Re: [PATCH v9 5/8] cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0

["Gautham R. Shenoy" <gautham.shenoy@amd.com>]

Hello Perry,

On Tue, Mar 19, 2024 at 04:28:40PM +0800, Perry Yuan wrote:
> The amd-pstate driver cannot work when the min_freq, nominal_freq or
> the max_freq is zero. When this happens it is prudent to error out
> early on rather than waiting failing at the time of the governor
> initialization.
>

This patch looks good to me.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>

> Signed-off-by: Perry Yuan <perry.yuan@amd.com>
> ---
>  drivers/cpufreq/amd-pstate.c | 16 ++++++++++------
>  1 file changed, 10 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index 132330b4942f..6708c436e1a2 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -839,9 +839,11 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
>  	nominal_freq = READ_ONCE(cpudata->nominal_freq);
>  	lowest_nonlinear_freq = READ_ONCE(cpudata->lowest_nonlinear_freq);
>  
> -	if (min_freq < 0 || max_freq < 0 || min_freq > max_freq) {
> -		dev_err(dev, "min_freq(%d) or max_freq(%d) value is incorrect\n",
> -			min_freq, max_freq);
> +	if (min_freq <= 0 || max_freq <= 0 ||
> +	    nominal_freq <= 0 || min_freq > max_freq) {
> +		dev_err(dev,
> +			"min_freq(%d) or max_freq(%d) or nominal_freq (%d) value is incorrect\n",
> +			min_freq, max_freq, nominal_freq);
>  		ret = -EINVAL;
>  		goto free_cpudata1;
>  	}
> @@ -1299,9 +1301,11 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
>  	max_freq = READ_ONCE(cpudata->max_freq);
>  	nominal_freq = READ_ONCE(cpudata->nominal_freq);
>  	lowest_nonlinear_freq = READ_ONCE(cpudata->lowest_nonlinear_freq);
> -	if (min_freq < 0 || max_freq < 0 || min_freq > max_freq) {
> -		dev_err(dev, "min_freq(%d) or max_freq(%d) value is incorrect\n",
> -				min_freq, max_freq);
> +	if (min_freq <= 0 || max_freq <= 0 ||
> +	    nominal_freq <= 0 || min_freq > max_freq) {
> +		dev_err(dev,
> +			"min_freq(%d) or max_freq(%d) or nominal_freq(%d) value is incorrect\n",
> +			min_freq, max_freq, nominal_freq);
>  		ret = -EINVAL;
>  		goto free_cpudata1;
>  	}
> -- 
> 2.34.1
>

--
Thanks and Regards
gautham.