From: Vignesh Raghavendra <vigneshr@ti.com>
To: Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>,
arm-soc <arm@kernel.org>, SoC <soc@kernel.org>
Cc: Tero Kristo <kristo@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, Nishanth Menon <nm@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: [GIT PULL 1/2] arm64: dts: ti: K3 devicetree updates for v6.17
Date: Tue, 15 Jul 2025 20:40:39 +0530 [thread overview]
Message-ID: <a0401460-8c67-4c29-a6cf-fa4bdf33bc7d@ti.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 7084 bytes --]
Hi ARM SoC Maintainers,
The following changes since commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494:
Linux 6.16-rc1 (2025-06-08 13:44:43 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v6.17
for you to fetch changes up to 974e6cfd8d7b61c3fa27a9dd6ed452b7e7a06de9:
arm64: dts: ti: k3-am69-sk: Add idle-states for remaining SERDES instances (2025-07-11 10:09:15 +0530)
----------------------------------------------------------------
TI K3 device tree updates for v6.17
Generic fixes and cleanups:
* Enable overlays for all DTB files
* Enable Schmitt Trigger by default in K3 pinctrl
SoC specific changes:
AM62D
* Add new SoC support and pinctrl entries
AM62
* Remove eMMC High Speed DDR support
* Move eMMC pinmux to top level board file
J784S4/J742S2
* Add Power on BIST (PBSIT) nodes
* Add ACSPCIE1 node
J721S2
* Add McASP support
J722S
* Add alernate audio-refclk0 node
Board changes:
Multiple boards
* Bootphase tags for Ethernet boot support
AM62D2-EVM
* Add new board support
AM62A7-SK
* Fix pinmux for main_uart1
* Add SPI NAND support
AM62P
* Fix PWM_3_DSI GPIO direction, SD pull up, I2C ups on AM62P-Verdin
* Add bootph-all property for Ethernet boot
AM62-Verdin
* Enable pull-ups on I2C buses
AM654-base-board
* Add boot phase tags for various bootmodes
AM64
* Add boot phase tag PCIe EP boot
* Fix PRU-ICSSG Ethernet ports on AM642-PhyBoard-Electra
AM69-SK
* Add idle-states for remaining SERDES instances
J722S-EVM
* Fix USB gpio-hog level for Type-C
----------------------------------------------------------------
Alexander Sverdlin (1):
arm64: dts: ti: k3-pinctrl: Enable Schmitt Trigger by default
Andrew Davis (1):
arm64: dts: ti: Enable overlays for all DTB files
Bryan Brattlof (3):
arm64: dts: ti: k3-am65: add boot phase tags
arm64: dts: ti: k3-am654-base-board: add boot phase tags
arm64: dts: ti: k3-am62a7-sk: add boot phase tags
Chintan Vankar (4):
arm64: dts: ti: k3-am68-sk-base-board: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-am62p5-sk: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-j722s-evm: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-am69-sk: Add bootph-all property to enable Ethernet boot
Emanuele Ghidoli (2):
arm64: dts: ti: k3-am62-verdin: Enable pull-ups on I2C buses
arm64: dts: ti: k3-am62p-verdin: Enable pull-ups on I2C_3_HDMI
Francesco Dolcini (1):
arm64: dts: ti: k3-am62p-verdin: add SD_1 CD pull-up
Hong Guan (1):
arm64: dts: ti: k3-am62a7-sk: fix pinmux for main_uart1
Hrushikesh Salunke (2):
arm64: dts: ti: k3-am642-evm-pcie0-ep: Add boot phase tag to "pcie0_ep"
arm64: dts: ti: k3-am69-sk: Add idle-states for remaining SERDES instances
Jayesh Choudhary (1):
arm64: dts: ti: k3-j721s2-main: Add McASP nodes
João Paulo Gonçalves (2):
arm64: dts: ti: k3-am62p-j722s: Enable freq throttling on thermal alert
arm64: dts: ti: k3-am62p-verdin: Adjust temperature trip points
Judith Mendez (2):
arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file
arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR support
Michael Walle (2):
arm64: dts: ti: k3-am62p-j722s: fix pinctrl-single size
arm64: dts: ti: k3-j722s-main: Add audio-refclk0 node
Miquel Raynal (1):
arm64: dts: ti: k3-am62a7-sk: Describe the SPI NAND
Neha Malcom Francis (2):
dt-bindings: soc: ti: bist: Add BIST for K3 devices
arm64: dts: ti: k3-j784s4-j742s2-main-common: Add PBIST_14 node
Paresh Bhagat (4):
arm64: dts: ti: Add bootph property to nodes at source for am62a
dt-bindings: arm: ti: Add AM62D2 SoC and Boards
arm64: dts: ti: Add pinctrl entries for AM62D2 family of SoCs
arm64: dts: ti: Add support for AM62D2-EVM
Parth Pancholi (2):
arm64: dts: ti: k3-j784s4-j742s2-main-common: Add ACSPCIE1 node
arm64: dts: ti: k3-am62p-verdin: fix PWM_3_DSI GPIO direction
Siddharth Vadapalli (1):
arm64: dts: ti: k3-j722s-evm: Fix USB gpio-hog level for Type-C
Wadim Egorov (1):
arm64: dts: ti: k3-am642-phyboard-electra: Fix PRU-ICSSG Ethernet ports
Documentation/devicetree/bindings/arm/ti/k3.yaml | 6 +
Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml | 63 +
arch/arm64/boot/dts/ti/Makefile | 25 +-
arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts | 24 +
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 12 +-
arch/arm64/boot/dts/ti/k3-am625-sk.dts | 24 +
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 13 +
arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 2 +
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 63 +-
arch/arm64/boot/dts/ti/k3-am62d2-evm.dts | 615 ++++++++++
arch/arm64/boot/dts/ti/k3-am62d2.dtsi | 20 +
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi | 51 +
arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi | 32 +-
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 11 +
arch/arm64/boot/dts/ti/k3-am62p5.dtsi | 4 +
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 24 -
arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso | 1 +
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 2 +
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 5 +
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 17 +
arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso | 1 +
arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso | 1 +
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 12 +
arch/arm64/boot/dts/ti/k3-am69-sk.dts | 20 +-
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 90 ++
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 14 +-
arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 9 +
arch/arm64/boot/dts/ti/k3-j722s.dtsi | 4 +
arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi | 16 +
arch/arm64/boot/dts/ti/k3-pinctrl.h | 18 +-
33 files changed, 1138 insertions(+), 65 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml
create mode 100644 arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am62d2.dtsi
--
Regards
Vignesh
https://ti.com/opensource
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 495 bytes --]
next reply other threads:[~2025-07-15 15:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-15 15:10 Vignesh Raghavendra [this message]
2025-07-15 15:14 ` [GIT PULL 2/2] arm64: Kconfig: Updates for v6.17 for TI K3 platforms Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a0401460-8c67-4c29-a6cf-fa4bdf33bc7d@ti.com \
--to=vigneshr@ti.com \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=olof@lixom.net \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®