From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Raag Jadav <raag.jadav@intel.com>
Cc: gregkh@linuxfoundation.org, david.m.ertman@intel.com,
ira.weiny@intel.com, lee@kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] mfd: core: Support auxiliary device
Date: Mon, 7 Apr 2025 11:44:50 +0300 [thread overview]
Message-ID: <Z_OQgqt0Wg17N05j@smile.fi.intel.com> (raw)
In-Reply-To: <20250407074614.1665575-1-raag.jadav@intel.com>
On Mon, Apr 07, 2025 at 01:16:14PM +0530, Raag Jadav wrote:
> Extend MFD subsystem to support auxiliary child device. This is useful
> for MFD usecases where parent device is on a discoverable bus and doesn't
> fit into the platform device criteria. Purpose of this implementation is
> to provide discoverable MFDs just enough infrastructure to register
> independent child devices with their own memory and interrupt resources
> without abusing the platform device.
>
> Current support is limited to just PCI type MFDs, but this can be further
> extended to support other types like USB in the future.
> PS: I'm leaning towards not doing any of the ioremap or regmap on MFD
> side and think that we should enforce child devices to not overlap.
Yes, but we will have the cases in the future, whatever,
for the first step it's okay.
> If there's a need to handle common register access by parent device,
> then I think it warrants its own driver which adds auxiliary devices
> along with a custom interface to communicate with them, and MFD on
> AUX is not the right solution for it.
...
> -static const struct device_type mfd_dev_type = {
> - .name = "mfd_device",
> +enum mfd_dev {
> + MFD_AUX_DEV,
> + MFD_PLAT_DEV,
> + MFD_MAX_DEV
> +};
> +
> +static const struct device_type mfd_dev_type[MFD_MAX_DEV] = {
> + [MFD_AUX_DEV] = { .name = "mfd_auxiliary_device" },
> + [MFD_PLAT_DEV] = { .name = "mfd_platform_device" },
> };
This is likely an ABI breakage if anything looks in sysfs for mfd_device.
...
> +static int mfd_remove_devices_fn(struct device *dev, void *data)
> +{
> + if (dev->type == &mfd_dev_type[MFD_AUX_DEV])
> + return mfd_remove_auxiliary_device(dev);
> + else if (dev->type == &mfd_dev_type[MFD_PLAT_DEV])
Redundant 'else'
> + return mfd_remove_platform_device(dev, data);
> +
> + return 0;
> +}
...
> +#ifndef MFD_AUX_H
> +#define MFD_AUX_H
> +
> +#include <linux/auxiliary_bus.h>
> +#include <linux/ioport.h>
> +#include <linux/types.h>
How is this one being used?
> +#define auxiliary_dev_to_mfd_aux_dev(auxiliary_dev) \
> + container_of(auxiliary_dev, struct mfd_aux_device, auxdev)
Missing container_of.h and better to define after the data type as it can be
converted to static inline, if required.
> +/*
> + * Common structure between MFD parent and auxiliary child device.
> + * To be used by leaf drivers to access child device resources.
> + */
> +struct mfd_aux_device {
> + struct auxiliary_device auxdev;
> + struct resource mem;
> + struct resource irq;
> + /* Place holder for other types */
> + struct resource ext;
Why this can't be simply a VLA?
> +};
> +
> +#endif
...
> +/* TODO: Convert the platform device abusers and remove this flag */
> +#define MFD_AUX_TYPE INT_MIN
INT_MIN?! This is a bit unintuitive. BIT(31) sounds better to me.
Or even a plain (decimal) number as PLATFORM_DEVID_* done, for example.
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2025-04-07 8:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-07 7:46 Raag Jadav
2025-04-07 8:44 ` Andy Shevchenko [this message]
2025-04-07 8:45 ` Andy Shevchenko
2025-04-08 8:04 ` Raag Jadav
2025-04-08 8:48 ` Andy Shevchenko
2025-04-08 7:58 ` Raag Jadav
2025-04-08 8:46 ` Andy Shevchenko
2025-04-08 13:54 ` Raag Jadav
2025-04-07 11:32 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z_OQgqt0Wg17N05j@smile.fi.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=david.m.ertman@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=ira.weiny@intel.com \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=raag.jadav@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®