Re: [PATCH net-next V2 1/5] net: lan743x: Add SFP support check flag

[Raju Lakkaraju <Raju.Lakkaraju@microchip.com>]

Hi Christophe,

Thank you for review the patches.

The 09/11/2024 18:44, Christophe JAILLET wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Le 11/09/2024 à 18:10, Raju Lakkaraju a écrit :
> > Support for SFP in the PCI11x1x devices is indicated by the "is_sfp_support_en"
> > flag in the STRAP register. This register is loaded at power up from the
> > PCI11x1x EEPROM contents (which specify the board configuration).
> > 
> > Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
> > ---
> > Change List:
> > ============
> > V1 -> V2:
> >    - Change variable name from "chip_rev" to "fpga_rev"
> > V0 -> V1:
> >    - No changes
> > 
> >   drivers/net/ethernet/microchip/lan743x_main.c | 34 +++++++++++++++----
> >   drivers/net/ethernet/microchip/lan743x_main.h |  3 ++
> >   2 files changed, 30 insertions(+), 7 deletions(-)
> > 
> >       netif_dbg(adapter, drv, adapter->netdev,
> >                 "SGMII I/F %sable\n", adapter->is_sgmii_en ? "En" : "Dis");
> > +     netif_dbg(adapter, drv, adapter->netdev,
> > +               "SFP support %sable\n", adapter->is_sfp_support_en ?
> > +               "En" : "Dis");
> 
> Hi,
> 
> Maybe using str_enable_disable() or str_enabled_disabled()?
> 

Accepted. I will use str_enabled_disabled( ).

> CJ
> 
> > +
> > +     return 0;
> >   }
> > 
> 

-- 
Thanks,                                                                         
Raju