From: Mark Rutland <mark.rutland@arm.com>
To: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>,
linux-kernel@vger.kernel.org, rcu@vger.kernel.org,
linux-kselftest@vger.kernel.org, lance@osuosl.org
Subject: Re: [PATCH V4] rcutorture: Add CFcommon.arch for the various arch's need
Date: Fri, 21 Jun 2024 12:25:59 +0100 [thread overview]
Message-ID: <ZnVjR0Z9MjHbdlx6@J2N7QTR9R3> (raw)
In-Reply-To: <673d737a-cf17-4480-a9e2-7ff1668f4b44@paulmck-laptop>
On Thu, Jun 20, 2024 at 10:57:27AM -0700, Paul E. McKenney wrote:
> On Wed, Jun 19, 2024 at 11:06:58PM +0000, Zhouyi Zhou wrote:
> > Add CFcommon.arch for the various arch's need for rcutorture.
> >
> > In accordance with [1], [2] and [3], move x86 specific kernel option
> > CONFIG_HYPERVISOR_GUEST to CFcommon.arch, also move kernel option
> > CONFIG_KVM_GUEST which only exists on x86 & PowerPC to CFcommon.arch.
> >
> > [1] https://lore.kernel.org/all/20240427005626.1365935-1-zhouzhouyi@gmail.com/
> > [2] https://lore.kernel.org/all/059d36ce-6453-42be-a31e-895abd35d590@paulmck-laptop/
> > [3] https://lore.kernel.org/all/ZnBkHosMDhsh4H8g@J2N7QTR9R3/
> >
> > Tested in x86_64 and PPC VM of Open Source Lab of Oregon State University.
> >
> > Fixes: a6fda6dab93c ("rcutorture: Tweak kvm options")
> > Suggested-by: Paul E. McKenney <paulmck@kernel.org>
> > Suggested-by: Mark Rutland <mark.rutland@arm.com>
> > Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
>
> Thank you! I have reverted the earlier version to queue this one.
> Please check below to make sure that my usual wordsmithing did not mess
> things up.
>
> Mark, any suggestions for any needed ARM CFcommon.arch files? Or does
> moving out the x86/PowerPC-specific Kconfig options take care of things
> for you guys? (Hey, I can dream, can't I?)
I'm not aware of anything that we specifically need enabled, so pulling
out those bits should be everything -- I've given my Ack below.
> Thanx, Paul
>
> ------------------------------------------------------------------------
>
> commit 9d6767c47ce4de2ef817e47a5882748d8008ebe9
> Author: Zhouyi Zhou <zhouzhouyi@gmail.com>
> Date: Wed Jun 19 23:06:58 2024 +0000
>
> rcutorture: Add CFcommon.arch for arch-specific Kconfig options
>
> Add CFcommon.arch for arch-specific Kconfig options.
>
> In accordance with [1], [2] and [3], move the x86-specific kernel option
> CONFIG_HYPERVISOR_GUEST to CFcommon.i686 and CFcommon.x86_64, and also
> move the x86/PowerPC CONFIG_KVM_GUEST Kconfig option to CFcommon.i686,
> CFcommon.x86_64, and CFcommon.ppc64le.
>
> The "arch" in CFcommon.arch is taken from the "uname -m" command.
>
> [1] https://lore.kernel.org/all/20240427005626.1365935-1-zhouzhouyi@gmail.com/
> [2] https://lore.kernel.org/all/059d36ce-6453-42be-a31e-895abd35d590@paulmck-laptop/
> [3] https://lore.kernel.org/all/ZnBkHosMDhsh4H8g@J2N7QTR9R3/
>
> Tested in x86_64 and PPC VM of Open Source Lab of Oregon State University.
>
> Fixes: a6fda6dab93c ("rcutorture: Tweak kvm options")
> Suggested-by: Paul E. McKenney <paulmck@kernel.org>
> Suggested-by: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Mark.
>
> diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
> index b33cd87536899..ad79784e552d2 100755
> --- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
> +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
> @@ -68,6 +68,8 @@ config_override_param "--gdb options" KcList "$TORTURE_KCONFIG_GDB_ARG"
> config_override_param "--kasan options" KcList "$TORTURE_KCONFIG_KASAN_ARG"
> config_override_param "--kcsan options" KcList "$TORTURE_KCONFIG_KCSAN_ARG"
> config_override_param "--kconfig argument" KcList "$TORTURE_KCONFIG_ARG"
> +config_override_param "$config_dir/CFcommon.$(uname -m)" KcList \
> + "`cat $config_dir/CFcommon.$(uname -m) 2> /dev/null`"
> cp $T/KcList $resdir/ConfigFragment
>
> base_resdir=`echo $resdir | sed -e 's/\.[0-9]\+$//'`
> diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon
> index 0e92d85313aa7..217597e849052 100644
> --- a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon
> +++ b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon
> @@ -1,7 +1,5 @@
> CONFIG_RCU_TORTURE_TEST=y
> CONFIG_PRINTK_TIME=y
> -CONFIG_HYPERVISOR_GUEST=y
> CONFIG_PARAVIRT=y
> -CONFIG_KVM_GUEST=y
> CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n
> CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=n
> diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon.i686 b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon.i686
> new file mode 100644
> index 0000000000000..d8b2f555686fb
> --- /dev/null
> +++ b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon.i686
> @@ -0,0 +1,2 @@
> +CONFIG_HYPERVISOR_GUEST=y
> +CONFIG_KVM_GUEST=y
> diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon.ppc64le b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon.ppc64le
> new file mode 100644
> index 0000000000000..133da04247ee0
> --- /dev/null
> +++ b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon.ppc64le
> @@ -0,0 +1 @@
> +CONFIG_KVM_GUEST=y
> diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon.x86_64 b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon.x86_64
> new file mode 100644
> index 0000000000000..d8b2f555686fb
> --- /dev/null
> +++ b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon.x86_64
> @@ -0,0 +1,2 @@
> +CONFIG_HYPERVISOR_GUEST=y
> +CONFIG_KVM_GUEST=y
next prev parent reply other threads:[~2024-06-21 11:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-19 23:06 Zhouyi Zhou
2024-06-20 17:57 ` Paul E. McKenney
2024-06-21 1:05 ` Zhouyi Zhou
2024-06-21 11:25 ` Mark Rutland [this message]
2024-06-21 12:30 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZnVjR0Z9MjHbdlx6@J2N7QTR9R3 \
--to=mark.rutland@arm.com \
--cc=lance@osuosl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=paulmck@kernel.org \
--cc=rcu@vger.kernel.org \
--cc=zhouzhouyi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®