Re: [syzbot] KASAN: null-ptr-deref Read in phy_disconnect

[Oleksij Rempel <linux@rempel-privat.de>]

Am 31.08.21 um 16:20 schrieb Andrew Lunn:
> On Tue, Aug 31, 2021 at 06:48:45AM -0700, Jakub Kicinski wrote:
>> On Tue, 31 Aug 2021 03:36:23 -0700 syzbot wrote:
>>> Hello,
>>>
>>> syzbot found the following issue on:
>>>
>>> HEAD commit:    9c1587d99f93 usb: isp1760: otg control register access
>>> git tree:       https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing
>>> console output: https://syzkaller.appspot.com/x/log.txt?x=16907291300000
>>> kernel config:  https://syzkaller.appspot.com/x/.config?x=24756feea212a6b0
>>> dashboard link: https://syzkaller.appspot.com/bug?extid=6a916267d9bc5fa2d9a6
>>> compiler:       gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.1
>>> syz repro:      https://syzkaller.appspot.com/x/repro.syz?x=166de449300000
>>> C reproducer:   https://syzkaller.appspot.com/x/repro.c?x=12c5ddce300000
>>>
>>> IMPORTANT: if you fix the issue, please add the following tag to the commit:
>>> Reported-by: syzbot+6a916267d9bc5fa2d9a6@syzkaller.appspotmail.com
>>>
>>> asix 1-1:0.0 eth1: register 'asix' at usb-dummy_hcd.0-1, ASIX AX88178 USB 2.0 Ethernet, 8a:c0:d1:1e:27:4c
>>> usb 1-1: USB disconnect, device number 2
>>> asix 1-1:0.0 eth1: unregister 'asix' usb-dummy_hcd.0-1, ASIX AX88178 USB 2.0 Ethernet
>>> general protection fault, probably for non-canonical address 0xdffffc00000000c3: 0000 [#1] SMP KASAN
>>> KASAN: null-ptr-deref in range [0x0000000000000618-0x000000000000061f]
>>> CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.14.0-rc7-syzkaller #0
>>> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
>>> Workqueue: usb_hub_wq hub_event
>>> RIP: 0010:phy_is_started include/linux/phy.h:947 [inline]
>>> RIP: 0010:phy_disconnect+0x22/0x110 drivers/net/phy/phy_device.c:1097
>>> Code: 0f 1f 84 00 00 00 00 00 55 48 89 fd 53 e8 46 33 68 fe 48 8d bd 18 06 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e c5 00 00 00 8b 9d 18 06 00 00
>>> RSP: 0018:ffffc900001a7780 EFLAGS: 00010206
>>> RAX: dffffc0000000000 RBX: ffff88811a410bc0 RCX: 0000000000000000
>>> RDX: 00000000000000c3 RSI: ffffffff82d9305a RDI: 0000000000000618
>>> RBP: 0000000000000000 R08: 0000000000000055 R09: 0000000000000000
>>> R10: ffffffff814c05fb R11: 0000000000000000 R12: ffff8881063cc300
>>> R13: ffffffff83870d90 R14: ffffffff86805a20 R15: ffffffff868059e0
>>> FS:  0000000000000000(0000) GS:ffff8881f6900000(0000) knlGS:0000000000000000
>>> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>> CR2: 00007fb4c30b3008 CR3: 00000001021e1000 CR4: 00000000001506e0
>>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>>> Call Trace:
>>>  ax88772_unbind+0x51/0x90 drivers/net/usb/asix_devices.c:816
>
> Looking at the console messages:
>
> [   36.456221][   T32] usb 1-1: new high-speed USB device number 2 using dummy_hcd
> [   36.976035][   T32] usb 1-1: New USB device found, idVendor=0df6, idProduct=0056, bcdDevice=42.6c
> [   36.985338][   T32] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [   36.993579][   T32] usb 1-1: Product: syz
> [   36.997817][   T32] usb 1-1: Manufacturer: syz
> [   37.002423][   T32] usb 1-1: SerialNumber: syz
> [   37.013578][   T32] usb 1-1: config 0 descriptor??
> [   37.276018][   T32] asix 1-1:0.0 (unnamed net_device) (uninitialized): invalid hw address, using random
> executing program
> [   37.715517][   T32] asix 1-1:0.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71
> [   37.725693][   T32] asix 1-1:0.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffffb9
> [   37.925418][   T32] asix 1-1:0.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71
> [   37.936461][   T32] asix 1-1:0.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffffb9
> [   38.119561][   T32] asix 1-1:0.0 eth1: register 'asix' at usb-dummy_hcd.0-1, ASIX AX88178 USB 2.0 Ethernet, 8a:c0:d1:1e:27:4c
> [   38.138828][   T32] usb 1-1: USB disconnect, device number 2
> [   38.150689][   T32] asix 1-1:0.0 eth1: unregister 'asix' usb-dummy_hcd.0-1, ASIX AX88178 USB 2.0 Ethernet
>
> So this is a AX88178, and you would expect it to use
> ax88178_bind(). That function never calls ax88772_init_phy() which is
> what connects the PHY to the MAC, and sets priv->phydev.
>
> static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
> {
>         struct asix_common_private *priv = dev->driver_priv;
>
>         phy_disconnect(priv->phydev);
>
> So this passes a NULL pointer.
>
> static const struct driver_info ax88178_info = {
>         .description = "ASIX AX88178 USB 2.0 Ethernet",
>         .bind = ax88178_bind,
>         .unbind = ax88772_unbind,
>         .status = asix_status,
>
> You cannot pair ax88178_bind with ax88772_unbind. Either a
> ax88178_unbind is needed, or ax88772_unbind needs to check for a NULL
> pointer.
>
> 	Andrew
>

Yes, this was fixed following patch:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/drivers/net/usb/asix_devices.c?id=1406e8cb4b05fdc67692b1af2da39d7ca5278713

--
Regards,
Oleksij