[PATCH 2/4] dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled.

["Lothar Waßmann" <LW@KARO-electronics.de>]

There is no need to have the clock enabled all the time the driver is
loaded.
It will be enabled anyway in mxs_dma_alloc_chan_resources() when a
channel is actually going to be used.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 drivers/dma/mxs-dma.c |    7 ++-----
 1 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
index f228f55..c7574e8 100644
--- a/drivers/dma/mxs-dma.c
+++ b/drivers/dma/mxs-dma.c
@@ -580,7 +580,7 @@ static int __init mxs_dma_init(struct mxs_dma_engine *mxs_dma)
 
 	ret = clk_enable(mxs_dma->clk);
 	if (ret)
-		goto err_out;
+		return ret;
 
 	ret = mxs_reset_block(mxs_dma->base);
 	if (ret)
@@ -604,11 +604,8 @@ static int __init mxs_dma_init(struct mxs_dma_engine *mxs_dma)
 	writel(MXS_DMA_CHANNELS_MASK << MXS_DMA_CHANNELS,
 		mxs_dma->base + HW_APBHX_CTRL1 + MXS_SET_ADDR);
 
-	clk_disable(mxs_dma->clk);
-
-	return 0;
-
 err_out:
+	clk_disable(mxs_dma->clk);
 	return ret;
 }
 
-- 
1.5.6.5