mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Xiaoyao Li <xiaoyao.li@intel.com>, <pbonzini@redhat.com>,
	<seanjc@google.com>
Cc: <kvm@vger.kernel.org>, <rick.p.edgecombe@intel.com>,
	<kai.huang@intel.com>, <reinette.chatre@intel.com>,
	<tony.lindgren@linux.intel.com>, <binbin.wu@linux.intel.com>,
	<dmatlack@google.com>, <isaku.yamahata@intel.com>,
	<nik.borisov@suse.com>, <linux-kernel@vger.kernel.org>,
	<yan.y.zhao@intel.com>, <chao.gao@intel.com>,
	<weijiang.yang@intel.com>
Subject: Re: [PATCH V2 02/12] KVM: x86: Allow the use of kvm_load_host_xsave_state() with guest_state_protected
Date: Thu, 27 Feb 2025 16:14:51 +0200	[thread overview]
Message-ID: <a32e4a47-13bb-40ce-a4b9-f20c6d38cb2d@intel.com> (raw)
In-Reply-To: <27e31afd-2f8e-4f2e-92e3-92e52b956751@intel.com>

On 25/02/25 07:56, Xiaoyao Li wrote:
> On 2/24/2025 7:38 PM, Adrian Hunter wrote:
>> On 20/02/25 12:50, Xiaoyao Li wrote:
>>> On 1/29/2025 5:58 PM, Adrian Hunter wrote:
>>>> From: Sean Christopherson <seanjc@google.com>
>>>>
>>>> Allow the use of kvm_load_host_xsave_state() with
>>>> vcpu->arch.guest_state_protected == true. This will allow TDX to reuse
>>>> kvm_load_host_xsave_state() instead of creating its own version.
>>>>
>>>> For consistency, amend kvm_load_guest_xsave_state() also.
>>>>
>>>> Ensure that guest state that kvm_load_host_xsave_state() depends upon,
>>>> such as MSR_IA32_XSS, cannot be changed by user space, if
>>>> guest_state_protected.
>>>>
>>>> [Adrian: wrote commit message]
>>>>
>>>> Link: https://lore.kernel.org/r/Z2GiQS_RmYeHU09L@google.com
>>>> Signed-off-by: Sean Christopherson <seanjc@google.com>
>>>> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
>>>> ---
>>>> TD vcpu enter/exit v2:
>>>>    - New patch
>>>> ---
>>>>    arch/x86/kvm/svm/svm.c |  7 +++++--
>>>>    arch/x86/kvm/x86.c     | 18 +++++++++++-------
>>>>    2 files changed, 16 insertions(+), 9 deletions(-)
>>>>
>>>> diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
>>>> index 7640a84e554a..b4bcfe15ad5e 100644
>>>> --- a/arch/x86/kvm/svm/svm.c
>>>> +++ b/arch/x86/kvm/svm/svm.c
>>>> @@ -4253,7 +4253,9 @@ static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu,
>>>>            svm_set_dr6(svm, DR6_ACTIVE_LOW);
>>>>          clgi();
>>>> -    kvm_load_guest_xsave_state(vcpu);
>>>> +
>>>> +    if (!vcpu->arch.guest_state_protected)
>>>> +        kvm_load_guest_xsave_state(vcpu);
>>>>          kvm_wait_lapic_expire(vcpu);
>>>>    @@ -4282,7 +4284,8 @@ static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu,
>>>>        if (unlikely(svm->vmcb->control.exit_code == SVM_EXIT_NMI))
>>>>            kvm_before_interrupt(vcpu, KVM_HANDLING_NMI);
>>>>    -    kvm_load_host_xsave_state(vcpu);
>>>> +    if (!vcpu->arch.guest_state_protected)
>>>> +        kvm_load_host_xsave_state(vcpu);
>>>>        stgi();
>>>>          /* Any pending NMI will happen here */
>>>> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
>>>> index bbb6b7f40b3a..5cf9f023fd4b 100644
>>>> --- a/arch/x86/kvm/x86.c
>>>> +++ b/arch/x86/kvm/x86.c
>>>> @@ -1169,11 +1169,9 @@ EXPORT_SYMBOL_GPL(kvm_lmsw);
>>>>      void kvm_load_guest_xsave_state(struct kvm_vcpu *vcpu)
>>>>    {
>>>> -    if (vcpu->arch.guest_state_protected)
>>>> -        return;
>>>> +    WARN_ON_ONCE(vcpu->arch.guest_state_protected);
>>>>          if (kvm_is_cr4_bit_set(vcpu, X86_CR4_OSXSAVE)) {
>>>> -
>>>>            if (vcpu->arch.xcr0 != kvm_host.xcr0)
>>>>                xsetbv(XCR_XFEATURE_ENABLED_MASK, vcpu->arch.xcr0);
>>>>    @@ -1192,13 +1190,11 @@ EXPORT_SYMBOL_GPL(kvm_load_guest_xsave_state);
>>>>      void kvm_load_host_xsave_state(struct kvm_vcpu *vcpu)
>>>>    {
>>>> -    if (vcpu->arch.guest_state_protected)
>>>> -        return;
>>>> -
>>>>        if (cpu_feature_enabled(X86_FEATURE_PKU) &&
>>>>            ((vcpu->arch.xcr0 & XFEATURE_MASK_PKRU) ||
>>>>             kvm_is_cr4_bit_set(vcpu, X86_CR4_PKE))) {
>>>> -        vcpu->arch.pkru = rdpkru();
>>>> +        if (!vcpu->arch.guest_state_protected)
>>>> +            vcpu->arch.pkru = rdpkru();
>>>
>>> this needs justification.
>>
>> It was proposed by Sean here:
>>
>>     https://lore.kernel.org/all/Z2WZ091z8GmGjSbC@google.com/
>>
>> which is part of the email thread referenced by the "Link:" tag above
> 
> IMHO, this change needs to be put in patch 07, which is the better place to justify it.
> 
>>>
>>>>            if (vcpu->arch.pkru != vcpu->arch.host_pkru)
>>>>                wrpkru(vcpu->arch.host_pkru);
>>>>        }
>>>
>>>
>>>> @@ -3916,6 +3912,10 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
>>>>            if (!msr_info->host_initiated &&
>>>>                !guest_cpuid_has(vcpu, X86_FEATURE_XSAVES))
>>>>                return 1;
>>>> +
>>>> +        if (vcpu->arch.guest_state_protected)
>>>> +            return 1;
>>>> +
>>>
>>> this and below change need to be a separate patch. So that we can discuss independently.
>>>
>>> I see no reason to make MSR_IA32_XSS special than other MSRs. When guest_state_protected, most of the MSRs that aren't emulated by KVM are inaccessible by KVM.
>>
>> Yes, TDX will block access to MSR_IA32_XSS anyway because
>> tdx_has_emulated_msr() will return false for MSR_IA32_XSS.
>>
>> However kvm_load_host_xsave_state() is not TDX-specific code and it
>> relies upon vcpu->arch.ia32_xss, so there is reason to block
>> access to it when vcpu->arch.guest_state_protected is true.
> 
> It is TDX specific logic that TDX requires vcpu->arch.ia32_xss unchanged since TDX is going to utilize kvm_load_host_xsave_state() to restore host xsave state and relies on vcpu->arch.ia32_xss to be always the value of XFAM & XSS_MASK.
> 
> So please put this change into the TDX specific patch with the clear justfication.

This patch set is owned by Paolo now, so it is up to him.

>>>
>>>>            /*
>>>>             * KVM supports exposing PT to the guest, but does not support
>>>>             * IA32_XSS[bit 8]. Guests have to use RDMSR/WRMSR rather than
>>>> @@ -4375,6 +4375,10 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
>>>>            if (!msr_info->host_initiated &&
>>>>                !guest_cpuid_has(vcpu, X86_FEATURE_XSAVES))
>>>>                return 1;
>>>> +
>>>> +        if (vcpu->arch.guest_state_protected)
>>>> +            return 1;
>>>> +
>>>>            msr_info->data = vcpu->arch.ia32_xss;
>>>>            break;
>>>>        case MSR_K7_CLK_CTL:
>>>
>>
> 


  reply	other threads:[~2025-02-27 14:15 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-29  9:58 [PATCH V2 00/12] KVM: TDX: TD vcpu enter/exit Adrian Hunter
2025-01-29  9:58 ` [PATCH V2 01/12] x86/virt/tdx: Make tdh_vp_enter() noinstr Adrian Hunter
2025-02-16 18:26   ` Paolo Bonzini
2025-02-27 14:13     ` Adrian Hunter
2025-01-29  9:58 ` [PATCH V2 02/12] KVM: x86: Allow the use of kvm_load_host_xsave_state() with guest_state_protected Adrian Hunter
2025-02-20 10:50   ` Xiaoyao Li
2025-02-24 11:38     ` Adrian Hunter
2025-02-25  5:56       ` Xiaoyao Li
2025-02-27 14:14         ` Adrian Hunter [this message]
2025-03-06 18:04     ` Paolo Bonzini
2025-03-06 20:43       ` Sean Christopherson
2025-03-06 22:34         ` Paolo Bonzini
2025-03-07 23:04           ` Sean Christopherson
2025-03-10 19:08             ` Paolo Bonzini
2025-01-29  9:58 ` [PATCH V2 03/12] KVM: TDX: Set arch.has_protected_state to true Adrian Hunter
2025-02-20 12:35   ` Xiaoyao Li
2025-02-27 14:17     ` Adrian Hunter
2025-01-29  9:58 ` [PATCH V2 04/12] KVM: VMX: Move common fields of struct vcpu_{vmx,tdx} to a struct Adrian Hunter
2025-01-29  9:58 ` [PATCH V2 05/12] KVM: TDX: Implement TDX vcpu enter/exit path Adrian Hunter
2025-02-20 13:16   ` Xiaoyao Li
2025-02-24 12:27     ` Adrian Hunter
2025-02-25  6:15       ` Xiaoyao Li
2025-02-27 18:37         ` Adrian Hunter
2025-03-06 18:19           ` Paolo Bonzini
2025-03-06 19:13             ` Adrian Hunter
2025-01-29  9:58 ` [PATCH V2 06/12] KVM: TDX: vcpu_run: save/restore host state(host kernel gs) Adrian Hunter
2025-01-29  9:58 ` [PATCH V2 07/12] KVM: TDX: restore host xsave state when exit from the guest TD Adrian Hunter
2025-02-25  6:43   ` Xiaoyao Li
2025-02-27 14:29     ` Adrian Hunter
2025-02-28  1:58       ` Xiaoyao Li
2025-01-29  9:58 ` [PATCH V2 08/12] KVM: x86: Allow to update cached values in kvm_user_return_msrs w/o wrmsr Adrian Hunter
2025-02-25  7:00   ` Xiaoyao Li
2025-01-29  9:58 ` [PATCH V2 09/12] KVM: TDX: restore user ret MSRs Adrian Hunter
2025-02-25  7:01   ` Xiaoyao Li
2025-02-27 14:19     ` Adrian Hunter
2025-01-29  9:58 ` [PATCH V2 10/12] KVM: TDX: Disable support for TSX and WAITPKG Adrian Hunter
2025-01-29  9:59 ` [PATCH V2 11/12] KVM: TDX: Save and restore IA32_DEBUGCTL Adrian Hunter
2025-01-29  9:59 ` [PATCH V2 12/12] KVM: x86: Add a switch_db_regs flag to handle TDX's auto-switched behavior Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a32e4a47-13bb-40ce-a4b9-f20c6d38cb2d@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=binbin.wu@linux.intel.com \
    --cc=chao.gao@intel.com \
    --cc=dmatlack@google.com \
    --cc=isaku.yamahata@intel.com \
    --cc=kai.huang@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nik.borisov@suse.com \
    --cc=pbonzini@redhat.com \
    --cc=reinette.chatre@intel.com \
    --cc=rick.p.edgecombe@intel.com \
    --cc=seanjc@google.com \
    --cc=tony.lindgren@linux.intel.com \
    --cc=weijiang.yang@intel.com \
    --cc=xiaoyao.li@intel.com \
    --cc=yan.y.zhao@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®