Re: [PATCH 1/8] watchdog: s3c2410: Remove confusing CONFIG prefix from local defines

[Guenter Roeck <linux@roeck-us.net>]

On 02/24/2017 07:11 AM, Krzysztof Kozlowski wrote:
> The CONFIG prefix from defines in the s3c2410_wdt.c might suggest that
> these constants come from Kconfig.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  drivers/watchdog/s3c2410_wdt.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 59e95762a6de..3e216f54cb6f 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -64,8 +64,8 @@
>  #define S3C2410_WTCON_PRESCALE_MASK	(0xff << 8)
>  #define S3C2410_WTCON_PRESCALE_MAX	0xff
>
> -#define CONFIG_S3C2410_WATCHDOG_ATBOOT		(0)
> -#define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME	(15)
> +#define S3C2410_WATCHDOG_ATBOOT		(0)
> +#define S3C2410_WATCHDOG_DEFAULT_TIME	(15)
>
>  #define EXYNOS5_RST_STAT_REG_OFFSET		0x0404
>  #define EXYNOS5_WDT_DISABLE_REG_OFFSET		0x0408
> @@ -79,7 +79,7 @@
>
>  static bool nowayout	= WATCHDOG_NOWAYOUT;
>  static int tmr_margin;
> -static int tmr_atboot	= CONFIG_S3C2410_WATCHDOG_ATBOOT;
> +static int tmr_atboot	= S3C2410_WATCHDOG_ATBOOT;
>  static int soft_noboot;
>  static int debug;
>
> @@ -90,10 +90,10 @@ module_param(soft_noboot, int, 0);
>  module_param(debug,	  int, 0);
>
>  MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
> -		__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
> +		__MODULE_STRING(S3C2410_WATCHDOG_DEFAULT_TIME) ")");
>  MODULE_PARM_DESC(tmr_atboot,
>  		"Watchdog is started at boot time if set to 1, default="
> -			__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
> +			__MODULE_STRING(S3C2410_WATCHDOG_ATBOOT));
>  MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
>  			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
>  MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
> @@ -406,7 +406,7 @@ static struct watchdog_ops s3c2410wdt_ops = {
>  static struct watchdog_device s3c2410_wdd = {
>  	.info = &s3c2410_wdt_ident,
>  	.ops = &s3c2410wdt_ops,
> -	.timeout = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME,
> +	.timeout = S3C2410_WATCHDOG_DEFAULT_TIME,
>  };
>
>  /* interrupt handler code */
> @@ -600,12 +600,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
>  					wdt->wdt_device.timeout);
>  	if (ret) {
>  		started = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
> -					CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
> +					S3C2410_WATCHDOG_DEFAULT_TIME);
>
>  		if (started == 0)
>  			dev_info(dev,
>  			   "tmr_margin value out of range, default %d used\n",
> -			       CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
> +			       S3C2410_WATCHDOG_DEFAULT_TIME);
>  		else
>  			dev_info(dev, "default timer value is out of range, "
>  							"cannot start\n");
>