patrick Rudolph <patrick.rudolph@9elements.com>
>
> max597x is hot swap controller with indicator LED support.
> This driver uses DT property to configure led during boot time &
> also provide the LED control in sysfs.
>
> DTS example:
> i2c {
> #address-cells = <1>;
> #size-cells = <0>;
> regulator@3a {
> compatible = "maxim,max5978";
> reg = <0x3a>;
> vss1-supply = <&p3v3>;
>
> regulators {
> sw0_ref_0: sw0 {
> shunt-resistor-micro-ohms = <12000>;
> };
> };
>
> leds {
> #address-cells = <1>;
> #size-cells = <0>;
> led@0 {
> reg = <0>;
> label = "led0";
> default-state = "on";
> };
> led@1 {
> reg = <1>;
> label = "led1";
> default-state = "on";
> };
> };
> };
> };
>
Yeah, well, dts bindings need to be properly documented, and example
goes to the binding, right?
Plus, we should have better names than led0/led1. Something like
hdd0:green:something, based on what the LED does and what are you hot
swapping. See/modify Documentation/leds/well-known-leds.txt .
> +static int max597x_led_set_brightness(struct led_classdev *cdev,
> + enum led_brightness brightness)
> +{
> + struct max597x_led *ddata = ldev_to_maxled(cdev);
> + int ret, val;
> +
> + if (!ddata->regmap)
> + return -ENODEV;
> +
> + /* Set/Clear corresponding bit for given led index */
"/clear".
> + val = !brightness ? BIT(ddata->index) : 0;
> + ret = regmap_update_bits(ddata->regmap, MAX5970_REG_LED_FLASH, BIT(ddata->index), val);
> + if (ret < 0)
> + dev_err(cdev->dev, "failed to set brightness %d", ret);
'\n"'.
> + ddata->cdev.brightness_set_blocking = max597x_led_set_brightness;
> + ddata->cdev.default_trigger = "none";
So what do these leds normally do? Should they be registered with
common function to handle default triggers etc?
> + ddata->index = reg;
> + ddata->regmap = regmap;
> + ret = devm_led_classdev_register(dev, &ddata->cdev);
> + if (ret)
> + dev_err(dev, "Error initializing LED %s", ddata->cdev.name);
'\n"'.
> +module_platform_driver(max597x_led_driver);
> +MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
> +MODULE_DESCRIPTION("MAX5970_hot-swap controller LED driver");
"MAX5970 hot-swap"?
> +MODULE_LICENSE("GPL");
>
> base-commit: 11e572d06c23d61683e20a98bd16f550ef17ac65
> prerequisite-patch-id: 456044abe991b2ff3b521d337825432789d71b29
?? Send prerequisites in the series?
BR,
Pavel
--
People of Russia, stop Putin before his war on Ukraine escalates.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
next prev parent reply other threads:[~2023-04-13 11:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-13 10:26 Naresh Solanki
2023-04-13 11:13 ` Pavel Machek [this message]
2023-04-17 9:40 ` Naresh Solanki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZDfj5I3l4O1FkiW3@duo.ucw.cz \
--to=pavel@ucw.cz \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=naresh.solanki@9elements.com \
--cc=patrick.rudolph@9elements.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®