mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Abdel Alkuor <alkuor@gmail.com>
Cc: krzysztof.kozlowski+dt@linaro.org, bryan.odonoghue@linaro.org,
	gregkh@linuxfoundation.org, robh+dt@kernel.org,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, conor+dt@kernel.org,
	ryan.eleceng@gmail.com
Subject: Re: [PATCH v6 02/14] USB: typec: Add cmd timeout and response delay
Date: Wed, 27 Sep 2023 10:18:04 +0300	[thread overview]
Message-ID: <ZRPXLBj/Y6+yiwf8@kuha.fi.intel.com> (raw)
In-Reply-To: <ZRPTHeYhdtdtKZ1/@kuha.fi.intel.com>

On Wed, Sep 27, 2023 at 10:00:50AM +0300, Heikki Krogerus wrote:
> On Sat, Sep 23, 2023 at 03:39:47AM -0400, Abdel Alkuor wrote:
> > Some commands in tps25750 take longer than 1 second
> > to complete, and some responses need some delay before
> > the result becomes available.
> > 
> > Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
> 
> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

Hold on!

You are not specifying the driver in the subject. You need to fix
that.

> > ---
> > Changes in v6:
> >   - Use tps6598x_exec_cmd as a wrapper
> > Changes in v5:
> >   - Incorporating tps25750 into tps6598x driver
> > 
> >  drivers/usb/typec/tipd/core.c | 19 +++++++++++++++----
> >  1 file changed, 15 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
> > index 37b56ce75f39..32420c61660d 100644
> > --- a/drivers/usb/typec/tipd/core.c
> > +++ b/drivers/usb/typec/tipd/core.c
> > @@ -282,9 +282,10 @@ static void tps6598x_disconnect(struct tps6598x *tps, u32 status)
> >  	power_supply_changed(tps->psy);
> >  }
> >  
> > -static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> > +static int tps6598x_exec_cmd_tmo(struct tps6598x *tps, const char *cmd,
> >  			     size_t in_len, u8 *in_data,
> > -			     size_t out_len, u8 *out_data)
> > +			     size_t out_len, u8 *out_data,
> > +			     u32 cmd_timeout_ms, u32 res_delay_ms)
> >  {
> >  	unsigned long timeout;
> >  	u32 val;
> > @@ -307,8 +308,7 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> >  	if (ret < 0)
> >  		return ret;
> >  
> > -	/* XXX: Using 1s for now, but it may not be enough for every command. */
> > -	timeout = jiffies + msecs_to_jiffies(1000);
> > +	timeout = jiffies + msecs_to_jiffies(cmd_timeout_ms);
> >  
> >  	do {
> >  		ret = tps6598x_read32(tps, TPS_REG_CMD1, &val);
> > @@ -321,6 +321,9 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> >  			return -ETIMEDOUT;
> >  	} while (val);
> >  
> > +	/* some commands require delay for the result to be available */
> > +	mdelay(res_delay_ms);
> > +
> >  	if (out_len) {
> >  		ret = tps6598x_block_read(tps, TPS_REG_DATA1,
> >  					  out_data, out_len);
> > @@ -345,6 +348,14 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> >  	return 0;
> >  }
> >  
> > +static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
> > +			     size_t in_len, u8 *in_data,
> > +			     size_t out_len, u8 *out_data)
> > +{
> > +	return tps6598x_exec_cmd_tmo(tps, cmd, in_len, in_data,
> > +				     out_len, out_data, 1000, 0);
> > +}
> > +
> >  static int tps6598x_dr_set(struct typec_port *port, enum typec_data_role role)
> >  {
> >  	const char *cmd = (role == TYPEC_DEVICE) ? "SWUF" : "SWDF";
> > -- 
> > 2.34.1
> 
> -- 
> heikki

-- 
heikki

  reply	other threads:[~2023-09-27  7:18 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-23  7:39 [PATCH v6 00/14] Add TPS25750 USB type-C PD controller support Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 01/14] dt-bindings: usb: tps6598x: Add tps25750 Abdel Alkuor
2023-09-23 11:49   ` Krzysztof Kozlowski
2023-09-23  7:39 ` [PATCH v6 02/14] USB: typec: Add cmd timeout and response delay Abdel Alkuor
2023-09-27  7:00   ` Heikki Krogerus
2023-09-27  7:18     ` Heikki Krogerus [this message]
2023-09-27  7:47       ` Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 03/14] USB: typec: Add patch mode to tps6598x Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 04/14] USB: typec: Load TPS25750 patch bundle Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 05/14] USB: typec: Check for EEPROM present Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 06/14] USB: typec: Clear dead battery flag Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 07/14] USB: typec: Apply patch again after power resume Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 08/14] USB: typec: Add interrupt support for TPS25750 Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 09/14] USB: typec: Refactor tps6598x port registration Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 10/14] USB: typec: Add port registration for tps25750 Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 11/14] USB: typec: Enable sleep mode " Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 12/14] USB: typec: Add trace for tps25750 irq Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 13/14] USB: typec: Add power status trace for tps25750 Abdel Alkuor
2023-09-23  7:39 ` [PATCH v6 14/14] USB: typec: Add " Abdel Alkuor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZRPXLBj/Y6+yiwf8@kuha.fi.intel.com \
    --to=heikki.krogerus@linux.intel.com \
    --cc=alkuor@gmail.com \
    --cc=bryan.odonoghue@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=ryan.eleceng@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®