From: Mark Brown <broonie@kernel.org>
To: David Rau <David.Rau.opensource@dm.renesas.com>
Cc: support.opensource@diasemi.com, lgirdwood@gmail.com,
perex@perex.cz, tiwai@suse.com, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ASoC: da7219: Add Jack insertion detection polarity selection
Date: Thu, 4 May 2023 22:39:04 +0900 [thread overview]
Message-ID: <ZFO1eLaz11iLo1Td@finisterre.sirena.org.uk> (raw)
In-Reply-To: <20230504082218.24059-1-David.Rau.opensource@dm.renesas.com>
[-- Attachment #1: Type: text/plain, Size: 2423 bytes --]
On Thu, May 04, 2023 at 08:22:18AM +0000, David Rau wrote:
> +choice
> + bool "DA7219 Jack insertion detection polarity selection"
> + default DA7219_DEFAULT_JACK_INSERTION_POLARITY if (SND_SOC_DA7219)
> +
> +config DA7219_DEFAULT_JACK_INSERTION_POLARITY
> + bool "Default polarity"
> + depends on SND_SOC_DA7219
> + help
> + Select this option if your DA7219 codec with default Jack insertion detection polarity (Low).
> +
> +config DA7219_INVERTED_JACK_INSERTION_POLARITY
> + bool "Inverted polarity"
> + depends on SND_SOC_DA7219
> + help
> + Select this option if your DA7219 codec with inverted Jack insertion detection polarity (High).
I would expect these things to be fixed for a given board and therefore
configured with a DT property rather than a kernel config. It should be
possible to use the same kernel on multiple boards.
> +
> +endchoice
> +
> +endif # SND_SOC_DA7219
> +
> config SND_SOC_DA732X
> tristate
> depends on I2C
> diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c
> index 993a0d00bc48..9d16112cff6b 100644
> --- a/sound/soc/codecs/da7219-aad.c
> +++ b/sound/soc/codecs/da7219-aad.c
> @@ -879,6 +879,18 @@ static void da7219_aad_handle_gnd_switch_time(struct snd_soc_component *componen
> }
> }
>
> +static void da7219_aad_handle_polarity(struct snd_soc_component *component)
> +{
> + snd_soc_component_write(component, 0xF0, 0x8B);
> +
> + if (IS_ENABLED(CONFIG_DA7219_DEFAULT_JACK_INSERTION_POLARITY))
> + snd_soc_component_write(component, 0x75, 0x80);
> + else if (IS_ENABLED(CONFIG_DA7219_INVERTED_JACK_INSERTION_POLARITY))
> + snd_soc_component_write(component, 0x75, 0x00);
> +
> + snd_soc_component_write(component, 0xF0, 0x00);
> +}
> +
> /*
> * Suspend/Resume
> */
> @@ -955,8 +967,12 @@ int da7219_aad_init(struct snd_soc_component *component)
> snd_soc_component_update_bits(component, DA7219_ACCDET_CONFIG_1,
> DA7219_BUTTON_CONFIG_MASK, 0);
>
> + /* Handle the default ground switch delay time */
> da7219_aad_handle_gnd_switch_time(component);
>
> + /* Handle the Jack insertion detection polarity */
> + da7219_aad_handle_polarity(component);
> +
> da7219_aad->aad_wq = create_singlethread_workqueue("da7219-aad");
> if (!da7219_aad->aad_wq) {
> dev_err(component->dev, "Failed to create aad workqueue\n");
> --
> 2.17.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2023-05-04 13:39 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-04 8:22 David Rau
2023-05-04 13:39 ` Mark Brown [this message]
2023-05-12 8:10 David Rau
2023-05-12 16:18 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZFO1eLaz11iLo1Td@finisterre.sirena.org.uk \
--to=broonie@kernel.org \
--cc=David.Rau.opensource@dm.renesas.com \
--cc=alsa-devel@alsa-project.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=support.opensource@diasemi.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®