From: Petr Mladek <pmladek@suse.com>
To: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>,
Steven Rostedt <rostedt@goodmis.org>,
Thomas Gleixner <tglx@linutronix.de>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH printk v8 30/35] printk: Add helper for flush type logic
Date: Wed, 21 Aug 2024 11:11:32 +0200 [thread overview]
Message-ID: <ZsWvRETyuh1Yq80j@pathway.suse.cz> (raw)
In-Reply-To: <20240820063001.36405-31-john.ogness@linutronix.de>
On Tue 2024-08-20 08:35:56, John Ogness wrote:
> There are many call sites where console flushing occur.
> Depending on the system state and types of consoles, the flush
> methods to use are different. A flush call site generally must
> consider:
>
> @have_boot_console
> @have_nbcon_console
> @have_legacy_console
> @legacy_allow_panic_sync
> is_printk_preferred()
>
> and take into account the current CPU state:
>
> NBCON_PRIO_NORMAL
> NBCON_PRIO_EMERGENCY
> NBCON_PRIO_PANIC
>
> in order to decide if it should:
>
> flush nbcon directly via atomic_write() callback
> flush legacy directly via console_unlock
> flush legacy via offload to irq_work
>
> All of these call sites use their own logic to make this
> decision, which is complicated and error prone. Especially
> later when two more flush methods will be introduced:
>
> flush nbcon via offload to kthread
> flush legacy via offload to kthread
>
> Introduce a new internal struct console_flush_type that
> specifies the flush method(s) that are available for a
> particular call site to use.
The function behaves a bit different in this version of the patch.
The paragraph should be updated according the current description
of the function:
<proposal>
Introduce a new internal struct console_flush_type that specifies which
which console flushing methods should be used in the context of
the caller.
</proposal>
> Introduce a helper function to fill out console_flush_type to
> be used for flushing call sites.
>
> Replace the logic of all flushing call sites to use the new
> helper.
I would add:
<proposal>
This change standardizes behavior, leading to both fixes and optimizations
across various call sites. For instance, in console_cpu_notify(), the new
logic ensures that nbcon consoles are flushed when they aren’t managed
by the legacy loop. Similarly, in console_flush_on_panic(), the system
no longer needs to flush nbcon consoles if none are present.
</proposal>
> Signed-off-by: John Ogness <john.ogness@linutronix.de>
With the above changes:
Reviewed-by: Petr Mladek <pmladek@suse.com>
Best Regards,
Petr
next prev parent reply other threads:[~2024-08-21 9:11 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-20 6:29 [PATCH printk v8 00/35] wire up write_atomic() printing John Ogness
2024-08-20 6:29 ` [PATCH printk v8 01/35] printk: Add notation to console_srcu locking John Ogness
2024-08-20 17:49 ` Paul E. McKenney
2024-09-09 17:28 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 02/35] printk: nbcon: Consolidate alloc() and init() John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 03/35] printk: Properly deal with nbcon consoles on seq init John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for Petr Mladek
2024-08-20 6:29 ` [PATCH printk v8 04/35] printk: Check printk_deferred_enter()/_exit() usage John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for Sebastian Andrzej Siewior
2024-08-20 6:29 ` [PATCH printk v8 05/35] printk: nbcon: Clarify rules of the owner/waiter matching John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 06/35] printk: nbcon: Remove return value for write_atomic() John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 07/35] printk: nbcon: Add detailed doc " John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 08/35] printk: nbcon: Add callbacks to synchronize with driver John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 09/35] printk: nbcon: Use driver synchronization while (un)registering John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 10/35] serial: core: Provide low-level functions to lock port John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 11/35] serial: core: Introduce wrapper to set @uart_port->cons John Ogness
2024-08-20 11:12 ` Ilpo Järvinen
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 12/35] console: Improve console_srcu_read_flags() comments John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 13/35] nbcon: Add API to acquire context for non-printing operations John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 14/35] serial: core: Acquire nbcon context in port->lock wrapper John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 15/35] printk: nbcon: Do not rely on proxy headers John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 16/35] printk: Make console_is_usable() available to nbcon.c John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 17/35] printk: Let console_is_usable() handle nbcon John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 18/35] printk: Add @flags argument for console_is_usable() John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 19/35] printk: nbcon: Add helper to assign priority based on CPU state John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 20/35] printk: nbcon: Provide function to flush using write_atomic() John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for Thomas Gleixner
2024-08-20 6:29 ` [PATCH printk v8 21/35] printk: Track registered boot consoles John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 22/35] printk: nbcon: Use nbcon consoles in console_flush_all() John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 23/35] printk: Add is_printk_legacy_deferred() John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 24/35] printk: nbcon: Flush new records on device_release() John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 25/35] printk: Flush nbcon consoles first on panic John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 26/35] printk: nbcon: Add unsafe flushing " John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 27/35] printk: Avoid console_lock dance if no legacy or boot consoles John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 28/35] printk: Track nbcon consoles John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 29/35] printk: Coordinate direct printing in panic John Ogness
2024-08-20 15:21 ` Petr Mladek
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 30/35] printk: Add helper for flush type logic John Ogness
2024-08-21 9:11 ` Petr Mladek [this message]
2024-08-23 5:25 ` John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:29 ` [PATCH printk v8 31/35] printk: nbcon: Implement emergency sections John Ogness
2024-08-27 14:19 ` John Ogness
2024-09-04 10:34 ` Petr Mladek
2024-09-09 17:27 ` [tip: sched/rt] printk: nbcon: Use raw_cpu_ptr() instead of open coding tip-bot2 for John Ogness
2024-09-09 17:27 ` [tip: sched/rt] printk: nbcon: Implement emergency sections tip-bot2 for Thomas Gleixner
2024-08-20 6:29 ` [PATCH printk v8 32/35] panic: Mark emergency section in warn John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for Thomas Gleixner
2024-08-20 6:29 ` [PATCH printk v8 33/35] panic: Mark emergency section in oops John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:30 ` [PATCH printk v8 34/35] rcu: Mark emergency sections in rcu stalls John Ogness
2024-08-20 17:48 ` Paul E. McKenney
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-20 6:30 ` [PATCH printk v8 35/35] lockdep: Mark emergency sections in lockdep splats John Ogness
2024-09-09 17:27 ` [tip: sched/rt] " tip-bot2 for John Ogness
2024-08-21 9:21 ` [PATCH printk v8 00/35] wire up write_atomic() printing Petr Mladek
2024-08-21 9:28 ` Sebastian Andrzej Siewior
2024-08-21 14:09 ` Petr Mladek
2024-08-21 14:20 ` Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZsWvRETyuh1Yq80j@pathway.suse.cz \
--to=pmladek@suse.com \
--cc=john.ogness@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rostedt@goodmis.org \
--cc=senozhatsky@chromium.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®