From: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com>
To: Robin Murphy <robin.murphy@arm.com>,
Will Deacon <will@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
Joerg Roedel <joro@8bytes.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
iommu <iommu@lists.linux-foundation.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>,
Neil Leeder <nleeder@codeaurora.org>,
Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Subject: Re: [PATCH 1/2] perf/smmuv3: Don't reserve the register space that overlaps with the SMMUv3
Date: Wed, 20 Jan 2021 11:37:05 +0800 [thread overview]
Message-ID: <a2d7d94c-8e4e-d91d-8587-7a5b3594b4ca@huawei.com> (raw)
In-Reply-To: <30665cd6-b438-1d1d-7445-9e45e240f79a@arm.com>
On 2021/1/19 20:32, Robin Murphy wrote:
> On 2021-01-19 01:59, Zhen Lei wrote:
>> Some SMMUv3 implementation embed the Perf Monitor Group Registers (PMCG)
>> inside the first 64kB region of the SMMU. Since SMMU and PMCG are managed
>> by two separate drivers, and this driver depends on ARM_SMMU_V3, so the
>> SMMU driver reserves the corresponding resource first, this driver should
>> not reserve the corresponding resource again. Otherwise, a resource
>> reservation conflict is reported during boot.
>>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>> drivers/perf/arm_smmuv3_pmu.c | 42 ++++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 40 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c
>> index 74474bb322c3f26..dcce085431c6ce8 100644
>> --- a/drivers/perf/arm_smmuv3_pmu.c
>> +++ b/drivers/perf/arm_smmuv3_pmu.c
>> @@ -761,6 +761,44 @@ static void smmu_pmu_get_acpi_options(struct smmu_pmu *smmu_pmu)
>> dev_notice(smmu_pmu->dev, "option mask 0x%x\n", smmu_pmu->options);
>> }
>> +static void __iomem *
>> +smmu_pmu_get_and_ioremap_resource(struct platform_device *pdev,
>> + unsigned int index,
>> + struct resource **out_res)
>> +{
>> + int ret;
>> + void __iomem *base;
>> + struct resource *res;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, index);
>> + if (!res) {
>> + dev_err(&pdev->dev, "invalid resource\n");
>> + return IOMEM_ERR_PTR(-EINVAL);
>> + }
>> + if (out_res)
>> + *out_res = res;
>> +
>> + ret = region_intersects(res->start, resource_size(res),
>> + IORESOURCE_MEM, IORES_DESC_NONE);
>> + if (ret == REGION_INTERSECTS) {
>> + /*
>> + * The resource has already been reserved by the SMMUv3 driver.
>> + * Don't reserve it again, just do devm_ioremap().
>> + */
>> + base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
>> + } else {
>> + /*
>> + * The resource may have not been reserved by any driver, or
>> + * has been reserved but not type IORESOURCE_MEM. In the latter
>> + * case, devm_ioremap_resource() reports a conflict and returns
>> + * IOMEM_ERR_PTR(-EBUSY).
>> + */
>> + base = devm_ioremap_resource(&pdev->dev, res);
>> + }
>
> What if the PMCG driver simply happens to probe first?
There are 4 cases:
1) ARM_SMMU_V3=m, ARM_SMMU_V3_PMU=y
It's not allowed. Becase: ARM_SMMU_V3_PMU depends on ARM_SMMU_V3
config ARM_SMMU_V3_PMU
tristate "ARM SMMUv3 Performance Monitors Extension"
depends on ARM64 && ACPI && ARM_SMMU_V3
2) ARM_SMMU_V3=y, ARM_SMMU_V3_PMU=m
No problem, SMMUv3 will be initialized first.
3) ARM_SMMU_V3=y, ARM_SMMU_V3_PMU=y
vi drivers/Makefile
60 obj-y += iommu/
172 obj-$(CONFIG_PERF_EVENTS) += perf/
This link sequence ensure that SMMUv3 driver will be initialized first.
They are currently at the same initialization level.
4) ARM_SMMU_V3=m, ARM_SMMU_V3_PMU=m
Sorry, I thought module dependencies were generated based on "depends on".
But I tried it today,module dependencies are generated only when symbol
dependencies exist. I should use MODULE_SOFTDEP() to explicitly mark the
dependency. I will send V2 later.
>
> Robin.
>
>> +
>> + return base;
>> +}
>> +
>> static int smmu_pmu_probe(struct platform_device *pdev)
>> {
>> struct smmu_pmu *smmu_pmu;
>> @@ -793,7 +831,7 @@ static int smmu_pmu_probe(struct platform_device *pdev)
>> .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
>> };
>> - smmu_pmu->reg_base = devm_platform_get_and_ioremap_resource(pdev, 0, &res_0);
>> + smmu_pmu->reg_base = smmu_pmu_get_and_ioremap_resource(pdev, 0, &res_0);
>> if (IS_ERR(smmu_pmu->reg_base))
>> return PTR_ERR(smmu_pmu->reg_base);
>> @@ -801,7 +839,7 @@ static int smmu_pmu_probe(struct platform_device *pdev)
>> /* Determine if page 1 is present */
>> if (cfgr & SMMU_PMCG_CFGR_RELOC_CTRS) {
>> - smmu_pmu->reloc_base = devm_platform_ioremap_resource(pdev, 1);
>> + smmu_pmu->reloc_base = smmu_pmu_get_and_ioremap_resource(pdev, 1, NULL);
>> if (IS_ERR(smmu_pmu->reloc_base))
>> return PTR_ERR(smmu_pmu->reloc_base);
>> } else {
>>
>
> .
>
next prev parent reply other threads:[~2021-01-20 3:39 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-19 1:59 [PATCH 0/2] Use another method to avoid resource conflicts between the SMMU and PMCG drivers Zhen Lei
2021-01-19 1:59 ` [PATCH 1/2] perf/smmuv3: Don't reserve the register space that overlaps with the SMMUv3 Zhen Lei
2021-01-19 12:32 ` Robin Murphy
2021-01-20 3:37 ` Leizhen (ThunderTown) [this message]
2021-01-20 9:26 ` Leizhen (ThunderTown)
2021-01-20 13:27 ` Robin Murphy
2021-01-20 14:14 ` Leizhen (ThunderTown)
2021-01-20 15:54 ` Robin Murphy
2021-01-21 2:19 ` Leizhen (ThunderTown)
2021-01-19 1:59 ` [PATCH 2/2] Revert "iommu/arm-smmu-v3: Don't reserve implementation defined register space" Zhen Lei
2021-01-20 15:02 ` Robin Murphy
2021-01-21 2:04 ` Leizhen (ThunderTown)
2021-01-21 12:50 ` Robin Murphy
2021-01-22 2:50 ` Leizhen (ThunderTown)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a2d7d94c-8e4e-d91d-8587-7a5b3594b4ca@huawei.com \
--to=thunder.leizhen@huawei.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jean-philippe@linaro.org \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nleeder@codeaurora.org \
--cc=robin.murphy@arm.com \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®