mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
To: Bruno Thomsen <bruno.thomsen@gmail.com>
Cc: "Per Nørgaard Christensen" <per.christensen@prevas.dk>,
	"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	LKML <linux-kernel@vger.kernel.org>
Subject: battery switch-over detection on pcf2127
Date: Tue, 5 May 2020 21:54:47 +0200	[thread overview]
Message-ID: <a0ed6b56-33b1-b5ab-00d1-268fcd61b754@prevas.dk> (raw)

Hi Bruno

I just noticed your "rtc: pcf2127: add tamper detection support"
(03623b4b04) from 5.4. Unfortunately, clearing the BTSE bit breaks a use
case of ours:

We rely on the battery switch-over detection to distinguish a powerfail
during boot from a PORESET by the external watchdog (in the latter case,
the RTC is still powered throughout, meaning there is no battery
switch-over event). OTOH, we do not use the tamper detection - in fact,
the TS signal is unconnected on our board.

We're currently still on 4.19, but we will eventually upgrade to a
kernel containing the above commit. So I was wondering if we could
figure out a way that would work for both of us - either some CONFIG
knob, or perhaps something in the device-tree. Any ideas?

Rasmus

             reply	other threads:[~2020-05-05 19:54 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-05 19:54 Rasmus Villemoes [this message]
2020-05-05 20:07 ` Alexandre Belloni
2020-05-05 20:38   ` Bruno Thomsen
2020-05-05 21:01     ` Rasmus Villemoes
2020-05-05 22:14       ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a0ed6b56-33b1-b5ab-00d1-268fcd61b754@prevas.dk \
    --to=rasmus.villemoes@prevas.dk \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bruno.thomsen@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=per.christensen@prevas.dk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®