mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Petr Mladek <pmladek@suse.com>
To: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>,
	Steven Rostedt <rostedt@goodmis.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	linux-kernel@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: [PATCH printk v4 8/8] printk: nbcon: Allow drivers to mark unsafe regions and check state
Date: Fri, 15 Sep 2023 10:38:01 +0200	[thread overview]
Message-ID: <ZQQX6V93nJGoBwfJ@alley> (raw)
In-Reply-To: <20230908185008.468566-9-john.ogness@linutronix.de>

On Fri 2023-09-08 20:56:08, John Ogness wrote:
> From: Thomas Gleixner <tglx@linutronix.de>
> 
> For the write_atomic callback, the console driver may have unsafe
> regions that need to be appropriately marked. Provide functions
> that accept the nbcon_write_context struct to allow for the driver
> to enter and exit unsafe regions.
> 
> Also provide a function for drivers to check if they are still the
> owner of the console.
> 
> diff --git a/kernel/printk/nbcon.c b/kernel/printk/nbcon.c
> index e2c274f4142e..04fac73c6e96 100644
> --- a/kernel/printk/nbcon.c
> +++ b/kernel/printk/nbcon.c
> @@ -660,6 +660,32 @@ static bool nbcon_context_can_proceed(struct nbcon_context *ctxt, struct nbcon_s
>  	return false;
>  }
>  
> +/**
> + * nbcon_can_proceed - Check whether ownership can proceed
> + * @wctxt:	The write context that was handed to the write function
> + *
> + * Return:	True if this context still owns the console. False if
> + *		ownership was handed over or taken.
> + *
> + * Must be invoked at appropriate safe places in the driver.

This is a bit vague. I guess that enter_unsafe()/exit_unsafe() will be
used most of the time. The guestion is if this need to be called
in another locations explicitely.

I would write something similar as I suggested for nbcon_context_can_proceed():

  * It is used in nbcon_enter_unsafe() to make sure that it still owns the lock.
  * Also it is used in nbcon_exit_unsafe() to eventually free the lock
  * for a higher priority context which asked for the friendly handover.
  *
  * It can be called inside an unsafe section when the console is just
  * temporary in safe state instead of exiting and entering the unsafe
  * state.
  *
  * Also it can be called in the safe context before doing an expensive
  * safe operation. It does not make sense to do the operation when
  * a higher priority context took the lock.

> + *
> + * When this function returns false then the calling context no longer owns
> + * the console and is no longer allowed to go forward. In this case it must
> + * back out immediately and carefully. The buffer content is also no longer
> + * trusted since it no longer belongs to the calling context.
> + */
> +bool nbcon_can_proceed(struct nbcon_write_context *wctxt)
> +{
> +	struct nbcon_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
> +	struct console *con = ctxt->console;
> +	struct nbcon_state cur;
> +
> +	nbcon_state_read(con, &cur);
> +
> +	return nbcon_context_can_proceed(ctxt, &cur);
> +}
> +EXPORT_SYMBOL_GPL(nbcon_can_proceed);
> +

With the updated comment:

Reviewed-by: Petr Mladek <pmladek@suse.com>

Best Regards,
Petr

      reply	other threads:[~2023-09-15  8:38 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-08 18:50 [PATCH printk v4 0/8] provide nbcon base John Ogness
2023-09-08 18:50 ` [PATCH printk v4 1/8] printk: Add non-BKL (nbcon) console basic infrastructure John Ogness
2023-09-08 18:50 ` [PATCH printk v4 2/8] printk: nbcon: Add acquire/release logic John Ogness
2023-09-14 13:16   ` Petr Mladek
2023-09-14 13:23     ` [PATCH v4 2+/8] " Petr Mladek
2023-09-15 17:01       ` John Ogness
2023-09-08 18:50 ` [PATCH printk v4 3/8] printk: Make static printk buffers available to nbcon John Ogness
2023-09-14 13:29   ` Petr Mladek
2023-09-08 18:50 ` [PATCH printk v4 4/8] printk: nbcon: Add buffer management John Ogness
2023-09-14 14:55   ` Petr Mladek
2023-09-08 18:50 ` [PATCH printk v4 5/8] printk: nbcon: Add ownership state functions John Ogness
2023-09-14 15:38   ` Petr Mladek
2023-09-08 18:50 ` [PATCH printk v4 6/8] printk: nbcon: Add sequence handling John Ogness
2023-09-14 16:02   ` Petr Mladek
2023-09-08 18:50 ` [PATCH printk v4 7/8] printk: nbcon: Add emit function and callback function for atomic printing John Ogness
2023-09-15  8:21   ` Petr Mladek
2023-09-08 18:50 ` [PATCH printk v4 8/8] printk: nbcon: Allow drivers to mark unsafe regions and check state John Ogness
2023-09-15  8:38   ` Petr Mladek [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZQQX6V93nJGoBwfJ@alley \
    --to=pmladek@suse.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=john.ogness@linutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=senozhatsky@chromium.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®