From: Daniel Vetter <daniel@ffwll.ch>
To: Paul Cercueil <paul@crapouillou.net>
Cc: "Daniel Vetter" <daniel@ffwll.ch>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Sumit Semwal" <sumit.semwal@linaro.org>,
"Christian König" <christian.koenig@amd.com>,
"Jonathan Corbet" <corbet@lwn.net>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
linux-doc@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
"Andrzej Pietrasiewicz" <andrzej.p@collabora.com>,
linaro-mm-sig@lists.linaro.org, "Nuno Sá" <noname.nuno@gmail.com>,
"Jonathan Cameron" <jic23@kernel.org>,
linux-media@vger.kernel.org
Subject: Re: [PATCH v3 3/4] usb: gadget: functionfs: Add DMABUF import interface
Date: Tue, 9 Jan 2024 14:01:59 +0100 [thread overview]
Message-ID: <ZZ1Dx1Jqbi61_Afb@phenom.ffwll.local> (raw)
In-Reply-To: <31e56028b4d865c60b7c01b2a305b3dd8a21ff7a.camel@crapouillou.net>
On Tue, Jan 09, 2024 at 12:06:58PM +0100, Paul Cercueil wrote:
> Hi Daniel / Sima,
>
> Le lundi 08 janvier 2024 à 20:19 +0100, Daniel Vetter a écrit :
> > On Mon, Jan 08, 2024 at 05:27:33PM +0100, Paul Cercueil wrote:
> > > Le lundi 08 janvier 2024 à 16:29 +0100, Daniel Vetter a écrit :
> > > > On Mon, Jan 08, 2024 at 03:21:21PM +0100, Paul Cercueil wrote:
> > > > > Hi Daniel (Sima?),
> > > > >
> > > > > Le lundi 08 janvier 2024 à 13:39 +0100, Daniel Vetter a écrit :
> > > > > > On Mon, Jan 08, 2024 at 01:00:55PM +0100, Paul Cercueil
> > > > > > wrote:
> > > > > > > +static void ffs_dmabuf_signal_done(struct ffs_dma_fence
> > > > > > > *dma_fence, int ret)
> > > > > > > +{
> > > > > > > + struct ffs_dmabuf_priv *priv = dma_fence->priv;
> > > > > > > + struct dma_fence *fence = &dma_fence->base;
> > > > > > > +
> > > > > > > + dma_fence_get(fence);
> > > > > > > + fence->error = ret;
> > > > > > > + dma_fence_signal(fence);
> > > > > > > +
> > > > > > > + dma_buf_unmap_attachment(priv->attach, dma_fence-
> > > > > > > >sgt,
> > > > > > > dma_fence->dir);
> > > > > > > + dma_fence_put(fence);
> > > > > > > + ffs_dmabuf_put(priv->attach);
> > > > > >
> > > > > > So this can in theory take the dma_resv lock, and if the usb
> > > > > > completion
> > > > > > isn't an unlimited worker this could hold up completion of
> > > > > > future
> > > > > > dma_fence, resulting in a deadlock.
> > > > > >
> > > > > > Needs to be checked how usb works, and if stalling
> > > > > > indefinitely
> > > > > > in
> > > > > > the
> > > > > > io_complete callback can hold up the usb stack you need to:
> > > > > >
> > > > > > - drop a dma_fence_begin/end_signalling annotations in here
> > > > > > - pull out the unref stuff into a separate preallocated
> > > > > > worker
> > > > > > (or at
> > > > > > least the final unrefs for ffs_dma_buf).
> > > > >
> > > > > Only ffs_dmabuf_put() can attempt to take the dma_resv and
> > > > > would
> > > > > have
> > > > > to be in a worker, right? Everything else would be inside the
> > > > > dma_fence_begin/end_signalling() annotations?
> > > >
> > > > Yup. Also I noticed that unlike the iio patches you don't have
> > > > the
> > > > dma_buf_unmap here in the completion path (or I'm blind?), which
> > > > helps a
> > > > lot with avoiding trouble.
> > >
> > > They both call dma_buf_unmap_attachment() in the "signal done"
> > > callback, the only difference I see is that it is called after the
> > > dma_fence_put() in the iio patches, while it's called before
> > > dma_fence_put() here.
> >
> > I was indeed blind ...
> >
> > So the trouble is this wont work because:
> > - dma_buf_unmap_attachment() requires dma_resv_lock. This is a
> > somewhat
> > recent-ish change from 47e982d5195d ("dma-buf: Move
> > dma_buf_map_attachment() to dynamic locking specification"), so
> > maybe
> > old kernel or you don't have full lockdep enabled to get the right
> > splat.
> >
> > - dma_fence critical section forbids dma_resv_lock
> >
> > Which means you need to move this out, but then there's the potential
> > cache management issue. Which current gpu drivers just kinda ignore
> > because it doesn't matter for current use-case, they all cache the
> > mapping
> > for about as long as the attachment exists. You might want to do the
> > same,
> > unless that somehow breaks a use-case you have, I have no idea about
> > that.
> > If something breaks with unmap_attachment moved out of the fence
> > handling
> > then I guess it's high time to add separate cache-management only to
> > dma_buf (and that's probably going to be quite some wiring up, not
> > sure
> > even how easy that would be to do nor what exactly the interface
> > should
> > look like).
>
> Ok. Then I'll just cache the mapping for now, I think.
Yeah I think that's simplest. I did ponder a bit and I don't think it'd be
too much pain to add the cache-management functions for device
attachments/mappings. But it would be quite some typing ...
-Sima
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
next prev parent reply other threads:[~2024-01-09 13:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-08 12:00 [PATCH v3 0/4] usb: gadget: functionfs: " Paul Cercueil
2024-01-08 12:00 ` [PATCH v3 1/4] usb: gadget: Support already-mapped DMA SGs Paul Cercueil
2024-01-08 12:00 ` [PATCH v3 2/4] usb: gadget: functionfs: Factorize wait-for-endpoint code Paul Cercueil
2024-01-08 12:00 ` [PATCH v3 3/4] usb: gadget: functionfs: Add DMABUF import interface Paul Cercueil
2024-01-08 12:28 ` Christian König
2024-01-08 12:39 ` Daniel Vetter
2024-01-08 14:21 ` Paul Cercueil
2024-01-08 15:29 ` Daniel Vetter
2024-01-08 16:27 ` Paul Cercueil
2024-01-08 19:19 ` Daniel Vetter
2024-01-09 11:06 ` Paul Cercueil
2024-01-09 13:01 ` Daniel Vetter [this message]
2024-01-15 12:54 ` Paul Cercueil
2024-01-18 13:56 ` Daniel Vetter
2024-01-18 13:59 ` Daniel Vetter
2024-01-18 19:39 ` Paul Cercueil
2024-01-18 21:05 ` Daniel Vetter
2024-01-08 12:00 ` [PATCH v3 4/4] Documentation: usb: Document FunctionFS DMABUF API Paul Cercueil
2024-01-09 13:08 ` Vegard Nossum
2024-01-17 12:09 ` Paul Cercueil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZZ1Dx1Jqbi61_Afb@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=Michael.Hennerich@analog.com \
--cc=andrzej.p@collabora.com \
--cc=christian.koenig@amd.com \
--cc=corbet@lwn.net \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=linaro-mm-sig@lists.linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=noname.nuno@gmail.com \
--cc=paul@crapouillou.net \
--cc=sumit.semwal@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®