From: Petr Mladek <pmladek@suse.com>
To: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>,
Steven Rostedt <rostedt@goodmis.org>,
Thomas Gleixner <tglx@linutronix.de>,
linux-kernel@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: [PATCH printk v2 8/8] printk: nbcon: Add functions for drivers to mark unsafe regions
Date: Fri, 11 Aug 2023 15:50:10 +0200 [thread overview]
Message-ID: <ZNY8koUN5a9TVzS2@alley> (raw)
In-Reply-To: <20230728000233.50887-9-john.ogness@linutronix.de>
On Fri 2023-07-28 02:08:33, John Ogness wrote:
> From: Thomas Gleixner <tglx@linutronix.de>
>
> For the write_atomic callback, the console driver may have unsafe
> regions that need to be appropriately marked. Provide functions
> that accept the nbcon_write_context struct to allow for the driver
> to enter and exit unsafe regions.
>
> diff --git a/kernel/printk/printk_nbcon.c b/kernel/printk/printk_nbcon.c
> index e1f0e4278ffa..57b7539bbbb2 100644
> --- a/kernel/printk/printk_nbcon.c
> +++ b/kernel/printk/printk_nbcon.c
> @@ -761,7 +761,6 @@ EXPORT_SYMBOL_GPL(nbcon_can_proceed);
> *
> * Internal helper to avoid duplicated code
> */
> -__maybe_unused
> static bool nbcon_context_update_unsafe(struct nbcon_context *ctxt, bool unsafe)
> {
> struct console *con = ctxt->console;
It might be better to define nbcon_context_update_unsafe()
in this patch. I guess that nbcon_enter_unsafe()/nbcon_exit_unsafe()
are the only callers.
> @@ -787,6 +786,46 @@ static bool nbcon_context_update_unsafe(struct nbcon_context *ctxt, bool unsafe)
> return true;
> }
>
> +/**
> + * nbcon_enter_unsafe - Enter an unsafe region in the driver
> + * @wctxt: The write context that was handed to the write function
> + *
> + * Return: True if the state is correct. False if ownership was
> + * handed over or taken.
Same as in 7th patch. I would write:
* Return: True if this context still owns the console. False
if the ownership has been handed over or taken.
> + *
> + * When this function returns false then the calling context is no longer
> + * the owner and is no longer allowed to go forward. In this case it must
> + * back out immediately and carefully. The buffer content is also no longer
> + * trusted since it no longer belongs to the calling context.
> + */
> +bool nbcon_enter_unsafe(struct nbcon_write_context *wctxt)
> +{
> + struct nbcon_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
> +
> + return nbcon_context_update_unsafe(ctxt, true);
> +}
> +EXPORT_SYMBOL_GPL(nbcon_enter_unsafe);
> +
> +/**
> + * nbcon_exit_unsafe - Exit an unsafe region in the driver
> + * @wctxt: The write context that was handed to the write function
> + *
> + * Return: True if the state is correct. False if ownership was
> + * handed over or taken.
Same here.
> + * When this function returns false then the calling context is no longer
> + * the owner and is no longer allowed to go forward. In this case it must
> + * back out immediately and carefully. The buffer content is also no longer
> + * trusted since it no longer belongs to the calling context.
> + */
> +bool nbcon_exit_unsafe(struct nbcon_write_context *wctxt)
> +{
> + struct nbcon_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
> +
> + return nbcon_context_update_unsafe(ctxt, false);
> +}
> +EXPORT_SYMBOL_GPL(nbcon_exit_unsafe);
> +
Best Regards,
Petr
next prev parent reply other threads:[~2023-08-11 13:50 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-28 0:02 [PATCH printk v2 0/8] wire up nbcon consoles John Ogness
2023-07-28 0:02 ` [PATCH printk v2 1/8] printk: Add non-BKL (nbcon) console basic infrastructure John Ogness
2023-07-28 14:47 ` Petr Mladek
2023-07-28 20:51 ` John Ogness
2023-07-31 15:39 ` Petr Mladek
2023-07-31 20:39 ` John Ogness
2023-08-01 10:35 ` Petr Mladek
2023-07-28 0:02 ` [PATCH printk v2 2/8] printk: Provide debug_store() for nbcon debugging John Ogness
2023-07-28 9:52 ` John Ogness
2023-07-28 15:22 ` Petr Mladek
2023-07-28 21:01 ` John Ogness
2023-07-31 15:43 ` Petr Mladek
2023-07-28 0:02 ` [PATCH printk v2 3/8] printk: nbcon: Add acquire/release logic John Ogness
2023-08-09 10:20 ` Petr Mladek
2023-08-29 9:43 ` John Ogness
2023-08-09 12:44 ` hostile takeover: " Petr Mladek
2023-08-29 10:22 ` John Ogness
2023-09-07 15:40 ` Petr Mladek
2023-09-08 14:48 ` John Ogness
2023-07-28 0:02 ` [PATCH printk v2 4/8] printk: nbcon: Add buffer management John Ogness
2023-08-09 14:06 ` Petr Mladek
2023-07-28 0:02 ` [PATCH printk v2 5/8] printk: nbcon: Add sequence handling John Ogness
2023-07-28 1:33 ` kernel test robot
2023-07-28 9:00 ` John Ogness
2023-08-10 9:28 ` Petr Mladek
2023-08-29 11:51 ` John Ogness
2023-07-28 0:02 ` [PATCH printk v2 6/8] printk: nbcon: Add ownership state functions John Ogness
2023-08-10 12:56 ` Petr Mladek
2023-08-29 12:23 ` John Ogness
2023-07-28 0:02 ` [PATCH printk v2 7/8] printk: nbcon: Add emit function and callback function for atomic printing John Ogness
2023-08-11 13:37 ` Petr Mladek
2023-08-29 13:08 ` John Ogness
2023-07-28 0:02 ` [PATCH printk v2 8/8] printk: nbcon: Add functions for drivers to mark unsafe regions John Ogness
2023-08-11 13:50 ` Petr Mladek [this message]
2023-08-29 13:13 ` John Ogness
2023-08-11 13:56 ` [PATCH printk v2 0/8] wire up nbcon consoles Petr Mladek
2023-08-29 13:21 ` John Ogness
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZNY8koUN5a9TVzS2@alley \
--to=pmladek@suse.com \
--cc=gregkh@linuxfoundation.org \
--cc=john.ogness@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rostedt@goodmis.org \
--cc=senozhatsky@chromium.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®