From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Peter De Schrijver <pdeschrijver@nvidia.com>,
Prashant Gaikwad <pgaikwad@nvidia.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-tegra@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/4] clk: tegra: Add AHB DMA clock entry
Date: Wed, 4 Oct 2017 02:02:38 +0300 [thread overview]
Message-ID: <a2f03a761de34e8b814049b8dcd9791acbca4d6d.1507070638.git.digetx@gmail.com> (raw)
In-Reply-To: <cover.1507070638.git.digetx@gmail.com>
In-Reply-To: <cover.1507070638.git.digetx@gmail.com>
AHB DMA engine presents on Tegra20/30. Add missing clock entries, so that
driver for the AHB DMA controller could be implemented.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/clk/tegra/clk-id.h | 1 +
drivers/clk/tegra/clk-tegra-periph.c | 1 +
drivers/clk/tegra/clk-tegra20.c | 1 +
drivers/clk/tegra/clk-tegra30.c | 1 +
4 files changed, 4 insertions(+)
diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index 689f344377a7..c1661b47bbda 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -12,6 +12,7 @@ enum clk_id {
tegra_clk_amx,
tegra_clk_amx1,
tegra_clk_apb2ape,
+ tegra_clk_ahbdma,
tegra_clk_apbdma,
tegra_clk_apbif,
tegra_clk_ape,
diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 848255cc0209..0bce2bc55f0d 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -823,6 +823,7 @@ static struct tegra_periph_init_data gate_clks[] = {
GATE("timer", "clk_m", 5, 0, tegra_clk_timer, CLK_IS_CRITICAL),
GATE("isp", "clk_m", 23, 0, tegra_clk_isp, 0),
GATE("vcp", "clk_m", 29, 0, tegra_clk_vcp, 0),
+ GATE("ahbdma", "hclk", 33, 0, tegra_clk_ahbdma, 0),
GATE("apbdma", "clk_m", 34, 0, tegra_clk_apbdma, 0),
GATE("kbc", "clk_32k", 36, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_kbc, 0),
GATE("fuse", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse, 0),
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 837e5cbd60e9..42740aad8791 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -522,6 +522,7 @@ static struct tegra_devclk devclks[] __initdata = {
};
static struct tegra_clk tegra20_clks[tegra_clk_max] __initdata = {
+ [tegra_clk_ahbdma] = { .dt_id = TEGRA20_CLK_AHBDMA, .present = true },
[tegra_clk_spdif_out] = { .dt_id = TEGRA20_CLK_SPDIF_OUT, .present = true },
[tegra_clk_spdif_in] = { .dt_id = TEGRA20_CLK_SPDIF_IN, .present = true },
[tegra_clk_sdmmc1] = { .dt_id = TEGRA20_CLK_SDMMC1, .present = true },
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index a2d163f759b4..ee168b0d9023 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -788,6 +788,7 @@ static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = {
[tegra_clk_extern3] = { .dt_id = TEGRA30_CLK_EXTERN3, .present = true },
[tegra_clk_disp1] = { .dt_id = TEGRA30_CLK_DISP1, .present = true },
[tegra_clk_disp2] = { .dt_id = TEGRA30_CLK_DISP2, .present = true },
+ [tegra_clk_ahbdma] = { .dt_id = TEGRA30_CLK_AHBDMA, .present = true },
[tegra_clk_apbdma] = { .dt_id = TEGRA30_CLK_APBDMA, .present = true },
[tegra_clk_rtc] = { .dt_id = TEGRA30_CLK_RTC, .present = true },
[tegra_clk_timer] = { .dt_id = TEGRA30_CLK_TIMER, .present = true },
--
2.14.1
next prev parent reply other threads:[~2017-10-03 23:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-03 23:02 [PATCH v2 0/4] Tegra DMA clocks addition / correction Dmitry Osipenko
2017-10-03 23:02 ` Dmitry Osipenko [this message]
2017-10-03 23:02 ` [PATCH v2 2/4] clk: tegra: Correct parent of the APBDMA clock Dmitry Osipenko
2017-10-03 23:02 ` [PATCH v2 3/4] clk: tegra20: Use common definition of APBDMA clock gate Dmitry Osipenko
2017-10-03 23:02 ` [PATCH v2 4/4] clk: tegra20: Bump SCLK clock rate to 216MHz Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a2f03a761de34e8b814049b8dcd9791acbca4d6d.1507070638.git.digetx@gmail.com \
--to=digetx@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=pdeschrijver@nvidia.com \
--cc=pgaikwad@nvidia.com \
--cc=sboyd@codeaurora.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®