Re: [PATCH 3/4] cpufreq/amd-pstate: Use amd_pstate_update_min_max_limit() for EPP limits

["Gautham R. Shenoy" <gautham.shenoy@amd.com>]

Hello Mario,

On Sat, Oct 12, 2024 at 12:45:18PM -0500, Mario Limonciello wrote:
> When the EPP updates are set the maximum capable frequency for the
> CPU is used to set the upper limit instead of that of the policy.
> 
> Adjust amd_pstate_epp_update_limit() to reuse policy calculation code
> from amd_pstate_update_min_max_limit().
> 
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>

Looks good to me.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>

--
Thanks and Regards
gautham.

> ---
>  drivers/cpufreq/amd-pstate.c | 19 +++----------------
>  1 file changed, 3 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index 13dec8b1e7a8..8d2541f2c74b 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -1485,26 +1485,13 @@ static void amd_pstate_epp_cpu_exit(struct cpufreq_policy *policy)
>  static int amd_pstate_epp_update_limit(struct cpufreq_policy *policy)
>  {
>  	struct amd_cpudata *cpudata = policy->driver_data;
> -	u32 max_perf, min_perf, min_limit_perf, max_limit_perf;
> +	u32 max_perf, min_perf;
>  	u64 value;
>  	s16 epp;
>  
> -	if (cpudata->boost_supported && !policy->boost_enabled)
> -		max_perf = READ_ONCE(cpudata->nominal_perf);
> -	else
> -		max_perf = READ_ONCE(cpudata->highest_perf);
> +	max_perf = READ_ONCE(cpudata->highest_perf);
>  	min_perf = READ_ONCE(cpudata->lowest_perf);
> -	max_limit_perf = div_u64(policy->max * max_perf, policy->cpuinfo.max_freq);
> -	min_limit_perf = div_u64(policy->min * max_perf, policy->cpuinfo.max_freq);
> -
> -	if (min_limit_perf < min_perf)
> -		min_limit_perf = min_perf;
> -
> -	if (max_limit_perf < min_limit_perf)
> -		max_limit_perf = min_limit_perf;
> -
> -	WRITE_ONCE(cpudata->max_limit_perf, max_limit_perf);
> -	WRITE_ONCE(cpudata->min_limit_perf, min_limit_perf);
> +	amd_pstate_update_min_max_limit(policy);
>  
>  	max_perf = clamp_t(unsigned long, max_perf, cpudata->min_limit_perf,
>  			cpudata->max_limit_perf);
> -- 
> 2.43.0
>