mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Francesco Dolcini <francesco@dolcini.it>
To: Jerome Neanne <jneanne@baylibre.com>,
	nm@ti.com, lee@kernel.org, tony@atomide.com, vigneshr@ti.com
Cc: afd@ti.com, khilman@baylibre.com, narmstrong@baylibre.com,
	msp@baylibre.com, j-keerthy@ti.com, jneanne@baylibre.com,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
	Wolfram Sang <wsa@kernel.org>,
	linux-i2c@vger.kernel.org
Subject: RCU WARNING on 6.4-rc2, TI AM62 and TPS65219
Date: Fri, 19 May 2023 16:26:58 +0200	[thread overview]
Message-ID: <ZGeHMjlnob2GFyHF@francesco-nb.int.toradex.com> (raw)

Hello all,
while testing 6.4-rc2 (2d1bcbc6cd70) on a TI K3 AM625 SoC with TPS65219
PMIC I noticed this warning.

[   80.117502] systemd-shutdown[1]: All loop devices detached.
[   80.123176] systemd-shutdown[1]: Stopping MD devices.
[   80.128700] systemd-shutdown[1]: All MD devices stopped.
[   80.134123] systemd-shutdown[1]: Detaching DM devices.
[   80.139553] systemd-shutdown[1]: All DM devices detached.
[   80.144970] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[   80.162682] systemd-shutdown[1]: Syncing filesystems and block devices.
[   80.169602] systemd-shutdown[1]: Rebooting.
[   80.173817] kvm: exiting hardware virtualization
[   80.213016] reboot: Restarting system
[   80.216767] ------------[ cut here ]------------
[   80.221380] Voluntary context switch within RCU read-side critical section!
[   80.221404] WARNING: CPU: 0 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x31c/0x390
[   80.237669] Modules linked in: 8021q garp mrp stp llc cfg80211 usb_f_ncm u_ether bluetooth ecdh_generic ecc rfkill sp
idev crct10dif_ce snd_soc_simple_card snd_soc_simple_card_utils rtc_ti_k3 sa2ul sha256_generic libsha256 authenc snd_soc
_davinci_mcasp snd_soc_ti_udma snd_soc_ti_edma snd_soc_ti_sdma ti_ads1015 ina2xx industrialio_triggered_buffer pwm_tiehr
pwm snd_soc_nau8822 tps65219_pwrbutton lm75 kfifo_buf spi_omap2_mcspi rtc_ds1307 libcomposite fuse drm ipv6
[   80.278507] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.4.0-rc2-00166-gf932e7bb873b #3
[   80.286938] Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT)
[   80.294238] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   80.301193] pc : rcu_note_context_switch+0x31c/0x390
[   80.306154] lr : rcu_note_context_switch+0x31c/0x390
[   80.311114] sp : ffff80000a71b4c0
[   80.314422] x29: ffff80000a71b4c0 x28: 0000000000000000 x27: ffff000000118000
[   80.321556] x26: 0000000000000000 x25: ffff000000118000 x24: ffff800008fafbd8
[   80.328689] x23: ffff000000118000 x22: 0000000000000000 x21: ffff000000118000
[   80.335822] x20: 0000000000000000 x19: ffff00003fd68cc0 x18: 0000000000000010
[   80.342955] x17: 0000000000000000 x16: 0000000000000000 x15: ffff000000118000
[   80.350087] x14: 00000000000001c5 x13: ffff000000118478 x12: 00000000ffffffea
[   80.357220] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffff80000a2a9a98
[   80.364352] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 000000000000bff4
[   80.371485] x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : 0000000000000000
[   80.378617] x2 : ffff80000a251990 x1 : 0000000000000000 x0 : 0000000000000000
[   80.385751] Call trace:
[   80.388193]  rcu_note_context_switch+0x31c/0x390
[   80.392807]  __schedule+0x98/0xa7c
[   80.396214]  schedule+0x5c/0xc4
[   80.399354]  schedule_timeout+0x180/0x25c
[   80.403362]  wait_for_completion_timeout+0x80/0x15c
[   80.408238]  ti_sci_set_device_state+0xb4/0x1e4
[   80.412771]  ti_sci_cmd_get_device_exclusive+0x18/0x24
[   80.417907]  ti_sci_pd_power_on+0x28/0x48
[   80.421914]  _genpd_power_on+0x94/0x154
[   80.425749]  genpd_power_on.part.0+0xa4/0x174
[   80.430104]  genpd_runtime_resume+0x118/0x294
[   80.434457]  __rpm_callback+0x48/0x140
[   80.438206]  rpm_callback+0x6c/0x78
[   80.441692]  rpm_resume+0x3bc/0x59c
[   80.445179]  __pm_runtime_resume+0x4c/0x90
[   80.449272]  omap_i2c_xfer_common+0x38/0x598
[   80.453540]  omap_i2c_xfer_polling+0x14/0x20
[   80.457804]  __i2c_transfer+0x138/0x35c
[   80.461642]  i2c_transfer+0x94/0xf4
[   80.465130]  regmap_i2c_read+0x60/0xa8
[   80.468879]  _regmap_raw_read+0xf0/0x170
[   80.472799]  _regmap_bus_read+0x44/0x7c
[   80.476632]  _regmap_read+0x64/0xf4
[   80.480118]  _regmap_update_bits+0xf4/0x130
[   80.484298]  regmap_update_bits_base+0x64/0x98
[   80.488738]  tps65219_restart+0x38/0x48
[   80.492576]  atomic_notifier_call_chain+0x60/0x90
[   80.497280]  do_kernel_restart+0x24/0x30
[   80.501202]  machine_restart+0x38/0x5c
[   80.504950]  kernel_restart+0x88/0x98
[   80.508612]  __do_sys_reboot+0x1e0/0x264
[   80.512533]  __arm64_sys_reboot+0x24/0x30
[   80.516538]  invoke_syscall+0x44/0x104
[   80.520287]  el0_svc_common.constprop.0+0x44/0xec
[   80.524988]  do_el0_svc+0x38/0x98
[   80.528302]  el0_svc+0x2c/0x84
[   80.531354]  el0t_64_sync_handler+0xb8/0xbc
[   80.535534]  el0t_64_sync+0x190/0x194
[   80.539192] ---[ end trace 0000000000000000 ]---


This looks similar to what is described here [1], same issue or
something else? Any suggestion?

The issue is systematic and happens at every boot. With a TI downstream
5.10 kernel this issue was never experienced.

Francesco

[1] https://lore.kernel.org/all/20230327-tegra-pmic-reboot-v6-0-af44a4cd82e9@skidata.com/


             reply	other threads:[~2023-05-19 14:27 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-19 14:26 Francesco Dolcini [this message]
2023-05-22  9:27 ` jerome Neanne
2023-05-22 12:04   ` jerome Neanne
2023-05-22 15:22   ` Francesco Dolcini
2023-05-23 10:05   ` Wadim Egorov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZGeHMjlnob2GFyHF@francesco-nb.int.toradex.com \
    --to=francesco@dolcini.it \
    --cc=afd@ti.com \
    --cc=j-keerthy@ti.com \
    --cc=jneanne@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=msp@baylibre.com \
    --cc=narmstrong@baylibre.com \
    --cc=nm@ti.com \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®