Re: [PATCH] mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode

[Adrian Hunter <adrian.hunter@intel.com>]

On 24/06/21 7:30 pm, Al Cooper wrote:
> When an eMMC device is being run in HS400 mode, any access to the
> RPMB device will cause the error message "mmc1: Invalid UHS-I mode
> selected". This happens as a result of tuning being disabled before
> RPMB access and then re-enabled after the RPMB access is complete.
> When tuning is re-enabled, the system has to switch from HS400
> to HS200 to do the tuning and then back to HS400. As part of
> sequence to switch from HS400 to HS200 the system is temporarily
> put into HS mode. When switching to HS mode, sdhci_get_preset_value()
> is called and does not have support for HS mode and prints the warning
> message and returns the preset for SDR12. The fix is to add support
> for MMC and SD HS modes to sdhci_get_preset_value().
> 
> This can be reproduced on any system running eMMC in HS400 mode
> (not HS400ES) by using the "mmc" utility to run the following
> command: "mmc rpmb read-counter /dev/mmcblk0rpmb".
> 
> Signed-off-by: Al Cooper <alcooperx@gmail.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci.c | 4 ++++
>  drivers/mmc/host/sdhci.h | 1 +
>  2 files changed, 5 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index bf238ade1602..6b39126fbf06 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1812,6 +1812,10 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
>  	u16 preset = 0;
>  
>  	switch (host->timing) {
> +	case MMC_TIMING_MMC_HS:
> +	case MMC_TIMING_SD_HS:
> +		preset = sdhci_readw(host, SDHCI_PRESET_FOR_HIGH_SPEED);
> +		break;
>  	case MMC_TIMING_UHS_SDR12:
>  		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
>  		break;
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 0770c036e2ff..960fed78529e 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -253,6 +253,7 @@
>  
>  /* 60-FB reserved */
>  
> +#define SDHCI_PRESET_FOR_HIGH_SPEED	0x64
>  #define SDHCI_PRESET_FOR_SDR12 0x66
>  #define SDHCI_PRESET_FOR_SDR25 0x68
>  #define SDHCI_PRESET_FOR_SDR50 0x6A
> 
> base-commit: 7426cedc7dad67bf3c71ea6cc29ab7822e1a453f
>