From: Niklas Cassel <cassel@kernel.org>
To: Frank Li <Frank.li@nxp.com>
Cc: Damien Le Moal <dlemoal@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
"open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)"
<linux-ide@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
imx@lists.linux.dev
Subject: Re: [PATCH v2 1/1] dt-bindings: ata: ahci-fsl-qoriq: add fsl,ls1046a-ahci and fsl,ls1012a-ahci
Date: Fri, 12 Jul 2024 19:16:45 +0200 [thread overview]
Message-ID: <ZpFk_aypJG1PAB_7@ryzen.lan> (raw)
In-Reply-To: <ZpFT8mdkQTrixIvA@lizhi-Precision-Tower-5810>
On Fri, Jul 12, 2024 at 12:04:02PM -0400, Frank Li wrote:
> On Fri, Jul 12, 2024 at 05:19:34PM +0200, Niklas Cassel wrote:
> > On Fri, Jul 12, 2024 at 10:29:22AM -0400, Frank Li wrote:
> > > Add missing documented compatible strings 'fsl,ls1046a-ahci' and
> > > 'fsl,ls1012a-ahci'. Allow 'fsl,ls1012a-ahci' to fallback to
> > > 'fsl,ls1043a-ahci'.
> > >
> > > Fix below CHECK_DTB warnings
> > > arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dtb: /soc/sata@3200000: failed to match any schema with compatible: ['fsl,ls1012a-ahci', 'fsl,ls1043a-ahci']
> > >
> > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > ---
> > > Change from v1 to v2
> > > - rework commit message to show fix CHECK_DTB warning.
> > > ---
> > > .../devicetree/bindings/ata/fsl,ahci.yaml | 19 ++++++++++++-------
> > > 1 file changed, 12 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/ata/fsl,ahci.yaml b/Documentation/devicetree/bindings/ata/fsl,ahci.yaml
> > > index 162b3bb5427ed..a244bc603549d 100644
> > > --- a/Documentation/devicetree/bindings/ata/fsl,ahci.yaml
> > > +++ b/Documentation/devicetree/bindings/ata/fsl,ahci.yaml
> > > @@ -11,13 +11,18 @@ maintainers:
> > >
> > > properties:
> > > compatible:
> > > - enum:
> > > - - fsl,ls1021a-ahci
> > > - - fsl,ls1043a-ahci
> > > - - fsl,ls1028a-ahci
> > > - - fsl,ls1088a-ahci
> > > - - fsl,ls2080a-ahci
> > > - - fsl,lx2160a-ahci
> > > + oneOf:
> > > + - items:
> > > + - const: fsl,ls1012a-ahci
> > > + - const: fsl,ls1043a-ahci
> > > + - enum:
> > > + - fsl,ls1021a-ahci
> > > + - fsl,ls1043a-ahci
> > > + - fsl,ls1046a-ahci
> > > + - fsl,ls1028a-ahci
> > > + - fsl,ls1088a-ahci
> > > + - fsl,ls2080a-ahci
> > > + - fsl,lx2160a-ahci
> >
> > I think that you should add the following Fixes-tag:
> > Fixes: e58e12c5c34c ("dt-bindings: ata: ahci-fsl-qoriq: convert to yaml format")
>
> I am not sure if need it because e58e12c5c34c still not release yet.
> Needn't backport. You may squash into e58e12c5c34c if you like.
Fixes tags are used to indicate that the commit Fixes another commit that
introduced a bug. e58e12c5c34c introduced a bug that wasn't there before,
namely a CHECK_DTB warning.
Cc: stable@vger.kernel.org
is used to indicate that the patch should be backported.
In your case, I would use Fixes:, but without Cc: stable.
Anyway, I could add the Fixes tag if we get a R-b tag from a DT maintainer.
>
> >
> > Considering that the commit that your are fixing is only in libata for-6.11,
> > and has thus never been in a released kernel version, perhaps the following
> > patch would be better (if it also solves the warnings):
> >
> > diff --git a/Documentation/devicetree/bindings/ata/fsl,ahci.yaml b/Documentation/devicetree/bindings/ata/fsl,ahci.yaml
> > index 162b3bb5427e..8953b1847305 100644
> > --- a/Documentation/devicetree/bindings/ata/fsl,ahci.yaml
> > +++ b/Documentation/devicetree/bindings/ata/fsl,ahci.yaml
> > @@ -12,8 +12,10 @@ maintainers:
> > properties:
> > compatible:
> > enum:
> > + - fsl,ls1012a-ahci
> > - fsl,ls1021a-ahci
> > - fsl,ls1043a-ahci
> > + - fsl,ls1046a-ahci
> > - fsl,ls1028a-ahci
> > - fsl,ls1088a-ahci
> > - fsl,ls2080a-ahci
>
> driver have not support "fsl,ls1012a-ahci", which have to fall back to
> "fsl,ls1043a-ahci". and DTS already use
> compatible = "fsl,ls1012a-ahci", "fsl,ls1046a-ahci".
>
> It can't fix 1012's warning. Only fix 1046's warning.
> DT team also don't want to remove fsl,ls1012a-ahci in dts file.
That is not fully true.
Before my proposed patch:
$ ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CHECK_DTBS=y freescale/fsl-ls1012a-qds.dtb
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: sata@3200000: compatible:0: 'fsl,ls1012a-ahci' is not one of ['fsl,ls1021a-ahci', 'fsl,ls1043a-ahci', 'fsl,ls1028a-ahci', 'fsl,ls1088a-ahci', 'fsl,ls2080a-ahci', 'fsl,lx2160a-ahci']
from schema $id: http://devicetree.org/schemas/ata/fsl,ahci.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: sata@3200000: compatible: ['fsl,ls1012a-ahci', 'fsl,ls1043a-ahci'] is too long
from schema $id: http://devicetree.org/schemas/ata/fsl,ahci.yaml#
After my proposed patch:
$ ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CHECK_DTBS=y freescale/fsl-ls1012a-qds.dtb
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: sata@3200000: compatible: ['fsl,ls1012a-ahci', 'fsl,ls1043a-ahci'] is too long
from schema $id: http://devicetree.org/schemas/ata/fsl,ahci.yaml#
So it would only fix one of the two warnings for fsl-ls1012a platforms. I see.
Perhaps you should add this additional warning to your commit message.
So the patch has to look like your suggested patch.
You could possible add '- description: PCIe controller in ls1012a'
in front of:
+ - items:
+ - const: fsl,ls1012a-ahci
+ - const: fsl,ls1043a-ahci
Too make it even clearer that this ugly item-list is only needed for ls1012a,
see e.g.:
https://github.com/torvalds/linux/blob/v6.10-rc7/Documentation/devicetree/bindings/pci/ti%2Cj721e-pci-host.yaml#L18-L21
Kind regards,
Niklas
next prev parent reply other threads:[~2024-07-12 17:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-12 14:29 Frank Li
2024-07-12 15:19 ` Niklas Cassel
2024-07-12 16:04 ` Frank Li
2024-07-12 17:16 ` Niklas Cassel [this message]
2024-07-12 17:16 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZpFk_aypJG1PAB_7@ryzen.lan \
--to=cassel@kernel.org \
--cc=Frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlemoal@kernel.org \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®