Re: [PATCH v5 05/15] USB: typec: Check for EEPROM present

[Heikki Krogerus <heikki.krogerus@linux.intel.com>]

On Sun, Sep 17, 2023 at 11:26:29AM -0400, Abdel Alkuor wrote:
> From: Abdel Alkuor <abdelalkuor@geotab.com>
> 
> When an EEPROM is present, tps25750 loads the binary configuration from
> EEPROM. Hence, all we need to do is wait for the device to switch to APP
> mode
> 
> Signed-off-by: Abdel Alkuor <abdelalkuor@geotab.com>
> ---
>  drivers/usb/typec/tipd/core.c     | 13 +++++++++++++
>  drivers/usb/typec/tipd/tps6598x.h |  3 +++
>  2 files changed, 16 insertions(+)
> 
> diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
> index fea139c72d6d..b3d4b2b5bf5f 100644
> --- a/drivers/usb/typec/tipd/core.c
> +++ b/drivers/usb/typec/tipd/core.c
> @@ -37,6 +37,7 @@
>  #define TPS_REG_STATUS			0x1a
>  #define TPS_REG_SYSTEM_CONF		0x28
>  #define TPS_REG_CTRL_CONF		0x29
> +#define TPS_REG_BOOT_STATUS		0x2D
>  #define TPS_REG_POWER_STATUS		0x3f
>  #define TPS_REG_RX_IDENTITY_SOP		0x48
>  #define TPS_REG_DATA_STATUS		0x5f
> @@ -897,6 +898,17 @@ static int tps25750_apply_patch(struct tps6598x *tps)
>  	int ret;
>  	unsigned long timeout;
>  	u8 mode;
> +	u64 status = 0;
> +
> +	ret = tps6598x_block_read(tps, TPS_REG_BOOT_STATUS, &status, 5);
> +	if (ret)
> +		return ret;
> +	/*
> +	 * Nothing to be done if the configuration
> +	 * is being loaded from EERPOM
> +	 */
> +	if (status & TPS25750_BOOT_STATUS_I2C_EEPROM_PRESENT)
> +		goto wait_for_app;
>  
>  	ret = tps25750_start_patch_burst_mode(tps);
>  	if (ret) {
> @@ -908,6 +920,7 @@ static int tps25750_apply_patch(struct tps6598x *tps)
>  	if (ret)
>  		return ret;
>  
> +wait_for_app:
>  	timeout = jiffies + msecs_to_jiffies(1000);
>  
>  	do {
> diff --git a/drivers/usb/typec/tipd/tps6598x.h b/drivers/usb/typec/tipd/tps6598x.h
> index 527857549d69..5e942c089c27 100644
> --- a/drivers/usb/typec/tipd/tps6598x.h
> +++ b/drivers/usb/typec/tipd/tps6598x.h
> @@ -199,4 +199,7 @@
>  #define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_A    BIT(2)
>  #define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_B    (BIT(2) | BIT(1))
>  
> +/* BOOT STATUS REG*/
> +#define TPS25750_BOOT_STATUS_I2C_EEPROM_PRESENT	BIT(3)

That's not TPS25750 specific bit, so please rename that to
TPS_BOOT_STATUS_I2C_EEPROM_PRESENT

thanks,

-- 
heikki