Re: [PATCH AUTOSEL 6.1 12/24] platform/x86: thinkpad_acpi: fix for incorrect fan reporting on some ThinkPad systems

[Pavel Machek <pavel@ucw.cz>]

[-- Attachment #1: Type: text/plain, Size: 9515 bytes --]

Hi!

> [ Upstream commit 66e92e23a72761f5b53f970aeb1badc5fd92fc74 ]
> 
> Some ThinkPad systems ECFW use non-standard addresses for fan control
> and reporting. This patch adds support for such ECFW so that it can report
> the correct fan values.
> Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2.

This is just a new feature, and is > 200 lines. We should not have
this in stable.

BR,
								Pavel





> Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
> Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@gmail.com
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/platform/x86/thinkpad_acpi.c | 98 ++++++++++++++++++++++++----
>  1 file changed, 85 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index 05a55bc31c796..6edd2e294750e 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -8149,8 +8149,19 @@ static struct ibm_struct volume_driver_data = {
>   * 	TPACPI_FAN_WR_TPEC is also available and should be used to
>   * 	command the fan.  The X31/X40/X41 seems to have 8 fan levels,
>   * 	but the ACPI tables just mention level 7.
> + *
> + * TPACPI_FAN_RD_TPEC_NS:
> + *	This mode is used for a few ThinkPads (L13 Yoga Gen2, X13 Yoga Gen2 etc.)
> + *	that are using non-standard EC locations for reporting fan speeds.
> + *	Currently these platforms only provide fan rpm reporting.
> + *
>   */
>  
> +#define FAN_RPM_CAL_CONST 491520	/* FAN RPM calculation offset for some non-standard ECFW */
> +
> +#define FAN_NS_CTRL_STATUS	BIT(2)		/* Bit which determines control is enabled or not */
> +#define FAN_NS_CTRL		BIT(4)		/* Bit which determines control is by host or EC */
> +
>  enum {					/* Fan control constants */
>  	fan_status_offset = 0x2f,	/* EC register 0x2f */
>  	fan_rpm_offset = 0x84,		/* EC register 0x84: LSB, 0x85 MSB (RPM)
> @@ -8158,6 +8169,11 @@ enum {					/* Fan control constants */
>  	fan_select_offset = 0x31,	/* EC register 0x31 (Firmware 7M)
>  					   bit 0 selects which fan is active */
>  
> +	fan_status_offset_ns = 0x93,	/* Special status/control offset for non-standard EC Fan1 */
> +	fan2_status_offset_ns = 0x96,	/* Special status/control offset for non-standard EC Fan2 */
> +	fan_rpm_status_ns = 0x95,	/* Special offset for Fan1 RPM status for non-standard EC */
> +	fan2_rpm_status_ns = 0x98,	/* Special offset for Fan2 RPM status for non-standard EC */
> +
>  	TP_EC_FAN_FULLSPEED = 0x40,	/* EC fan mode: full speed */
>  	TP_EC_FAN_AUTO	    = 0x80,	/* EC fan mode: auto fan control */
>  
> @@ -8168,6 +8184,7 @@ enum fan_status_access_mode {
>  	TPACPI_FAN_NONE = 0,		/* No fan status or control */
>  	TPACPI_FAN_RD_ACPI_GFAN,	/* Use ACPI GFAN */
>  	TPACPI_FAN_RD_TPEC,		/* Use ACPI EC regs 0x2f, 0x84-0x85 */
> +	TPACPI_FAN_RD_TPEC_NS,		/* Use non-standard ACPI EC regs (eg: L13 Yoga gen2 etc.) */
>  };
>  
>  enum fan_control_access_mode {
> @@ -8195,6 +8212,8 @@ static u8 fan_control_desired_level;
>  static u8 fan_control_resume_level;
>  static int fan_watchdog_maxinterval;
>  
> +static bool fan_with_ns_addr;
> +
>  static struct mutex fan_mutex;
>  
>  static void fan_watchdog_fire(struct work_struct *ignored);
> @@ -8325,6 +8344,15 @@ static int fan_get_status(u8 *status)
>  		}
>  
>  		break;
> +	case TPACPI_FAN_RD_TPEC_NS:
> +		/* Default mode is AUTO which means controlled by EC */
> +		if (!acpi_ec_read(fan_status_offset_ns, &s))
> +			return -EIO;
> +
> +		if (status)
> +			*status = s;
> +
> +		break;
>  
>  	default:
>  		return -ENXIO;
> @@ -8341,7 +8369,8 @@ static int fan_get_status_safe(u8 *status)
>  	if (mutex_lock_killable(&fan_mutex))
>  		return -ERESTARTSYS;
>  	rc = fan_get_status(&s);
> -	if (!rc)
> +	/* NS EC doesn't have register with level settings */
> +	if (!rc && !fan_with_ns_addr)
>  		fan_update_desired_level(s);
>  	mutex_unlock(&fan_mutex);
>  
> @@ -8368,7 +8397,13 @@ static int fan_get_speed(unsigned int *speed)
>  
>  		if (likely(speed))
>  			*speed = (hi << 8) | lo;
> +		break;
> +	case TPACPI_FAN_RD_TPEC_NS:
> +		if (!acpi_ec_read(fan_rpm_status_ns, &lo))
> +			return -EIO;
>  
> +		if (speed)
> +			*speed = lo ? FAN_RPM_CAL_CONST / lo : 0;
>  		break;
>  
>  	default:
> @@ -8380,7 +8415,7 @@ static int fan_get_speed(unsigned int *speed)
>  
>  static int fan2_get_speed(unsigned int *speed)
>  {
> -	u8 hi, lo;
> +	u8 hi, lo, status;
>  	bool rc;
>  
>  	switch (fan_status_access_mode) {
> @@ -8396,7 +8431,21 @@ static int fan2_get_speed(unsigned int *speed)
>  
>  		if (likely(speed))
>  			*speed = (hi << 8) | lo;
> +		break;
>  
> +	case TPACPI_FAN_RD_TPEC_NS:
> +		rc = !acpi_ec_read(fan2_status_offset_ns, &status);
> +		if (rc)
> +			return -EIO;
> +		if (!(status & FAN_NS_CTRL_STATUS)) {
> +			pr_info("secondary fan control not supported\n");
> +			return -EIO;
> +		}
> +		rc = !acpi_ec_read(fan2_rpm_status_ns, &lo);
> +		if (rc)
> +			return -EIO;
> +		if (speed)
> +			*speed = lo ? FAN_RPM_CAL_CONST / lo : 0;
>  		break;
>  
>  	default:
> @@ -8899,6 +8948,7 @@ static const struct attribute_group fan_driver_attr_group = {
>  #define TPACPI_FAN_2FAN		0x0002		/* EC 0x31 bit 0 selects fan2 */
>  #define TPACPI_FAN_2CTL		0x0004		/* selects fan2 control */
>  #define TPACPI_FAN_NOFAN	0x0008		/* no fan available */
> +#define TPACPI_FAN_NS		0x0010		/* For EC with non-Standard register addresses */
>  
>  static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
>  	TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1),
> @@ -8917,6 +8967,8 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
>  	TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (2nd gen) */
>  	TPACPI_Q_LNV3('N', '3', '0', TPACPI_FAN_2CTL),	/* P15 (1st gen) / P15v (1st gen) */
>  	TPACPI_Q_LNV3('N', '3', '7', TPACPI_FAN_2CTL),  /* T15g (2nd gen) */
> +	TPACPI_Q_LNV3('R', '1', 'F', TPACPI_FAN_NS),	/* L13 Yoga Gen 2 */
> +	TPACPI_Q_LNV3('N', '2', 'U', TPACPI_FAN_NS),	/* X13 Yoga Gen 2*/
>  	TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN),	/* X1 Tablet (2nd gen) */
>  };
>  
> @@ -8951,18 +9003,27 @@ static int __init fan_init(struct ibm_init_struct *iibm)
>  		return -ENODEV;
>  	}
>  
> +	if (quirks & TPACPI_FAN_NS) {
> +		pr_info("ECFW with non-standard fan reg control found\n");
> +		fan_with_ns_addr = 1;
> +		/* Fan ctrl support from host is undefined for now */
> +		tp_features.fan_ctrl_status_undef = 1;
> +	}
> +
>  	if (gfan_handle) {
>  		/* 570, 600e/x, 770e, 770x */
>  		fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
>  	} else {
>  		/* all other ThinkPads: note that even old-style
>  		 * ThinkPad ECs supports the fan control register */
> -		if (likely(acpi_ec_read(fan_status_offset,
> -					&fan_control_initial_status))) {
> +		if (fan_with_ns_addr ||
> +		    likely(acpi_ec_read(fan_status_offset, &fan_control_initial_status))) {
>  			int res;
>  			unsigned int speed;
>  
> -			fan_status_access_mode = TPACPI_FAN_RD_TPEC;
> +			fan_status_access_mode = fan_with_ns_addr ?
> +				TPACPI_FAN_RD_TPEC_NS : TPACPI_FAN_RD_TPEC;
> +
>  			if (quirks & TPACPI_FAN_Q1)
>  				fan_quirk1_setup();
>  			/* Try and probe the 2nd fan */
> @@ -8971,7 +9032,8 @@ static int __init fan_init(struct ibm_init_struct *iibm)
>  			if (res >= 0 && speed != FAN_NOT_PRESENT) {
>  				/* It responded - so let's assume it's there */
>  				tp_features.second_fan = 1;
> -				tp_features.second_fan_ctl = 1;
> +				/* fan control not currently available for ns ECFW */
> +				tp_features.second_fan_ctl = !fan_with_ns_addr;
>  				pr_info("secondary fan control detected & enabled\n");
>  			} else {
>  				/* Fan not auto-detected */
> @@ -9146,6 +9208,7 @@ static int fan_read(struct seq_file *m)
>  			       str_enabled_disabled(status), status);
>  		break;
>  
> +	case TPACPI_FAN_RD_TPEC_NS:
>  	case TPACPI_FAN_RD_TPEC:
>  		/* all except 570, 600e/x, 770e, 770x */
>  		rc = fan_get_status_safe(&status);
> @@ -9160,13 +9223,22 @@ static int fan_read(struct seq_file *m)
>  
>  		seq_printf(m, "speed:\t\t%d\n", speed);
>  
> -		if (status & TP_EC_FAN_FULLSPEED)
> -			/* Disengaged mode takes precedence */
> -			seq_printf(m, "level:\t\tdisengaged\n");
> -		else if (status & TP_EC_FAN_AUTO)
> -			seq_printf(m, "level:\t\tauto\n");
> -		else
> -			seq_printf(m, "level:\t\t%d\n", status);
> +		if (fan_status_access_mode == TPACPI_FAN_RD_TPEC_NS) {
> +			/*
> +			 * No full speed bit in NS EC
> +			 * EC Auto mode is set by default.
> +			 * No other levels settings available
> +			 */
> +			seq_printf(m, "level:\t\t%s\n", status & FAN_NS_CTRL ? "unknown" : "auto");
> +		} else {
> +			if (status & TP_EC_FAN_FULLSPEED)
> +				/* Disengaged mode takes precedence */
> +				seq_printf(m, "level:\t\tdisengaged\n");
> +			else if (status & TP_EC_FAN_AUTO)
> +				seq_printf(m, "level:\t\tauto\n");
> +			else
> +				seq_printf(m, "level:\t\t%d\n", status);
> +		}
>  		break;
>  
>  	case TPACPI_FAN_NONE:

-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]