From: "Kumar, Udit" <u-kumar1@ti.com>
To: "Thomas Richard (TI.com)" <thomas.richard@bootlin.com>,
Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
Santosh Shilimkar <ssantosh@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
"Stephen Boyd" <sboyd@kernel.org>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>,
<richard.genoud@bootlin.com>, Prasanth Mantena <p-mantena@ti.com>,
"Abhash Kumar" <a-kumar2@ti.com>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>
Subject: Re: [PATCH v3 3/4] clk: keystone: sci-clk: add restore_context() operation
Date: Tue, 16 Dec 2025 08:25:28 +0530 [thread overview]
Message-ID: <a12c3825-a80e-491f-a862-9cd5151a5f73@ti.com> (raw)
In-Reply-To: <20251205-ti-sci-jacinto-s2r-restore-irq-v3-3-d06963974ad4@bootlin.com>
On 12/5/2025 7:58 PM, Thomas Richard (TI.com) wrote:
> Implement the restore_context() operation to restore the clock rate and the
> clock parent state. The clock rate is saved in sci_clk struct during
> set_rate() operation. The parent index is saved in sci_clk struct during
> set_parent() operation. During clock registration, the core retrieves each
> clock’s parent using get_parent() operation to ensure the internal clock
> tree reflects the actual hardware state, including any configurations made
> by the bootloader. So we also save the parent index in get_parent().
>
> Signed-off-by: Thomas Richard (TI.com) <thomas.richard@bootlin.com>
> ---
> drivers/clk/keystone/sci-clk.c | 42 ++++++++++++++++++++++++++++++++++--------
> 1 file changed, 34 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/clk/keystone/sci-clk.c b/drivers/clk/keystone/sci-clk.c
> index 9d5071223f4cb..428050a05de31 100644
> --- a/drivers/clk/keystone/sci-clk.c
> +++ b/drivers/clk/keystone/sci-clk.c
> @@ -47,6 +47,8 @@ struct sci_clk_provider {
> * @node: Link for handling clocks probed via DT
> * @cached_req: Cached requested freq for determine rate calls
> * @cached_res: Cached result freq for determine rate calls
> + * @parent_id: Parent index for this clock
> + * @rate: Clock rate
> */
> struct sci_clk {
> struct clk_hw hw;
> @@ -58,6 +60,8 @@ struct sci_clk {
> struct list_head node;
> unsigned long cached_req;
> unsigned long cached_res;
> + u8 parent_id;
> + unsigned long rate;
> };
>
> #define to_sci_clk(_hw) container_of(_hw, struct sci_clk, hw)
> @@ -210,10 +214,16 @@ static int sci_clk_set_rate(struct clk_hw *hw, unsigned long rate,
> unsigned long parent_rate)
> {
> struct sci_clk *clk = to_sci_clk(hw);
> + int ret;
> +
> + ret = clk->provider->ops->set_freq(clk->provider->sci, clk->dev_id,
> + clk->clk_id, rate / 10 * 9, rate,
> + rate / 10 * 11);
>
> - return clk->provider->ops->set_freq(clk->provider->sci, clk->dev_id,
> - clk->clk_id, rate / 10 * 9, rate,
> - rate / 10 * 11);
> + if (!ret)
> + clk->rate = rate;
> +
> + return ret;
> }
>
> /**
> @@ -237,9 +247,9 @@ static u8 sci_clk_get_parent(struct clk_hw *hw)
> return 0;
> }
>
> - parent_id = parent_id - clk->clk_id - 1;
> + clk->parent_id = (u8)(parent_id - clk->clk_id - 1);
>
> - return (u8)parent_id;
> + return clk->parent_id;
> }
>
> /**
> @@ -252,12 +262,27 @@ static u8 sci_clk_get_parent(struct clk_hw *hw)
> static int sci_clk_set_parent(struct clk_hw *hw, u8 index)
> {
> struct sci_clk *clk = to_sci_clk(hw);
> + int ret;
>
> clk->cached_req = 0;
>
> - return clk->provider->ops->set_parent(clk->provider->sci, clk->dev_id,
> - clk->clk_id,
> - index + 1 + clk->clk_id);
> + ret = clk->provider->ops->set_parent(clk->provider->sci, clk->dev_id,
> + clk->clk_id,
> + index + 1 + clk->clk_id);
> + if (!ret)
> + clk->parent_id = index;
> +
> + return ret;
> +}
> +
> +static void sci_clk_restore_context(struct clk_hw *hw)
> +{
> + struct sci_clk *clk = to_sci_clk(hw);
> +
> + sci_clk_set_parent(hw, clk->parent_id);
> +
> + if (clk->rate)
> + sci_clk_set_rate(hw, clk->rate, 0);
Mostly looks ok , Please add some warning prints in case of resume path
either of
sci_clk_set_parent/sci_clk_set_rate returned failure
> }
>
> static const struct clk_ops sci_clk_ops = {
> @@ -269,6 +294,7 @@ static const struct clk_ops sci_clk_ops = {
> .set_rate = sci_clk_set_rate,
> .get_parent = sci_clk_get_parent,
> .set_parent = sci_clk_set_parent,
> + .restore_context = sci_clk_restore_context,
> };
>
> /**
>
next prev parent reply other threads:[~2025-12-16 2:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-05 14:28 [PATCH v3 0/4] firmware: ti_sci: Introduce BOARDCFG_MANAGED mode for Jacinto family Thomas Richard (TI.com)
2025-12-05 14:28 ` [PATCH v3 1/4] firmware: ti_sci: add BOARDCFG_MANAGED mode support Thomas Richard (TI.com)
2025-12-16 2:43 ` Kumar, Udit
2025-12-05 14:28 ` [PATCH v3 2/4] firmware: ti_sci: handle IRQ restore in BOARDCFG_MANAGED mode during resume Thomas Richard (TI.com)
2025-12-16 2:47 ` Kumar, Udit
2025-12-17 5:29 ` Dhruva Gole
2025-12-18 10:17 ` Thomas Richard
2025-12-05 14:28 ` [PATCH v3 3/4] clk: keystone: sci-clk: add restore_context() operation Thomas Richard (TI.com)
2025-12-16 2:55 ` Kumar, Udit [this message]
2025-12-05 14:28 ` [PATCH v3 4/4] firmware: ti_sci: restore clock context during resume in BOARDCFG_MANAGED mode Thomas Richard (TI.com)
2025-12-17 6:07 ` Dhruva Gole
2025-12-18 10:19 ` Thomas Richard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a12c3825-a80e-491f-a862-9cd5151a5f73@ti.com \
--to=u-kumar1@ti.com \
--cc=a-kumar2@ti.com \
--cc=gregory.clement@bootlin.com \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nm@ti.com \
--cc=p-mantena@ti.com \
--cc=richard.genoud@bootlin.com \
--cc=sboyd@kernel.org \
--cc=ssantosh@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=thomas.richard@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®